DIVE GEAR

LIGHTING

Photo and Video

JACKETS

REGULATORS

BACKPLATES/WINGS

SUITS

Sidemount/Caving

Adjustable Fins

Foot Pocket Fins

MASK

COMPUTERS

REGULATOR HOSE (Rubber & Miflex)

CONTROL INSTRUMENTS

STEEL HARDWARE

DECO ESSENTIALS

REELS, WETNOTES, BUOYS...

Knifes & Cutters

BUNGEE MOUNTS/COMPASS

Sealing systems

DRYSUIT INFLATOR SYSTEMS

TANKS/VALVES

pee-valve, condoms, quick connec

Gas fills, analysis & decanting

ANALYZERS

ADAPTERS

Transport bags

Hygiene and Care

Weight

Tools

Face Mask

Miscellaneous

Compressors

Pre Owned

Scooters

Outlet

Lifting Balloons

En Stock

Available

Spare, Accessories

SUEX Smart Lock Tow Rope without Carabiners

72499

69.01 €

SMART LOCK is the brand-new “tow cord” designed by SUEX to make your underwater navigation experience easier and safer. This special tow cord fits any type of DPV. Equipped with a simple bolt snap, this innovative mechanism allows for quick, simple, and effective adjustment of the towing line length even when wearing thick gloves or drysuits. The material...

En Stock

Available

Spare, Accessories

SUEX soporte de transporte

70606

105.00 €

Support designed to keep the scooter in a horizontal position during transport, in the car, boat, etc., allowing for secure anchoring and preventing rotation. A fabric strap with Velcro allows for quick positioning.

En Stock

Available

Spare, Accessories

Suex standard harness

70221

49.00 €

Harness for towing the diver while using the DPV, compatible with all models. Essential for divers who do not have a GAV with a front tow ring. The towing force is thus applied to the diver’s body and not to the arms. Fully adjustable, fits all sizes.

En Stock

Available

Spare, Accessories

Suex Tow line with Bolt Snap

70547

25.00 €

Kit contains bolt snap, leash and elastic. The bolt snap and leash must be correctly attached to the scooter to allow for quick adjustment of the length. The elastic is essential for holding the top of the scooter during transport.

En Stock

Available

Spare, Accessories

SUEX VR Buddy Main O-Ring

72586

12.00 €

VR Models Main Body O-Ring 6,7mmø x 180mm

En Stock

Available

STEEL HARDWARE

Teflon washer

jdve0027

1.00 €

Teflon washer especially indicated for aluminum backplates in order to prevent the contact of the steel screws with the backplate. Perfectly suitable also for use on steel backplates as a washer without more ... 1mm thick x 16mm in diameter. Suitable for screws up to 8mmø

En Stock

Available

STEEL HARDWARE

Trim bar glider "T" type

80135

3.86 €

Multipurpose "T" type stainless steel retainer. Dimensions of the slots up to use with standard 5cm wide webbing.

En Stock

Available

STEEL HARDWARE

Trim bar glider with double Ring

80313

3.30 €

Stainless steel retainer for 5cm webbing with rings on both sides. Exterior measure: 57mm x 33mm Slots measure: 52mm x 6mm Interior measure of the rings: 25m x 19mm Thickness: 1.5mm

En Stock

Available

SPARE PARTS & EXTRAS

Valve filter

VLV-FIL-0001

2.47 €

Filter for valves type BtS, Scubapro, DIRZONE and many others brands. If you have any questions regarding compatibility, please contact us.

Fuera de Stock

Ask us about availability

REGULATOR ACCESORIES

90º HP elbow connector

XS-HL403-90

13.22 €

Adapter elbow for HP connections. It has a 7/16 "female connection and a 7/16" male connector with nipple included

Fuera de Stock

Ask us about availability

STEEL HARDWARE

Adjustable D-Ring with bungee

80208

6.00 €

Adjustable stainless steel ring with standard 5cm wide slot, already bungee mounted Ideal for quick position adjustment

Fuera de Stock

Ask us about availability

J.Dive Systems

Aluminium single tank adapter STA

28.93 €

Adapter for Single Tank in Alu-minium Measures: 33cm x 8,8cm Weight: more or less, 210gr.

Fuera de Stock

Ask us about availability

inicio

Crotch strap 5cm wide ( 2")

30045

12.27 €

Crotch strap 5cm wide and very soft to the touch to prevent damage to the diving suit and make it more comfortable when closing the legs around it. It has a front D-Ring up to fix the scooter, and also a rear D-Ring.

Fuera de Stock

Ask us about availability

STEEL HARDWARE

D-Ring 50mm x 47mm

80129

1.83 €

Flat Stainless Steel D-Ring with interior dimensions in its widest parts of: 51mm wide x 49mm long Thread diameter 5mm

Fuera de Stock

Ask us about availability

STEEL HARDWARE

D-Ring Bend

80130

2.01 €

Bend Steel D-Ring with interior dimensions in its widest parts of: 51mm wide x 47mm long Thread diameter 5mm

Fuera de Stock

Ask us about availability

STEEL HARDWARE

D-Ring perfil bajo

80136

2.33 €

Flat SS D-Ring with interior dimensions in its widest parts of: 51mm wide x 26mm long Thread diameter 5mm

Fuera de Stock

Ask us about availability

inicio

Harness webbing with Grommet, soft

30044

15.85 €

Harness webbing with a slightly softer hardness than the standard one, ideal for adjustable harnesses that require the webbing to run smoothly through buckles and/or rings. Despite its softness, it is highly resistant and perfect for any type of harness, whether adjustable or continuous webbing. It has a stainless steel eyelet already installed and is...

Fuera de Stock

Ask us about availability

Harness & Backplates

J.Dive Aluminium Backplate

80143-1

96.56 €

The J.Dive Systems Backplates are made of high-strength marine grade aluminum, also finished with extra strong anodizing in dark gray, which makes them withstand even more the harsh treatment to which diving material is subjected. They are the universal standard, making them compatible with any twin tank wing and with many single tank wings, depending in...

Fuera de Stock

Ask us about availability

STEEL HARDWARE

Ladder ring

80083

3.30 €

Ring to mount on the belt as shown in the photo. Its measures are: Totals: 38 x 99mm Internal measurement of the useful part: 33 x 28 mm. NOTE: The price is for a single unit. The double photo is by way of illustration.

Fuera de Stock

Ask us about availability

J.Dive HQ rubber hoses

Regulator Hose, hookah

30.56 €

Hookah hose with standard 3/8" and 9/16" regulator connections. Do you need any other length or connection type? no worries, we can make for you, ask you about it...

Fuera de Stock

Ask us about availability

Spare, Accessories

Suex 3A Li-Ion charger for VXR / XJVR

71101RIC

96.50 €

NOTE: The image may not match the product; it shows an unspecified SUEX charger for illustrative purposes only. The charger supplied will always be the one described.

Fuera de Stock

Ask us about availability

Spare, Accessories

SUEX all purpose support

71144

184.00 €

Action-CAM holder, safe and durable. Can also accommodate larger cameras. Compatible with all DPV models, very easy to install without tools. The standard ¼” screw, floats and special holders for underwater lamps or illuminators are supplied. The inner surface of the strap is coated with non-slip material.

Fuera de Stock

Ask us about availability

Spare, Accessories

SUEX carry handle

71415

56.00 €

Additional carrying handle made of semi-rigid tape, equipped with elastic rings for securing the bolt snap of the tow leash. Equipped with an adjustable stainless steel strap, it can be firmly secured to the body of the scooter. For XJ, XK, 7SEVEN... series Ø195.

Fuera de Stock

Ask us about availability

Spare, Accessories

Suex charger 7A Li-Ion for VXR, XJVR

71102RIC

133.00 €

NOTE: The image may not match the product; it shows an unspecified SUEX charger for illustrative purposes only. The charger supplied will always be the one described.

Showing 97-120 of 158 item(s)

Product added to wishlist