DIVE GEAR

LIGHTING

Photo and Video

JACKETS

REGULATORS

BACKPLATES/WINGS

SUITS

Sidemount/Caving

Adjustable Fins

Foot Pocket Fins

MASK

COMPUTERS

REGULATOR HOSE (Rubber & Miflex)

CONTROL INSTRUMENTS

STEEL HARDWARE

DECO ESSENTIALS

REELS, WETNOTES, BUOYS...

Knifes & Cutters

BUNGEE MOUNTS/COMPASS

Sealing systems

DRYSUIT INFLATOR SYSTEMS

TANKS/VALVES

pee-valve, condoms, quick connec

Gas fills, analysis & decanting

ANALYZERS

ADAPTERS

Transport bags

Hygiene and Care

Weight

Tools

Face Mask

Miscellaneous

Compressors

Pre Owned

Scooters

Outlet

Lifting Balloons

En Stock

Available

Dry Suit Bags-Hangers

SANTI Stay Dry Bag Black-Grey

SA1088

119.83 €

Travel bag. Perfect not only for dry suit. Composition: 100% PVC Dimensions: 71 x 39 x 39 cm, capacity 109 liters Colour: gray with silver prints The outer pocket for personal data Inside a large zippered pocket 2 handles on both sides of the bag 4 welts on the front and back of the bag 2 straps for carrying the bag on the shoulder or on the back 2 soft...

En Stock

Available

Dry Suit Bags-Hangers

SANTI Under Suit Bag

SA1080

46.28 €

The SANTI bag, specifically designed to store drysuit underwear, has been made with mesh on the sides to allow clothing to air out and wick away the moisture that inevitably builds up during diving. Another perfectly designed accessory

En Stock

Available

SPARE PARTS & EXTRAS

Seat tank valve assembly

5.49 €

Depending on the type / brand / manufacturer of the tank valve, it will be needed one of the 4 shown in the photo. Choose the appropriate one for your tank valve from the drop-down menu.

En Stock

Available

Service kits and O-Rings

Small kit of O-Rings

jnt-kit-0001

11.30 €

A kit with the main diving O-rings that we may need at any time.It comes in a 5cm diameter can that will fit us anywhere.It has viton and standard O-Rings for: bottleneck, two-measure of DIN, for the HP hose, for the HP nipple, for the regulator hose (both terminals), a nipple for the HP gauge-hose and a schrader valve nipple for the inflator hose.

Fuera de Stock

Ask us about availability

SPARE PARTS & EXTRAS

Sparepart Set (for all valves)

14.10 €

Depending on the type / brand / manufacturer of the valve, one of the 3 shown in the photo will be needed.They are also available with classic or Viton O-rings.Choose the appropriate type and material from the drop-down menus.

En Stock

Available

SPARE PARTS & EXTRAS

Sparepart Set (for all valves) Nitrox

16.52 €

Depending on the type / brand / manufacturer of the valve, one of the 3 shown in the photo will be needed.These kits are Oxygen compatibleChoose the appropriate one from the drop-down menu.

En Stock

Available

SPARE PARTS & EXTRAS

Stem with O-ring and Teflon Packing

8.00 €

Depending on the type / brand / manufacturer of the tank valve, it will be needed one of the 2 shown in the photo. They are also available mounted with classic or Viton O-rings.Choose the appropriate type and material from the drop-down menus.

En Stock

Available

inicio

Tank Carrier Handle

ACC-BOT-0001

16.00 €

Fixed scuba tank holder handle. Ergonomic handle to prevent slipping. Fixing with 2 steel screws.

Fuera de Stock

Ask us about availability

REGULATOR ACCESORIES

Adapter 1/2" to 3/8"

ACRT-25

6.60 €

3/8" to 1/2" adaptor Female 1/2" Male 3/8" NOTE: the image may not exactly match the item

Fuera de Stock

Ask us about availability

Boat Emergency Kits

Backpack For Single Tank

ACC-BCD-0001

38.83 €

Backpack to assemble the tank quickly and simply to be able to carry out simple operations. Ideal for boats in order to be able to inspect the hull, untangle propeller lines, unscrew the anchor, etc... The body is made of ultra resistant plastic and has a harness to be able to fix and adjust it to the body and a tank holder strap to be able to firmly hold...

Fuera de Stock

Ask us about availability

Gas fills, analysis & decanting

Digital gauge Oxygen compatible

DGP-OXY-0068

168.59 €

Digital pressure gauge Oxygen compatible . Measurements: 68mm Scales: 5 Connection: G1/4"

Fuera de Stock

Ask us about availability

Gas fills, analysis & decanting

Gas equalizer with pressure gauge

105.00 €

Constructed of high pressure 5000 psi (350 bar) hose and made to equalize or fill one tank from another. Set up to equalize from the tank with highest pressure to the tank with the lowest pressure. Comes with bleeder valve to safely detach and ready to help make your scuba diving safe and fun. This model has a pressure gauge installed Is able to use with...

Fuera de Stock

Ask us about availability

Gas fills, analysis & decanting

Gas equalizer with pressure gauge for O2 use

111.57 €

Fuera de Stock

On demand, available in 48-72 hours

Boat Emergency Kits

Hookah with regulator 10m

LRS-HOK-1000

195.22 €

10 meters long Hookah with 1st and 2nd stage (full regulator) to carry out shallow emergency repairs, either on our boat or on the port pontoons. Perfect for untangling nets or lines from our propeller, undoing anchors, recovering fallen objects, etc...

Fuera de Stock

On demand, available in 48-72 hours

Boat Emergency Kits

Hookah with regulator 20m

LRS-HOK-2000

251.55 €

20meters long Hookah with 1st and 2nd stage (full regulator) to carry out shallow emergency repairs, either on our boat or on the port pontoons. Perfect for untangling nets or lines from our propeller, undoing anchors, recovering fallen objects, etc...

Fuera de Stock

On demand, available in 48-72 hours

Boat Emergency Kits

Hookah with regulator 5m

LRS-HOK-0500

168.75 €

5 meters long Hookah with 1st and 2nd stage (full regulator) to carry out shallow emergency repairs, either on our boat or on the port pontoons. Perfect for untangling nets or lines from our propeller, undoing anchors, recovering fallen objects, etc...

Fuera de Stock

Ask us about availability

Pressure Gauge

Metalsub Nitrox pressure gauge 50mm

ins-spr-0010

32.96 €

Pressure gauge Oxygen compatible capsule for stage tanks, thanks its small size is perfect for this use. Chromed brass body and highly resistant plastic glass. It is also the replacement for the pressure gauges mounted with a protector from Metalsub, Cressi, etc ...

Fuera de Stock

Ask us about availability

ADAPTERS

Oxygen Adapter NEVOC W30x2 300 Bar

US-1134

72.00 €

Adapter for 300Bar Oxygen tanks, whose valve is specific of the Nevoc W30x2 typeThis adapter has the a NEVOC W30x2 type 32 and G1 / 4 male connection to connect to different adapters.As a general rule, it´s needed this other part (the below link) to completely convert to a standard DIN connection. Link to Adapter G1 / 4 female to DIN 300 Bar

Fuera de Stock

Ask us about availability

Pressure Gauge

Pacific 2 elements console Black

INS-CON-3004

95.04 €

Double console with pressure gauge and depth gauge. Measuring elements encapsulated in protectors. 80cm hose included.

Fuera de Stock

Ask us about availability

Pressure Gauge

Pacific 2 elements console Yellow

INS-CON-3006

95.04 €

Double console with pressure gauge and depth gauge. Measuring elements encapsulated in protectors. 80cm hose included.

Fuera de Stock

Ask us about availability

Service kits and O-Rings

Pack of 20 O-Rings 9/16"

JNT-NBR-0004

3.90 €

20 units of O-Rings for the 9/16" terminal of the regulator hose (the O-Ring that goes into the terminal of the regulator hose that enters the 2nd stage)

Fuera de Stock

Ask us about availability

Gas fills, analysis & decanting

Prolonger hose

77.00 €

We have a DIN extension hose to facilitate the test of your regulator. Keep the vertical bottle while you submerge the equipment in a container with comfort. We have version DIN 200 and DIN 300 in measure standard of 2 meters (6.5 ft), but we can supply the measure you need.

Fuera de Stock

Ask us about availability

ALU.TANKS

S080 Metalsub Aluminium Tank

TNK-S80-0001

280.00 €

S080 aluminium tank manufactured Characteristics: Height 660mm Diameter: 186mm Working pressure: 207 Bar Hydrostatic test pressure: 310,5 Bar Neck thread: M25x2 Wall thickness: 12.64mm Weight: 14,37kg Volume: 11.1l Use temperature: -30º to 60º Working pressure at 60º: 248 Bar

Fuera de Stock

Ask us about availability

Valves and cables...

SANTI "Y" Connector

SA6035

61.98 €

SANTI “Y” connector consists of three waterproof two pole connectors in a single device that allows for power split from one source to two separate devices. The “Y” connector can be used for all type of underwater electrical devices, like heating or lightning systems with E/O cords connectors. The Y connector is compatible with all types of E/O cords...

Showing 49-72 of 126 item(s)

Product added to wishlist