DIVE GEAR

LIGHTING

Photo and Video

JACKETS

REGULATORS

BACKPLATES/WINGS

SUITS

Sidemount/Caving

Adjustable Fins

Foot Pocket Fins

MASK

COMPUTERS

REGULATOR HOSE (Rubber & Miflex)

CONTROL INSTRUMENTS

STEEL HARDWARE

DECO ESSENTIALS

REELS, WETNOTES, BUOYS...

Knifes & Cutters

BUNGEE MOUNTS/COMPASS

Sealing systems

DRYSUIT INFLATOR SYSTEMS

TANKS/VALVES

pee-valve, condoms, quick connec

Gas fills, analysis & decanting

ANALYZERS

ADAPTERS

Transport bags

Hygiene and Care

Weight

Tools

Face Mask

Miscellaneous

Compressors

Pre Owned

Scooters

Outlet

Lifting Balloons

En Stock

Available

SPARE PARTS

Fourth Element, Xerotherm Gloves

46.20 €

Cold fingers are often the first telltale signs of exposure on a long dive. The Xerotherm gloves provide excellent thermal protection as dryglove liners without being bulky, allowing for maximum dexterity.

En Stock

Available

Hoods-Gloves

Fourth Element, 3mm/5mm Cold Water hood

HOOCW7

95.00 €

Stretch neoprene ensures a comfortable fit and the glideskin face seal minimises the flow of water into the hood. Micro holes in the top vent air with minimal water ingress and the collar is designed to work with drysuits fitted with a warmneck. Sizes: XS: 48-51cm (Head circumference) S: 51-53cm M: 53-56cm L: 56-59cm XL:...

En Stock

Available

Hoods-Gloves

Fourth Element, 3mm/5mm Hood

HOO3/5

64.00 €

The 3mm and 5mm hoods have a simple minimalist design with a smooth Glideskin interior and are produced using stretch neoprene to ensure a comfortable fit. The short collar works for both dry and wet suits, and micro holes in hood vent air with minimal water ingress. Sizes: XS: 48-51cm (Head circumference) S: 51-53cm M: 53-56cm L:...

En Stock

Hoods-Gloves

Fourth Element, 7mm Hood

HOO7

85.00 €

Our 7mm hoods have a simple minimalist design with a smooth Glideskin interior and are produced using stretch neoprene to ensure a comfortable fit. The short collar works for both dry and wet suits, and micro holes in hood vent air with minimal water ingress. Sizes: XS: 48-51cm (Head circumference) S: 51-53cm M: 53-56cm L:...

En Stock

Available

Hoods-Gloves

Fourth Element, Thermocline Hood

TL2H01

66.15 €

The new lightweight Thermocline hood is perfectly suited for diving in temperate to warm waters. It is remarkably comfortable and warm as well as being very easy to don and remove. Sizes: XS: 48-51cm (Head circumference) S: 51-53cm M: 53-56cm L: 56-59cm XL: 59-61cm XXL: 61-645cm

En Stock

Drysuit underwear

Fourth Element, X-Core Men

169.00 €

Our answer to the electrically heated vest or undergarment. Utiltising the body’s own heat output and retaining it, weight for weight the X-Core is our warmest undergarment yet. Pair it with an Arctic, Halo 3D or Arctic Expedition to experience warmth without batteries or wires.

En Stock

-30%

Drysuit underwear

Fourth Element, X-Core Women

XCWV01

118.30 € 169.00 €

En Stock

-40%

Available

Gloves

Fourth KEVLAR GLOVES 5mm

41.94 € 69.90 €

Ultra Hardwearing. Perfect for exploratory diving or situations where durability is of paramount importance.

En Stock

Available

Wires and accessories

Freedom USB cable for charging and data transfer.

#8077

79.62 €

En Stock

Available

Tools

Microtool Radius

AI0681

36.51 €

Unique tool of its kind, designed in 2001 by our technicians. It allows you to disassemble and reassemble in case of emergency hoses, caps and fittings quickly. Structure: stainless steel Dimensions: 8.5×8.5 cm Spanners: 13-14-15-17 mm Allen keys: 4-5-6-8 mm

En Stock

Tools

Microtool Twin K

AI0682

26.00 €

Multi tool with different wrench size all in one. Perfect to be able to cover almost all the measures of fixed wrench that are in our diving equipment and occupy the minimum possible space. Measure: 13 × 5 cm Material: Stainless Steel Key measurements: 10-12-13-14-15-16-17 mm

En Stock

Available

ANALYZERS

Oxygen sensor Divesoft R22S

#4156

93.17 €

Oxygen sensor Divesoft type 22S with a three pin connector Molex. It is designed as a spare part for the Divesoft analyzer, but it can also be used for other apparatus. Range 0–100%. The sensor’s accuracy is ± 1% from the full scale in a constant temperature and pressure. NOTE: Sensor not suitable for rebreathers!!!

En Stock

Available

REGULATOR ACCESORIES

Tight Screw Cap DIN G5/8

#1076

9.68 €

Watertight screw cap for the primary level connector of automatics (connection DIN G 5/8").

En Stock

Available

REGULATOR ACCESORIES

Tight Screw Cap M26x2

#1529

9.68 €

Watertight screw cap for the primary level connector of automatics (connection 26).

Fuera de Stock

On demand

TANKS & MORE...

2 litters Oxygen tank M18 x 1,5

#7183

332.75 €

2L Single steel Cylinder 232 bar. Popular cylinder for the rebreather use. The cylinders were developed and manufactured specifically for Divesoft based on our requirements by Vitkovice Cylinders and the result was weight saving on each cylinder while maintaining the same strength and reliability as equivalent cylinders of other brands. Surface coating of...

Fuera de Stock

Ask us about availability

REGULATOR ACCESORIES

90º HP elbow connector

XS-HL403-90

16.00 €

Adapter elbow for HP connections. It has a 7/16 "female connection and a 7/16" male connector with nipple included

Fuera de Stock

Ask us about availability

Accessories and spare parts

Coltri DIN 232 connector for MCH 6

6-05-024

59.00 €

Filling hose terminal for Coltri compressors. DIN connection

Fuera de Stock

Ask us about availability

Diving compressors

Coltri ICON LSE 100 EM

SC100120/N

2,656.49 €

Light, but also compact? Of course. By removing weight from the electric motor and reducing the size, Icon has been able to enhance the concept of “portable”. Of course without making you give up its excellent Simplicity comes standard. Imagine having a compressor capable of great performance and endowed with extraordinary solidity. What would all this be...

Fuera de Stock

On demand

Diving compressors

Coltri Icon LSE 100SH Gasoline Portable Compressor 232 Bar

SBCO22

2,850.00 €

Model not valid for the American market, 50 Hz electric motor.The most used portable compressors in the world are part of the BASIC series.Compact and lightweight, the models meet the needs of high pressure breathable air for the diving world, recreational activities, fire-fighting services and small paintball facilities.

Fuera de Stock

Ask us about availability

Accessories and spare parts

Coltri intake Air Filter for MCH6

SC000345

25.99 €

Air intake filter for Nuvair (3-3.5), Coltri (MCH6), American Airworks (Fast 35), Max-Air (35) and Nautica.

Fuera de Stock

Ask us about availability

Accessories and spare parts

Coltri remote intake kit

HC010302

58.08 €

3 meter remote suction kit. To be used with Portables and Third Lung compressors. Really important when we use gasoline compressors.

Fuera de Stock

-15.09%

Ask us about availability

Accessories and spare parts

Coltri V-Belt for MCH6

CINGA31

18.68 € 22.00 €

Fuera de Stock

Ask us about availability

inicio

copy of Fourth Element Argonaut 2.0 Stealth Hybrid Woman

2,750.00 €

Durability and freedom of movement. Using a combination of the Stealth fabric on the torso and arms of the suit, with Flex trilaminate lower body, the Stealth Hybrid suit gives excellent mobility, outstanding durability and the ultimate fit, thanks to the unique BIOMAP system and Argonaut 2.0 design.

Fuera de Stock

Ask us about availability

ANALYZERS

Dive Soft Freedom Nitrox Analyzer

#8117

193.60 €

Additional device for the Freedom computer for nitrox analysis (the measuring of oxygen concentration in the breathing mixture). You only need to connect it to a connector of the Freedom computer of any software version and you can measure. The analyzer is supplied WITHOUT an oxygen sensor. Use Divesoft R22S oxygen sensor with Molex 3-pin connector (or...

Showing 97-120 of 195 item(s)

Product added to wishlist