DIVE GEAR

LIGHTING

Photo and Video

JACKETS

REGULATORS

BACKPLATES/WINGS

SUITS

Sidemount/Caving

Adjustable Fins

Foot Pocket Fins

MASK

COMPUTERS

REGULATOR HOSE (Rubber & Miflex)

CONTROL INSTRUMENTS

STEEL HARDWARE

DECO ESSENTIALS

REELS, WETNOTES, BUOYS...

Knifes & Cutters

BUNGEE MOUNTS/COMPASS

Sealing systems

DRYSUIT INFLATOR SYSTEMS

TANKS/VALVES

pee-valve, condoms, quick connec

Gas fills, analysis & decanting

ANALYZERS

ADAPTERS

Transport bags

Hygiene and Care

Weight

Tools

Face Mask

Miscellaneous

Compressors

Pre Owned

Scooters

Outlet

Lifting Balloons

En Stock

available

CONTROL INSTRUMENTS

Apeks Bungee Mount Compass

NS127111

65.29 €

The Apeks Bungee Compass is a wrist mounted compass. An elasticated strap will hold it securely in place even when your wetsuit or drysuit compresses at depth.

En Stock

Available

Spare parts and kits

Apeks Compensation Chamber inner parts

3.60 €

Internal parts of the Apeks 1st satges Ambient Pressure Compensation Chamber The parts are: Spring, Spring Seat and Valve Lifter Choose the necessary part(s) from the drop-down menu following the relationship described below: 1: Spring for all Apeks 1st stages except Flight 2: Spring for Flight 1st stage 3: Spring seat for all Apeks 1st stages except...

En Stock

Available

Apeks wings Spare parts

Apeks corrugated hose

32.95 €

Apeks Corrugated Hose Corrugated hose for Apeks Wings. Available in two lengths: 42cm (16") 47cm (18")

Fuera de Stock

Product available with different options

Spare parts and kits

Apeks Cover Exhaust Valve for At and ATX 2nd stage

4.00 €

View

En Stock

Available

Spare parts and kits

Apeks Diaphragm Clamp Chrome...

RG912303

26.94 €

Apeks Diaphragm Cap, to use with these 1st stages: XTX200 TEK3 XTX100

En Stock

Available

Spare parts and kits

Apeks DIN 300Bar or M26 connection screw.

41.00 €

Apeks DIN 300Bar or M26 connection screw. DIN 300Bar connections are available in three options: Option 1: Glossy finish Option 2: Matte finish Option 3: Rubberized finish Option 4: Glossy finish, 100 % metal (the one with rubber green-yelllow is not longer available) Option 5: Matte finish MTX model Option 4 corresponds to the M26 connection for Nirox...

En Stock

Spare parts and kits

Apeks DIN M26 O-Ring

RG912179

1.36 €

O-ring for M26 connection of Apeks 1st stages. O2 Clean It can be used in first stage DIN M26 connections from other brands, for this it is recommended to check measurement compatibility. Dimensions: Outside diameter 19mm Section: 2,5mmø

En Stock

Available

Spare parts and kits

Apeks Din Protector Cap

RA117141

9.92 €

El tapón Apeks para los reguladores de conexión DIN cuenta con un asiento donde alojar una junta tórica de recambio (incluida con la compra del tapón). Es una ingeniosa solución, ya que de esta maneras llevaremos siempre la junta con nosotros hasta el último momento, no dejaremos de bucear nunca por haber perdido la junta del DIN en el último momento...

En Stock

Available

inflation and exhaust valves

Apeks Dry Suit Cuff Dump

TL112111

22.00 €

The Apeks Cuff Vent Valve is totally free from maintenance and requires no adjustment. Designed to fit in the suit cuff it allows air to be vented from the suit by simply raising the arm. Its compact size makes it suitable for mounting in the sleeve without interfering with our ability to work. Dimensions: 44mm diameter x 22mm thickness

En Stock

Available

inflation and exhaust valves

Apeks Drysuit Deflators spare parts

5.00 €

Spare parts for maintenance of Apeks drysuit deflator valve. Item #1: Valve seat Item #2: One-way valve (mushroom) Choose the appropriate part(s) from the drop-down menu according to the description in the list above. NOTE: Make sure you choose the correct spare parts, this product is NON-REFUNDABLE

En Stock

Available

inflation and exhaust valves

Apeks Drysuit inflator vale spare parts

AP-V-KIT

4.93 €

Apeks Valve Dry Suits Service kit. The kit consists of 1 unit of O-Ring #1 1 unit of O-Ring #2 2 units of O-Ring #3 NOTE: Make sure you choose the correct spare parts, this product is NON-REFUNDABLE

En Stock

Available

Spare parts and kits

Apeks DST 5th port

ra117113

36.00 €

An upgrade kit with the DST (XTX50) First stage of Apeks can be extended by a further means pressure outlet. This is then located on top of the rotary distributor block, allowing an even better hose configuration. In this kit, all seals, as well as an illustrated manual (English) are included.

En Stock

Available

inicio

Apeks DST Turret retain bolt

RG912307

12.85 €

Fuera de Stock

Product available with different options

Apeks wings Spare parts

Apeks elbow with dump valve

3.45 €

Spare parts for Apeks elbow with bleed for Apeks WTX and PSD wings.Choose the necessary part from the drop-down menu according to the numbering marked in the drawing 1: Elbow fixing ring 2: Elbow body 3: Purge mechanism seat 4: Purge mechanism body 5: Purge mechanism spring 6: Purge mechanism outer seat 7: Cable anchoring clip 8: Teflon coated 42cm steel...

View

En Stock

Available

Spare parts and kits

Apeks environmental decal

RG912347

0.93 €

En Stock

Available

Spare parts and kits

Apeks Environmental End Cap for several models

RG912068

15.00 €

Apeks 1st stage Environmental End Cap to use with: TEK3 FSR (XTX200) DST (XTX50) DS4

En Stock

-18.2%

Available

Complete regulator set

Apeks EVX 200 Stage3

742.97 € 908.26 €

After years of leading the market with its flagship model XTX200, Apeks has reinvented itself and presents us with what will be the replacement for its number one, the new Apeks EVX 200 The Apeks EVX 200 redefines excellence in every sense, design, precision and performance. It is without a doubt the evolution of the most advanced regulator technology,...

En Stock

-30%

Available

inflation and exhaust valves

Apeks exhaust valve hight profile

TL111115

57.27 € 81.82 €

The Automatic Dump Valve has all the features of our Low Profile version but without the obvious benefits of the low, ergonomic design.

En Stock

-15.8%

Apeks Jackets

Apeks Exotec Grey

660.38 € 784.30 €

The new Apeks Exotec wing jacket is the evolution of the well-known and appreciated Apekx Black Ice. Notable improvements have been incorporated in several points of the equipment that make it, even if possible, even more comfortable and functional. NOTE: The Gray model does not have details in orange, the details are all in grey. The images with the...

En Stock

Available

Apeks wings Spare parts

Apeks Exotec weight pocket replacement

50.00 €

Surelock II interior weight pocket for Apeks Exotec jacket, 10 lb. Interior weight storage.

En Stock

Available

Spare parts and kits

Apeks Filter cone 1st stage (10 units pack)

RG912779

22.00 €

Valve (HP piston) suitable for all 1st stages Apeks

En Stock

-22.35%

Adjustable Fins

Apeks Fins RK3 White

114.88 € 147.93 €

Designed in collaboration with the US military and renowned for outstanding performance and reliability, the Apeks RK3 is a rugged thermoplastic rubber fin featuring an over-sized foot pocket to accommodate drysuit boots and a spring strap for easy donning and doffing. The RK3 is available in three sizes: Medium, Large and Super. NOTE: The downloadable...

En Stock

-22.35%

Adjustable Fins

Apeks Fins RK3 Yellow

114.88 € 147.93 €

En Stock

Available

Spare parts and kits

Apeks Flight 1st stage Diaphragm

RG912117

3.36 €

This is the Apeks 1st stage diaphragm for Flight 1st stage

Showing 49-72 of 4577 item(s)

Product added to wishlist