DIVE GEAR

LIGHTING

JACKETS

REGULATORS

BACKPLATES/WINGS

SUITS

Sidemount/Caving

Adjustable Fins

Foot Pocket Fins

MASK

COMPUTERS

REGULATOR HOSE (Rubber & Miflex)

CONTROL INSTRUMENTS

DECO ESSENTIALS

REELS, WETNOTES, BUOYS...

Knifes & Cutters

BUNGEE MOUNTS/COMPASS

Sealing systems

DRYSUIT INFLATOR SYSTEMS

TANKS/VALVES

STEEL HARDWARE

pee-valve, condoms, quick connec

Gas fills, analysis & decanting

ANALYZERS

ADAPTERS

Transport bags

Hygiene and Care

Weight

Tools

Face Mask

Miscellaneous

Compressors

Pre Owned

Scooters

Outlet

Lifting Balloons

En Stock

Available

inflation and exhaust valves

Sitech on/off dump valve

13320

25.34 €

En Stock

Available

SI TECH

Sitech Quick Clamp

Sitech 60930

19.09 €

Docking system for latex seals xed to the suit. Quick Clamp makes your drysuit compatible with the Quick Glove system. Attaches to the latex seals of the drysuit without tools or glue. Comes with a variety of Spanner Rings suited for a variety of seals. Instructions manual (1a):

En Stock

Available

SPARE PARTS

Sitech Quick Cuff Stiff Ring

Sitech 60200

7.66 €

Quick Cuff seals base

En Stock

Available

SPARE PARTS

Sitech Quick Cuff Wrist Ring (PU-Ring)

Sitech 60420

8.61 €

PU-Ring used in the systems Quick Cuff

En Stock

Available

inflation and exhaust valves

Sitech Shell Inflation Valve

43.84 €

En Stock

Available

SI TECH

Sitech Silicone Neck Seal

24.00 €

En Stock

Available

inflation and exhaust valves

Sitech Skeleton inflation valve

46.89 €

Two options available 21780 ref.: hight push button 21730 ref.: low profile botton

En Stock

Available

SI TECH

Sitech SLÄGGÖ PU RIng

60710

10.05 €

Fuera de Stock

Ask us about availability

SI TECH

Sitech Slide inflation valve

46.50 €

The Slide Inflation Valve is a high performance valve suitable for all areas of recreational and technical diving. The design of the housing makes it easy to locate and the slide button ables the diver to inflate a smooth flow of gas and fully control the buoyancy. The construction of the filter lid makes the Slide Inflation Valve suitable to use in...

Fuera de Stock

Out-of-Stock

Spare parts

Sitech String Dump Valve

13350WN

31.84 €

Spring loaded Dump Valve with twin check valves and cord. Intended for use in inflatable units such as rebreathers, lift bags, BCD´s etc. Double check valves reduce water intrusion to a minimum. A moving pressure plate prevents the check valve from tacking to the spring retainer when dumping manually.This Dump Valve is designed to be fitted in a Weld nut.

View

Fuera de Stock

Ask us about availability

inflation and exhaust valves

Sitech Thetis exhaust valve

49.31 €

En Stock

Available

pee-valve, condoms, quick connec

Sitech TRIGON, Pee-Valve Tube

11951

19.18 €

Use a Pee Valve and extend your bottom time. No use having loads of breathing gas when nature prevents you from concentrating. Long working hours and deco times are no longer a problem. Relieve yourself in a donned drysuit!

En Stock

Available

inflation and exhaust valves

Sitech Valve Attachment Tool (1 unit)

18222

12.40 €

Valve Attachment Tools are recommended to enhance the grip when detaching and/or reattaching SI TECH valves and Blanking plug. Note! Sold in pcs, not a pair. Two pcs are needed for most valves.

En Stock

Available

SI TECH

Sitech Weld nut

11032

6.34 €

This Weld nut is intended for welded attachment of valves. The Weld nut demands an O-ring for proper sealing properties. (O-ring item no: 80088 included.) TECHNICAL SPECIFICATION PU Outer diameter: 64 mm Inner thread: M33 x 1,5 Fits all SI TECH valves Note: the color could be black or translucent white. The two sides of the port are shown, the price...

En Stock

Available

SI TECH

Sitech, Anti-friction washer

11016

2.44 €

Anti-friction washer for Inflation and Exhaust Valves. TECHNICAL SPECIFICATION Outer diameter: 64 mm Inner diameter: 33,5 cm For all Inflation and Exhaust Valves

En Stock

Available

SI TECH

Sitech, external rubber valve port

60805

9.12 €

External Valve port for attachment to trilaminate- and rubber drysuits. TECHNICAL SPECIFICATION Neoprene rubber Outer diameter: 100 mm Inner diameter: 33 mm Dual groove Fits all SI TECH valves NOTA: La imagen muestra las dos caras del asiento, el precio mostrado corresponde a un asiento.

En Stock

Available

SI TECH

Sitech, external valve port 75mmø

60885

6.02 €

This Valve port can either be glued or welded to trilaminate drysuits. TECHNICAL SPECIFICATION Polyurethane Outer diameter: 75 mm Inner diameter: 33 mm Dual groove Fits all SI TECH valves

En Stock

Available

inflation and exhaust valves

Sitech, external valve port 85mmø

60895

5.21 €

This Valve port can either be glued or welded to trilaminate drysuits. TECHNICAL SPECIFICATION Polyurethane Outer diameter: 85 mm Inner diameter: 33 mm Dual groove Fits all SI TECH valves

En Stock

Available

SI TECH

Sitech, External Valve port with flange

60810

6.34 €

External Valve port for attachment to neoprene drysuits. Valve ports with elevated rear flange are designed to be attached in a hole that is just a little smaller than the flange and the neoprene is to be glued onto the flange. TECHNICAL SPECIFICATION Neoprene rubber Outer diameter: 100 mm Inner diameter: 33 mm Dual groove Elevated rear flange Fits all...

En Stock

Available

SI TECH

Sitech, Inner Glove, Kleven

9.38 €

Kleven Inner glove is a thin and flexible inner glove with very good thermal capability. Knitted with polyester hollow fiber (97 %) and spandex (3 %). Advanced materials and deliberate design ensures the best heat insulation and a faster drying time than comparable materials. Short cuff. Tight around the wrist (low risk of getting stuck in locking...

En Stock

Available

SI TECH

Sitech, Internal Valve Port

60852-cut

3.23 €

Internal valve port used in the installation of Sitech valves.

En Stock

Available

SI TECH

Sitech, ORUST neck ring

60174

29.15 €

Neck Ring for the ORUST Neck system.

En Stock

Available

SI TECH

Sitech, ORUST Neck System

71.28 €

ORUST Neck System is the third generation of Neck System. An even softer and more flexible Modular Quick Change Solution for the neck! The design provides superb comfort and can be mounted in a great range of garments. Available in black silicone, S and standard size NOTE: Do you need the Blu seal or a latex collar in a specific size? Contact us and...

En Stock

Available

SI TECH

Sitech® LIANA

60780

147.93 €

LIANA is a user friendly and versatile squeeze-on Dry Glove system. SLÄGGÖ Flex Ring works as attachment platform for LIANA. Don by squeezing. Doff by turning the release ring with one hand. Benefits User friendly Self supported Accomodating most hands Sturdy construction.

En Stock

-23%

Available

SI TECH

Sitech® OBERON

60770

95.48 € 124.00 €

OBERON is a round Dry Glove System that connects with the PU-Ring of SLÄGGÖ Flex Ring. OBERON is an easy to use Dry Glove System, designed to perform - no matter the diving environment. OBERON Dry Glove System is a bayonet system that is easy to lock and release. The kit includes the complete set for both sleeves NOTE: gloves are not included

En Stock

Available

pee-valve, condoms, quick connec

Skinister medical adhesive

43.88 €

Skinister Medical Adhesive Spray is skin safe glue designed to adhere silicone prosthetics. Designed for medical uses, visual effects, and cosplay costumes. Description 60 ml or 120 ml pump spray Plastic bottle Safety data sheet Medical Grade Prosthetic Adhesive Spray How to apply Skinister adhesive Prepare your skin by washing with soap and water...

En Stock

Available

pee-valve, condoms, quick connec

Skinister medical adhesive remover

31.95 €

Skinister Prosthetic Medical Adhesive Remover is formulated to remove Skinister Medical Adhesive. This medical-grade solvent is odor-free, non-skin irritating and non-sensitizing. It’s commonly used to aid in the removal of mastectomy breast forms, ostomy appliances and cosmetic prosthetics from the skin. 60ml bottle. Description 60 ml pump spray or 120...

En Stock

Available

SI TECH

SLÄGGÖ Flex Ring

77.36 €

SLÄGGÖ Flex Ring is a flexible Modular Quick Change Solution. The design provides superb comfort and is able to be mounted in a great range of garments. The system has a circular shape, so there is no need of indexation/orientation during installation

Fuera de Stock

Ask us about availability

DRYGLOVE

sleeve inner ring spare part

Dry-Glove-Spare-2

4.95 €

Fuera de Stock

Ask us about availability

DRYGLOVE

sleeve outer ring spare part

Dry-Glove-Spare-3

6.95 €

En Stock

Available

Spare parts

Slide Tri Glide

SFSTG

4.13 €

Slide tri glide for 50mm webbing.It can be use for different applies, one of them and the most demanding is mounting it on the back of the back plate, making the cinch able to run over it and making the harness infinitely adjustable.

En Stock

Available

Accessories

Sliding D-Ring 50mm

DR50SLIDE

6.61 €

This D-Ring allows us to use it as a retainer for a classic D-Ring allowing us to move its position up and down, see attached photo as an example.

Fuera de Stock

Ask us about availability

inicio

SMACO bag for S500 Tank

SMC-BAG-S500

14.88 €

Fuera de Stock

Ask us about availability

inicio

SMACO DIN filling hose

SMC-TRM-0001

58.68 €

Filling hose for Smaco cylinders with DIN connection. Specific connections for Smaco systems

Fuera de Stock

Ask us about availability

inicio

SMACO DIN filling hose with SPG

SMC-TRD-0001

85.12 €

Filling hose for Smaco cylinders with DIN connection and Pressure gauge inlcuded. Specific connections for Smaco systems

Fuera de Stock

Ask us about availability

inicio

Smaco Electric Air Pump 200 Bar (3000 PSI)

SMC-COM-0001

409.92 €

This 1800W, 220v electric compressor is specifically designed for filling Smaco breathing system cylinders. With a filling capacity of 200Bar (3000 PSI) and a small size and weight (17kg), it is ideal to carry it and store anywhere. The approximate charging time for a 0.5l tank is about 8 minutes. Supplied with all the necessary adapters for filling Smaco...

Showing 3781-3816 of 4137 item(s)