DIVE GEAR

LIGHTING

Photo and Video

JACKETS

REGULATORS

BACKPLATES/WINGS

SUITS

Sidemount/Caving

Adjustable Fins

Foot Pocket Fins

MASK

COMPUTERS

REGULATOR HOSE (Rubber & Miflex)

CONTROL INSTRUMENTS

STEEL HARDWARE

DECO ESSENTIALS

REELS, WETNOTES, BUOYS...

Knifes & Cutters

BUNGEE MOUNTS/COMPASS

Sealing systems

DRYSUIT INFLATOR SYSTEMS

TANKS/VALVES

pee-valve, condoms, quick connec

Gas fills, analysis & decanting

ANALYZERS

ADAPTERS

Transport bags

Hygiene and Care

Weight

Tools

Face Mask

Miscellaneous

Compressors

Pre Owned

Scooters

Outlet

Lifting Balloons

En Stock

Available

SI TECH

Sitech Slide inflation valve

56.11 €

The Slide Inflation Valve is a high performance valve suitable for all areas of recreational and technical diving. The design of the housing makes it easy to locate and the slide button ables the diver to inflate a smooth flow of gas and fully control the buoyancy. The construction of the filter lid makes the Slide Inflation Valve suitable to use in...

En Stock

Spare parts

Sitech String Dump Valve

13350WN

31.84 €

Spring loaded Dump Valve with twin check valves and cord. Intended for use in inflatable units such as rebreathers, lift bags, BCD´s etc. Double check valves reduce water intrusion to a minimum. A moving pressure plate prevents the check valve from tacking to the spring retainer when dumping manually.This Dump Valve is designed to be fitted in a Weld nut.

Fuera de Stock

Ask us about availability

inflation and exhaust valves

Sitech Thetis exhaust valve

50.78 €

En Stock

Available

pee-valve, condoms, quick connec

Sitech TRIGON, Airsoft Pee-Valve Tube

SI-11958

30.32 €

50cm connection hose (tube) for Pee-Valve relief valves. This is a new, more flexible version with the added benefit of being able to be routed around bends, making it very difficult to pinch. Of course, also works with any other valve whose diameter matches +/- the inside of this tube Outer diameter: 12mm Inner diameter: 7.5mm

En Stock

pee-valve, condoms, quick connec

Sitech TRIGON, Pee-Valve Tube

SI-11951

19.18 €

50cm connection hose (tube) for Pee-Valve

En Stock

Available

inflation and exhaust valves

Sitech Valve Attachment Tool (1 unit)

SI-18222

10.00 €

Valve Attachment Tools are recommended to enhance the grip when detaching and/or reattaching SI TECH valves and Blanking plug. Note! Sold in pcs, not a pair. Two pcs are needed for most valves.

En Stock

Available

SI TECH

Sitech Weld nut

11032

6.34 €

This Weld nut is intended for welded attachment of valves. The Weld nut demands an O-ring for proper sealing properties. (O-ring item no: 80088 included.) TECHNICAL SPECIFICATION PU Outer diameter: 64 mm Inner thread: M33 x 1,5 Fits all SI TECH valves Note: the color could be black or translucent white. The two sides of the port are shown, the price...

En Stock

Available

SI TECH

Sitech, Anti-friction washer

11016

2.44 €

Anti-friction washer for Inflation and Exhaust Valves. TECHNICAL SPECIFICATION Outer diameter: 64 mm Inner diameter: 33,5 cm For all Inflation and Exhaust Valves

En Stock

Available

SI TECH

Sitech, external rubber valve port

60805

9.12 €

External Valve port for attachment to trilaminate- and rubber drysuits. TECHNICAL SPECIFICATION Neoprene rubber Outer diameter: 100 mm Inner diameter: 33 mm Dual groove Fits all SI TECH valves NOTA: La imagen muestra las dos caras del asiento, el precio mostrado corresponde a un asiento.

En Stock

Available

SI TECH

Sitech, external valve port 75mmø

60885

6.02 €

This Valve port can either be glued or welded to trilaminate drysuits. TECHNICAL SPECIFICATION Polyurethane Outer diameter: 75 mm Inner diameter: 33 mm Dual groove Fits all SI TECH valves

En Stock

Available

inflation and exhaust valves

Sitech, external valve port 85mmø

60895

5.21 €

This Valve port can either be glued or welded to trilaminate drysuits. TECHNICAL SPECIFICATION Polyurethane Outer diameter: 85 mm Inner diameter: 33 mm Dual groove Fits all SI TECH valves

En Stock

Available

SI TECH

Sitech, External Valve port with flange

60810

6.34 €

External Valve port for attachment to neoprene drysuits. Valve ports with elevated rear flange are designed to be attached in a hole that is just a little smaller than the flange and the neoprene is to be glued onto the flange. TECHNICAL SPECIFICATION Neoprene rubber Outer diameter: 100 mm Inner diameter: 33 mm Dual groove Elevated rear flange Fits all...

En Stock

Available

SI TECH

Sitech, Inner Glove, Kleven

9.91 €

Kleven Inner glove is a thin and flexible inner glove with very good thermal capability. Knitted with polyester hollow fiber (97 %) and spandex (3 %). Advanced materials and deliberate design ensures the best heat insulation and a faster drying time than comparable materials. Short cuff. Tight around the wrist (low risk of getting stuck in locking...

En Stock

Available

SI TECH

Sitech, Internal Valve Port

SI-60852-cut

3.32 €

Internal valve port used in the installation of Sitech valves.

En Stock

Available

SI TECH

Sitech, ORUST neck ring

60174

29.15 €

Neck Ring for the ORUST Neck system.

Fuera de Stock

Ask us about availability

SI TECH

Sitech, ORUST Neck System

73.43 €

ORUST Neck System is the third generation of Neck System. An even softer and more flexible Modular Quick Change Solution for the neck! The design provides superb comfort and can be mounted in a great range of garments. Available in black silicone, S and standard size NOTE: Do you need the Blu seal or a latex collar in a specific size? Contact us and...

En Stock

Available

SI TECH

Sitech® LIANA

SI-60780

147.93 €

LIANA is a user friendly and versatile squeeze-on Dry Glove system. SLÄGGÖ Flex Ring works as attachment platform for LIANA. Don by squeezing. Doff by turning the release ring with one hand. Benefits User friendly Self supported Accomodating most hands Sturdy construction.

En Stock

-23%

Available

SI TECH

Sitech® OBERON

SI-60770

98.42 € 127.82 €

OBERON is a round Dry Glove System that connects with the PU-Ring of SLÄGGÖ Flex Ring. OBERON is an easy to use Dry Glove System, designed to perform - no matter the diving environment. OBERON Dry Glove System is a bayonet system that is easy to lock and release. The kit includes the complete set for both sleeves NOTE: gloves are not included

En Stock

Available

SI TECH

SLÄGGÖ Flex Ring

58.44 €

SLÄGGÖ Flex Ring is a flexible Modular Quick Change Solution. The design provides superb comfort and is able to be mounted in a great range of garments. The system has a circular shape, so there is no need of indexation/orientation during installation

En Stock

Available

SI TECH

Spanner Ring for SITECH SLÄGGÖ

SI-60715

7.26 €

En Stock

Available

SI TECH

Virgo & Glove Lock QCP, Ring

SI-60523

7.26 €

Ring spare part. This ring is used in the dry glove systems Virgo and Glove Lock QCP

En Stock

Available

SI TECH

VIRGO & Glove Lock Spanner ring

3.80 €

These spanner rings fits with your VIRGO and Glove Lock dryglove systems. There are four different sizes of spanner rings: The Yellow one is the more thin: for thicks gloves (ref. 60535) The Blue is a bit more thick: for medium gloves (ref 60536) The Green one, a bit more thick: for medium plus gloves (ref 60537) And the Red, the thickest: for thin...

Fuera de Stock

Ask us about availability

Modular systems

copy of Si Tech Quick Neck Basic Set

SI-60191

29.00 €

The flexibility of the Quick Neck is superior in comparasion to the Neck Tite, which makes it more suited for drysuits with thin fabric designs. The benefits in comfort are obvious and the movement pattern of the user is not harmed

Fuera de Stock

Ask us about availability

Dry Suit Bags-Hangers

DUI Drysuit bag

A19213201

48.76 €

Features: Easily holds a DUI drysuit and RockBoots Heavy-duty construction Bag Only Premium Drysuit Bag Kit (bag, zipstick) Dimensions: Approx. {16 in x 20 in x 8 in}

Showing 73-96 of 110 item(s)

Product added to wishlist