DIVE GEAR

LIGHTING

Photo and Video

JACKETS

REGULATORS

BACKPLATES/WINGS

SUITS

Sidemount/Caving

Adjustable Fins

Foot Pocket Fins

MASK

COMPUTERS

REGULATOR HOSE (Rubber & Miflex)

CONTROL INSTRUMENTS

STEEL HARDWARE

DECO ESSENTIALS

REELS, WETNOTES, BUOYS...

Knifes & Cutters

BUNGEE MOUNTS/COMPASS

Sealing systems

DRYSUIT INFLATOR SYSTEMS

TANKS/VALVES

pee-valve, condoms, quick connec

Gas fills, analysis & decanting

ANALYZERS

ADAPTERS

Transport bags

Hygiene and Care

Weight

Tools

Face Mask

Miscellaneous

Compressors

Pre Owned

Scooters

Outlet

Lifting Balloons

En Stock

Available

Lola Valves

Lola Manifold Service Kit 300Bar

T-SP service kit-300

14.80 €

En Stock

Available

Lola Valves

Lola Manifold T-SP 300Bar

Valve connector T-SP 300bar

147.04 €

Connection DIN G5/8" 230Bar direct to valve The manifold does not have an insulating valve because you already have one in each side valve, in this way we are able to isolate and eliminate even more failures, such as those of the manifold O-Rings. It is also more robust than conventional manifols. Even more, this manifold allows the twins to be assembled...

En Stock

Available

Lola Valves

Lola Nitrox Valves Service Kit

V set II-Nitrox

32.00 €

Service Kit for Lola Nitrox T-SV and T-SVO valves

En Stock

Available

Gas fills, analysis & decanting

Lola PTH 300

PTH 300

140.45 €

When filling twin sets and SCR devices with TMX or NITROX mixtures, different concentrations of the mixture occur in individual bottles. This can be avoided by filling each bottle separately or by using the PTH 300 hose. After closing the connecting bridge, fill both bottles at the same time. As a result, both bottles are guaranteed to have the same...

En Stock

Available

inicio

Lola QHK Tank holder

QHB Holder

45.69 €

Tank holder for use on the Lola Tank holder kit

En Stock

Available

TANKS & MORE...

Lola QHK Tank Holder Kit

159.90 €

The Lola tank holder kit is robust, safe and quick and easy to use. The ball and push button locking system makes opening and closing easy while keeping the system fixed without uncomfortable rattling. The profile of the support is only 13mm, making the tank (or whatever you fixed in...) fit very tightly to the base where we anchor the support. It is...

En Stock

Lola Valves

Lola T-SV 300 Air right valve

T-SV 300 R

139.67 €

Really robust valve with a design studied to facilitate handling in any environment, no matter how narrow or difficult, significantly increasing the user's speed of action and consequently general safety. It has two outlets, each activated by its own shut-off valve, in this way double outlets can be mounted on single cylinders, twin sets, supports for...

En Stock

Available

Lola Valves

Lola Valve Hand Wheel KV

20.97 €

Valve Hand Wheel for Lola Valves. NOTE: the vale is not included.

En Stock

Available

Lola Valves

Lola Valve Seat

Seat TKV

12.73 €

Seta for Valves T-SV and T-SVO

En Stock

Available

Lola Valves

Lola Valve Shaft

Valve Shaft

15.77 €

Lola Valve Shaft

En Stock

Available

Lola Valves

Lola Valves Service Kit

V set II-Air

25.74 €

Service Kit for Lola T-SV and T-SVO valves for use with Aire, trimix and Nitrox up to 40%

En Stock

Available

Lola Valves

Lola ZV Blind-End Plug G5/8" (DIN) 200Bar

ZV 200

20.25 €

Blind-end plug with pressure release screw

En Stock

Available

Lola Valves

Lola ZV-T G5/8" 300 Bar DIN Plug

ZV-T 300

24.79 €

The ZV-T plug protects the valve from contamination and from gas leakage from the bottle during transport. To release the gas and unscrew the plug, you just turn the rotary wheel (there is no need of key). The plug can be easily unscrewed even when under pressure. You just screw in the plug (we recommend to briefly open and close the valve). We also offer...

En Stock

Available

Tools

Medium pressure gauge

ins-mid-0001

20.80 €

Pressure gauge to adjust the intermediate pressure of the first stages

En Stock

Available

CONTROL INSTRUMENTS

Metalsub Nitrox Pressure gauge with hose

INS-MAN-0003

49.58 €

Metalsub Oxygen compatible Pressure gauge with 80cm hose and protector.Chromed brass body and highly resistant plastic glass.

En Stock

-12%

Available

CONTROL INSTRUMENTS

Metalsub Pressure gauge with hose

INS-MAN-0001

50.39 € 57.26 €

Metalsub Pressure gauge with 80cm hose and protector.Chromed brass body and highly resistant plastic glass.

En Stock

-10%

Available

CONTROL INSTRUMENTS

Metalsub TECH Gauge Tempered Glass.

INS-MAN-0100

48.79 € 54.21 €

This pressure gauge is intendeed-ideal for stage tanks, thanks its small size is perfect for this use. It has been reinforced at the front part with an extra metal cover and a highly resistant Tempered glass. This pressure gauge will resits the hardest use we can give it.

En Stock

Available

CONTROL INSTRUMENTS

Mini gauge Metalsub

INS-MIN-0001

19.00 €

Metalsub Pony Gauge with BAR and PSI scale, designed to be installed directly in the first stage, it has a 7/16 UNF thread, the standard pressure gauge thread.

En Stock

Available

SPARE PARTS & EXTRAS

Neck Tank M25 O-Ring

0.83 €

Tank neck O-Ring available in two options: Option 1: standard Option 2: Viton O2 compatible

En Stock

Available

Service kits and O-Rings

O-Ring for 3/8" hose

JNT-NBR-0003-pack

1.24 €

4 O-Rings for the 3/8 "terminal of the low / medium pressure hose (the O-Ring that goes into the terminal of the regulator and inflator hoses that enters the 1st stage)

En Stock

Available

Service kits and O-Rings

O-Ring for 3/8" hose 20 units

JNT-NBR-0003

3.30 €

20 units of O-Rings for the 3/8 "terminal of the low / medium pressure hose (the O-Ring that goes into the terminal of the regulator and inflator hoses that enters the 1st stage)

En Stock

Available

Service kits and O-Rings

O-Ring for 9/16" hose

JNT-NBR-0004-pack

1.24 €

4 O-Rings for the 9/16" terminal of the regulator hose (the O-Ring that goes into the terminal of the regulator hose that enters the 2nd stage) 4 units

En Stock

Available

Service kits and O-Rings

O-Ring for HP hose (7/16")

JNT-NBR-0005-pack

1.60 €

4 O-Rings for the 7/16" terminal of the HP hose (the O-Rings that goes into the high pressure hose terminal that enters the 1st stage) 4 units

En Stock

Available

Service kits and O-Rings

O-Ring for HP hose (7/16") 20 units

JNT-NBR-0005

6.60 €

20 units of O-Rings for the 7/16" terminal of the HP hose (the O-Rings that goes into the high pressure hose terminal that enters the 1st stage)

Showing 25-48 of 113 item(s)

Product added to wishlist