Fuera de Stock Ask us about availability COMPLEMENTS Lola 186mm Twin Set SS bands BS 185 142.80 € Twin Set Tank Bands made of high-quality stainless steel material with a thickness of 1 mm. The width of the circles is 60 mm and they are tightened up with two M8 screws, which ensure a very solid connection of the bottles. The price is for 1 pair! To order we are able to make tank bands for bottles with Ø173mm, Ø176mm and Ø178mm. Add to cart
Fuera de Stock Ask us about availability COMPLEMENTS Lola 204mm Twin Set SS bands BS 204 142.80 € Twin Set Tank Bands made of high-quality stainless steel material with a thickness of 1 mm. The width of the circles is 60 mm and they are tightened up with two M8 screws, which ensure a very solid connection of the bottles. The price is for 1 pair! To order we are able to make tank bands for bottles with Ø173mm, Ø176mm and Ø178mm. Add to cart
Fuera de Stock On demand TWIN TANKS Lola 2x12 Twin Set Lola2x12 1,162.81 € Twin set 2x12 Concave base assembled with Lola valves, BtS tank bands and Eurocylinders tanks NOTE: the tanks band of the picture are not the ones from Lola. Add to cart
Fuera de Stock on demand Lola Valves Lola Flexible Manifold 300Bar HPI-L HPI-L 300 131.17 € High pressure flexible hose for connecting SCR, PSCR and DIR and GUE rebreathers systems tanks. The stainless steel hose with a 90° swivel elbow for DIN 300 Bar. The hose is designed primarily for air and nitrox. When using TMX, there may be minimal leaks, which are manifested by the appearance of small bubbles on the surface of the hose, but this does... Add to cart
Fuera de Stock Ask us about availability Lola Valves Lola Manifold T-SP 200Bar Valve connector T-SP-200Bar 147.04 € Connection DIN G5/8" 230Bar direct to valve The manifold does not have an insulating valve because you already have one in each side valve, in this way we are able to isolate and eliminate even more failures, such as those of the manifold O-Rings. It is also more robust than conventional manifols. Even more, this manifold allows the twins to be assembled... Add to cart
Fuera de Stock Ask us about availability COMPLEMENTS Lola Nut M8 for Backplate MZD-B 11.57 € Knurled nut M8 to tighten the backplate without using tightening tools. Price per piece. NOTE: the photo shows both sides of the piece for illustrative purposes, the price is ONLY FOR ONE PIECE Add to cart
Fuera de Stock on demand Lola Valves Lola T-SVO 200 BD Nitrox left valve 3/4" T-SVO 200 BD NITROX-L 214.75 € Really robust valve with a design studied to facilitate handling in any environment, no matter how narrow or difficult, significantly increasing the user's speed of action and consequently general safety. It has two outlets, each activated by its own shut-off valve, in this way double outlets can be mounted on single cylinders, twin sets, supports for... Add to cart
Fuera de Stock on demand Lola Valves Lola T-SVO 200 BD Nitrox right valve 3/4" T-SVO 200 BD NITROX-R 214.75 € Really robust valve with a design studied to facilitate handling in any environment, no matter how narrow or difficult, significantly increasing the user's speed of action and consequently general safety. It has two outlets, each activated by its own shut-off valve, in this way double outlets can be mounted on single cylinders, twin sets, supports for... Add to cart
Fuera de Stock Ask us about availability Lola Valves Lola T-SVO 200 Nitrox left valve T-SVO 200 NITROX-L 179.00 € Really robust valve with a design studied to facilitate handling in any environment, no matter how narrow or difficult, significantly increasing the user's speed of action and consequently general safety. It has two outlets, each activated by its own shut-off valve, in this way double outlets can be mounted on single cylinders, twin sets, supports for... Add to cart
Fuera de Stock Ask us about availability Lola Valves Lola T-SVO 200 Nitrox right valve T-SVO 200 NITROX-R 179.00 € Really robust valve with a design studied to facilitate handling in any environment, no matter how narrow or difficult, significantly increasing the user's speed of action and consequently general safety. It has two outlets, each activated by its own shut-off valve, in this way double outlets can be mounted on single cylinders, twin sets, supports for... Add to cart
Fuera de Stock on demand Lola Valves Lola T-SVO 300 BD Air Nitrox valve 3/4" T-SVO 300 BD NITROX-L 214.75 € Really robust valve with a design studied to facilitate handling in any environment, no matter how narrow or difficult, significantly increasing the user's speed of action and consequently general safety. It has two outlets, each activated by its own shut-off valve, in this way double outlets can be mounted on single cylinders, twin sets, supports for... Add to cart
Fuera de Stock on demand Lola Valves Lola T-SVO 300 BD Nitrox right valve 3/4" T-SVO 300 BD NITROX-R 214.75 € Really robust valve with a design studied to facilitate handling in any environment, no matter how narrow or difficult, significantly increasing the user's speed of action and consequently general safety. It has two outlets, each activated by its own shut-off valve, in this way double outlets can be mounted on single cylinders, twin sets, supports for... Add to cart
Fuera de Stock Ask us about availability Lola Valves Lola T-SVO 300 Nitrox left valve T-SVO 300 NITROX-L 179.00 € Really robust valve with a design studied to facilitate handling in any environment, no matter how narrow or difficult, significantly increasing the user's speed of action and consequently general safety. It has two outlets, each activated by its own shut-off valve, in this way double outlets can be mounted on single cylinders, twin sets, supports for... Add to cart
Fuera de Stock Ask us about availability Lola Valves Lola T-SVO 300 Nitrox right valve T-SVO 300 NITROX-R 179.00 € Really robust valve with a design studied to facilitate handling in any environment, no matter how narrow or difficult, significantly increasing the user's speed of action and consequently general safety. It has two outlets, each activated by its own shut-off valve, in this way double outlets can be mounted on single cylinders, twin sets, supports for... Add to cart
Fuera de Stock on demand Lola Valves Lola Valves Set T-SVO 200 BD Nitrox 3/4" SET T-SVO 200 BD NITROX 411.89 € Set of right and left speleo valve for tanks with 3/4'' NPSM thread 200Bar / 2900psi intended mainly for double assembly and SCR devices. Valves are oxygen clean (nitrox). The burst disc port is fitted with a plug. Really robust valve with a design studied to facilitate handling in any environment, no matter how narrow or difficult, significantly... Add to cart
Fuera de Stock on demand Lola Valves Lola Valves Set T-SVO 200 Nitrox SET T-SVO 200 NITROX 344.00 € Set of right and left speleo valve for tanks with M25 thread 200Bar / 2900psi intended mainly for double assembly and SCR devices. Valves are oxygen clean (nitrox). The burst disc port is fitted with a plug. Really robust valve with a design studied to facilitate handling in any environment, no matter how narrow or difficult, significantly increasing the... Add to cart
Fuera de Stock on demand Lola Valves Lola Valves Set T-SVO 300 BD Nitrox 3/4" SET T-SVO 300 BD NITROX 411.89 € Set of right and left speleo valve for tanks with 3/4'' NPSM thread 300Bar / 4350psi intended mainly for double assembly and SCR devices. Valves are oxygen clean (nitrox). The burst disc port is fitted with a plug. Really robust valve with a design studied to facilitate handling in any environment, no matter how narrow or difficult, significantly... Add to cart
Fuera de Stock on demand Lola Valves Lola Valves Set T-SVO 300 Nitrox SET T-SVO 300 NITROX 344.00 € Set of right and left speleo valve for tanks with M25 thread 300Bar / 4350psi intended mainly for double assembly and SCR devices. Valves are oxygen clean (nitrox). The burst disc port is fitted with a plug. Really robust valve with a design studied to facilitate handling in any environment, no matter how narrow or difficult, significantly increasing the... Add to cart
Fuera de Stock -5% New Ask us about availability Tools Magnehelic Digital Manometer 43.405.001 175.86 € 185.12 € Add to cart
Fuera de Stock -5% Ask us about availability Spare parts Scubapro 120º elbow 11.101.003 39.18 € 41.24 € The 120º elbow makes the hose entry more docile, thus allowing the use of shorter hoses without affecting the comfort of the mouthpiece bite. Connections are standard 9/16" Add to cart
Fuera de Stock New Ask us about availability inicio Scubapro 2ª etapa C370 Color 11.371.000 214.05 € The Scubapro C370 second stage has been aesthetically updated, offering the option to customize its color to your liking. The front panel has been redesigned with a removable frame, allowing you to easily change its color from among six available (optional) colors. The second stage comes with a gray frame, and the rings are sold separately. Check out the... Add to cart
Fuera de Stock -5% Ask us about availability inicio Scubapro 3 hoses holder 21.300.100 6.99 € 7.36 € Keep your hoses tidy with this handy triple clip Add to cart
Fuera de Stock -5% Ask us about availability Pressure Gauge Scubapro 3-Gauge In-line Dive Console 05.023.353 242.60 € 255.37 € Three-gauge console with compact, plastic-case pressure gauge, easy-to-read depth gauge and FS-2 compass. Perfect for the diver who values convenience, accuracy, and style. Compact pressure gauge (0-400bar). 35-degree tilt, oil-filled compass. Oil-filled analog depth gauge with linear Bourdon tube design. Metric/Bar, Compass Add to cart
Fuera de Stock -5% Ask us about availability Pressure Gauge Scubapro 3-Gauge In-line Dive Console 05.011.714 187.64 € 197.52 € Three-gauge console with compact, plastic-case pressure gauge, easy-to-read depth gauge and FS-1.5 compass. Perfect for the diver who values convenience, accuracy, and style. Compact pressure gauge (0-400bar). 26-degree tilt, oil-filled compass. Oil-filled analog depth gauge with linear Bourdon tube design. Metric/Bar, Compass Add to cart