DIVE GEAR

LIGHTING

Photo and Video

JACKETS

REGULATORS

BACKPLATES/WINGS

SUITS

Sidemount/Caving

Adjustable Fins

Foot Pocket Fins

MASK

COMPUTERS

REGULATOR HOSE (Rubber & Miflex)

CONTROL INSTRUMENTS

STEEL HARDWARE

DECO ESSENTIALS

REELS, WETNOTES, BUOYS...

Knifes & Cutters

BUNGEE MOUNTS/COMPASS

Sealing systems

DRYSUIT INFLATOR SYSTEMS

TANKS/VALVES

pee-valve, condoms, quick connec

Gas fills, analysis & decanting

ANALYZERS

ADAPTERS

Transport bags

Hygiene and Care

Weight

Tools

Face Mask

Miscellaneous

Compressors

Pre Owned

Scooters

Outlet

Lifting Balloons

En Stock

available

SPARE PARTS & EXTRAS

Sparepart Set (for all valves and manifolds)

A16310640

26.00 €

Complete Kit to carry out the revision and tuning of the BtS, Scubapro and many other valves and manifolds. Ask us for any questions about compatibility with your valve type. NOTE: the O-ring can be green or black, in both cases compatible with O2 using specific grease.

En Stock

Available

STEEL HARDWARE

stainless-steel belt buckle

A21910601

9.00 €

En Stock

Available

Spare, Accessories

SUEWX Video support with elastic band

71258

90.75 €

Action-CAM holder, safe and durable. Can also accommodate larger cameras. Compatible with all DPV models, very easy to install without tools. The standard ¼” screw, floats and special holders for underwater lamps or illuminators are supplied. The inner surface of the strap is coated with non-slip material.

En Stock

Available

Spare, Accessories

SUEX Carryng strap VR new series

73007

65.00 €

The Suex Carry Strap is an additional carrying handle made of semi-rigid tape, equipped with elastic rings for securing the bolt snap of the tow leash. It features an adjustable stainless steel strap, allowing it to be firmly secured to the body of the scooter.

En Stock

Available

Spare, Accessories

Suex Cover for VRX, VRT

71850

87.12 €

Elastic cover to be placed on the DPV body to protect the surface during transport

En Stock

Available

Spare, Accessories

Suex Cover for XJS, XJT

71846

78.65 €

Elastic cover to be placed on the DPV body to protect the surface during transport

En Stock

Available

Spare, Accessories

Suex Cover for XK

71847

78.65 €

Elastic cover to be placed on the DPV body to protect the surface during transport

En Stock

Available

Spare, Accessories

SUEX Smart Lock Tow Rope without Carabiners

72499

83.50 €

SMART LOCK is the brand-new “tow cord” designed by SUEX to make your underwater navigation experience easier and safer. This special tow cord fits any type of DPV. Equipped with a simple bolt snap, this innovative mechanism allows for quick, simple, and effective adjustment of the towing line length even when wearing thick gloves or drysuits. The material...

En Stock

Available

Spare, Accessories

SUEX soporte de transporte

70606

127.05 €

Support designed to keep the scooter in a horizontal position during transport, in the car, boat, etc., allowing for secure anchoring and preventing rotation. A fabric strap with Velcro allows for quick positioning.

En Stock

Available

Spare, Accessories

Suex standard harness

70221

59.29 €

Harness for towing the diver while using the DPV, compatible with all models. Essential for divers who do not have a GAV with a front tow ring. The towing force is thus applied to the diver’s body and not to the arms. Fully adjustable, fits all sizes.

En Stock

Available

Spare, Accessories

Suex Tow line with Bolt Snap

70547

30.25 €

Kit contains bolt snap, leash and elastic. The bolt snap and leash must be correctly attached to the scooter to allow for quick adjustment of the length. The elastic is essential for holding the top of the scooter during transport.

En Stock

Available

Spare, Accessories

SUEX VR Buddy Main O-Ring

72586

14.52 €

VR Models Main Body O-Ring 6,7mmø x 180mm

Fuera de Stock

Ask us about availability

COMPLEMENTS

Tank Boot

13.00 €

Tank Boot, available in three sizes: Item nº 1: for 140mm tanks (5, 7 and 8.5 liters) Item nº 2: for 171mm tanks (8, 10 and 12 liters long) Item nº 3: for 204mm tanks (12 liter short, 15, 18 and 20 liters) Choose the appropriate one from the dropdown menu NOTE: The tank boot may vary slightly from the picture, this is shown for illustrative purposes only.

En Stock

-10%

Available

valves

Twin tank valves with isolation 232Bar

204.30 € 227.00 €

Oxygen Clean G5/8" 232Bar twin tank valves with isolation. Available for: 5 and 7 liters (140mm) 7liters wide and 8, 10, 12liters long (171mm) 12, 15, 18 and 20 liters (204mm) 11,1 liters aluminium, S080 (186mm)

Fuera de Stock

-12%

Ask us about availability

COMPLEMENTS

V-weight Coated

34.32 € 39.00 €

V-weight coated with resin to prevent the inevitable wear of the lead piece from contaminating the environment. The resin cover is hard and highly resistant, it is completely attached to the lead piece, thus avoiding premature wear and breakage. These V-weight leads are designed to be mounted on twin tanksright between the backplate and the tanks,...

En Stock

Available

SPARE PARTS & EXTRAS

Valve knob short

A16310623-short

7.99 €

39mm long knob, slightly shorter than standard ones

Fuera de Stock

Ask us about availability

DRYSUIT INFLATOR SYSTEMS

1st stage with 4 LP connections

A13110601

140.00 €

Unbalanced 1st Stage, DIN, 300 bar; G5/8" thread, 300 bar, 1 HP port and 4 LP ports

Fuera de Stock

Ask us about availability

TWIN TANKS

8,5 twin tanks concave base

906.00 €

Fuera de Stock

Ask us about availability

TWIN TANKS

Black Edition 2x12 concave twin tanks

S16716661

943.00 €

The range of steel cylinders is produced by Eurocylinders System AG (ECS).ECS is one of the biggest and most efficient manufacturers of high pressure steel cylinders in Europe with an annual output of more than 500,000 cylinders.

Fuera de Stock

On demand

DRYSUIT INFLATOR SYSTEMS

Complete drysuit inflation system W21,8

282.99 €

COMPLETE DRY SUIT INFLATION SYSTEMS, ALU OR STEEL CYLINDERS - 0,85 TO 3 LITRES. Drysuit Inflation Systems developed by BtS consisting of a Cylinder (aluminium or steel), Cylinder Valve (W21,8 inert gas), First Stage, and Cylinder Mounting Straps.

En Stock

Available

valves

Comptec Valves

78.00 €

Comptec type valves 5 different valves for the different models of dry suit inflation system tanks. Inert Gas valve for tanks with M18/1.5 neck Inert Gas valve for tanks with M25x2 neck 5/8 GAS valve (DIN 232Bar) for tanks with M18/1.5 neck and M25x2 neck 5/8 GAS valve (DIN 232Bar) for tanks with M25x2 neck 5/8 GAS valve (DIN 300Bar) for tanks with...

Fuera de Stock

Ask us about availability

CONTROL INSTRUMENTS

Cylinder pressure testing gauge, DIN, up to 300 bar

A16910604

95.00 €

Surface pressure gauge for checking tnaks pressure. Able up to 400Bar, connection DIN 300Bar

Fuera de Stock

DIN Valve RIGHT expandable US NPSM 3/4 "

Ask us about availability

valves

DIN Valve RIGHT expandable US NPSM 3/4 "

A16310631

78.00 €

Regulator connection: 232Bar DIN Neck connection: US NPSM 3/4" GAS Orientation: Right Blind Plug not included. Do you need the blind plug? click here

Fuera de Stock

Ask us about availability

ADAPTERS

G 5/8" 230 bar Female to INT

A13910601

50.00 €

Adapter DIN to INT. Ideal to use the regulator with DIN system in bottles with non-removable fixed INT

Showing 49-72 of 150 item(s)

Product added to wishlist