DIVE GEAR

LIGHTING

Photo and Video

JACKETS

REGULATORS

BACKPLATES/WINGS

SUITS

Sidemount/Caving

Adjustable Fins

Foot Pocket Fins

MASK

COMPUTERS

REGULATOR HOSE (Rubber & Miflex)

CONTROL INSTRUMENTS

STEEL HARDWARE

DECO ESSENTIALS

REELS, WETNOTES, BUOYS...

Knifes & Cutters

BUNGEE MOUNTS/COMPASS

Sealing systems

DRYSUIT INFLATOR SYSTEMS

TANKS/VALVES

pee-valve, condoms, quick connec

Gas fills, analysis & decanting

ANALYZERS

ADAPTERS

Transport bags

Hygiene and Care

Weight

Tools

Face Mask

Miscellaneous

Compressors

Pre Owned

Scooters

Outlet

Lifting Balloons

Fuera de Stock

on demand

Lola Valves

Lola T-SVO 300 BD Nitrox right valve 3/4"

T-SVO 300 BD NITROX-R

214.75 €

Really robust valve with a design studied to facilitate handling in any environment, no matter how narrow or difficult, significantly increasing the user's speed of action and consequently general safety. It has two outlets, each activated by its own shut-off valve, in this way double outlets can be mounted on single cylinders, twin sets, supports for...

Fuera de Stock

Ask us about availability

Lola Valves

Lola T-SVO 300 Nitrox left valve

T-SVO 300 NITROX-L

179.00 €

Fuera de Stock

Ask us about availability

Lola Valves

Lola T-SVO 300 Nitrox right valve

T-SVO 300 NITROX-R

179.00 €

En Stock

Available

Lola Valves

Lola Valve Hand Wheel KV

20.97 €

Valve Hand Wheel for Lola Valves. NOTE: the vale is not included.

En Stock

Available

Lola Valves

Lola Valve Seat

Seat TKV

12.73 €

Seta for Valves T-SV and T-SVO

En Stock

Available

Lola Valves

Lola Valve Shaft

Valve Shaft

15.77 €

Lola Valve Shaft

Fuera de Stock

Ask us about availability

Lola Valves

Lola Valves Service Kit

V set II-Air

25.74 €

Service Kit for Lola T-SV and T-SVO valves for use with Aire, trimix and Nitrox up to 40%

Fuera de Stock

on demand

Lola Valves

Lola Valves Set T-SVO 200 BD Nitrox 3/4"

SET T-SVO 200 BD NITROX

411.89 €

Set of right and left speleo valve for tanks with 3/4'' NPSM thread 200Bar / 2900psi intended mainly for double assembly and SCR devices. Valves are oxygen clean (nitrox). The burst disc port is fitted with a plug. Really robust valve with a design studied to facilitate handling in any environment, no matter how narrow or difficult, significantly...

Fuera de Stock

on demand

Lola Valves

Lola Valves Set T-SVO 200 Nitrox

SET T-SVO 200 NITROX

344.00 €

Set of right and left speleo valve for tanks with M25 thread 200Bar / 2900psi intended mainly for double assembly and SCR devices. Valves are oxygen clean (nitrox). The burst disc port is fitted with a plug. Really robust valve with a design studied to facilitate handling in any environment, no matter how narrow or difficult, significantly increasing the...

Fuera de Stock

on demand

Lola Valves

Lola Valves Set T-SVO 300 BD Nitrox 3/4"

SET T-SVO 300 BD NITROX

411.89 €

Set of right and left speleo valve for tanks with 3/4'' NPSM thread 300Bar / 4350psi intended mainly for double assembly and SCR devices. Valves are oxygen clean (nitrox). The burst disc port is fitted with a plug. Really robust valve with a design studied to facilitate handling in any environment, no matter how narrow or difficult, significantly...

Fuera de Stock

on demand

Lola Valves

Lola Valves Set T-SVO 300 Nitrox

SET T-SVO 300 NITROX

344.00 €

Set of right and left speleo valve for tanks with M25 thread 300Bar / 4350psi intended mainly for double assembly and SCR devices. Valves are oxygen clean (nitrox). The burst disc port is fitted with a plug. Really robust valve with a design studied to facilitate handling in any environment, no matter how narrow or difficult, significantly increasing the...

Fuera de Stock

Ask us about availability

Lola Valves

Lola ZV Blind-End Plug G5/8" (DIN) 300 Bar

ZV 300

20.65 €

Blind-end plug with pressure release screw

En Stock

Available

Lola Valves

Lola ZV Blind-End Plug G5/8" (DIN) 200Bar

ZV 200

20.25 €

Blind-end plug with pressure release screw

En Stock

Available

Lola Valves

Lola ZV-T G5/8" 300 Bar DIN Plug

ZV-T 300

24.79 €

The ZV-T plug protects the valve from contamination and from gas leakage from the bottle during transport. To release the gas and unscrew the plug, you just turn the rotary wheel (there is no need of key). The plug can be easily unscrewed even when under pressure. You just screw in the plug (we recommend to briefly open and close the valve). We also offer...

En Stock

REGULATOR ACCESORIES

LP Hose Splitter 90º

J.Dive-twin90

30.00 €

Output multiplier made of stainless steel with one output oriented at 180º and another at 90º with respect to the input Allows the attachment of two low pressure regulator hoses (first stage ends) One 9/16-18 male inlet to two 3/8-24 female outlets Low pressure only Dimensions of the block: 30 x 23 x 15mm

En Stock

Available

REGULATOR ACCESORIES

LP Hose Splitter 90º 1st stage

J.Dive-twin90-1st

30.00 €

Output multiplier made of stainless steel with two output oriented at 90º Allows the attachment of two low pressure regulator hoses (first stage ends) One 3/8" male (to attach to the 1st stage) to two 3/8-24 female outlets Low pressure only Dimensions of the block: 30 x 23 x 15mm

En Stock

Available

Rubber Hoses Plus

Lp regulator hose 1/2" PLUS

23.53 €

A high quality hose with a perfect finish on the press bushings that prevents oxidation in case of being used in hard water environments, such as caves which, despite being fresh water, are in many cases the most aggressive for fish. metals such as brass and aluminum, due to their degrees of acidity... Finally, their perfect pressing, which gives us...

En Stock

-20%

Available

RUBBER HIGH TECH

LP Regulator Hose High Tech (3/8")

28.23 € 35.29 €

Unlike the rest of the hoses available on the market, these use a tube of a single material, a single layer. This makes the terminals press on the tube (the area where they usually die, due to the creases of the pressing) do not produce creases between layers. This gives us 2 great advantages, the first, it will make longer his operating life. The second...

Fuera de Stock

Ask us about availability

ALU.TANKS

Luxfer 7 liters aluminium tank Dirty Beast

A16216512

228.93 €

Luxfer aluminum tank, 7l capacity, 207Bar Clean and in O2 service Neck thread: 25x2 EN-144-Flat valve not included Do you need the valve? click here and choose the one you need. Let us know if you need we assembly it

Fuera de Stock

Ask us about availability

ALU.TANKS

Luxfer Aluminium tank 7 l

A16216501

236.36 €

Luxfer aluminum tank, 7l capacity, 207Bar Clean and in O2 service Neck thread: 25x2 EN-144-Flat valve not included DO YOU NEED THE VALVE? CLICK HERE AND CHOOSE THE ONE YOU NEED. LET US KNOW IF YOU NEED WE ASSEMBLY IT

Fuera de Stock

Ask us about availability

ALU.TANKS

Luxfer Aluminium tank S040 Dirty Beast

S040-lux

200.00 €

Luxfer aluminium cylinder S040 5.7 liters / 40 cu ft 207 bar working pressure CE certified Do you need any other valve type not available on the menu? Follow these links for more options: GENERAL VALVES: LOLA VALVES:

Fuera de Stock

Ask us about availability

ALU.TANKS

Luxfer Aluminium tank, 0,35l

143.70 €

Luxfer Aluminium 0.35 liters tank There are three valves options: Inert gas W21,8DIN standardDIN male with pressure relieve function Characteristics: Working pressure: 300 BarNeck Thread: M18.5Capacity: 0,35 litersDiameter: 60mm

Fuera de Stock

Ask us about availability

ALU.TANKS

Luxfer aluminium tank, 0,5 l

144.54 €

Luxfer Aluminium 0.5 liters tank There are three valves options: Inert gas W21,8DIN standardDIN male with pressure relieve function Characteristics: Working pressure: 200 BarNeck Thread: M18.5Capacity: 0,5 litersDiameter: 68mm

Fuera de Stock

On demand

ALU.TANKS

Luxfer Aluminium tank, 3l

159.66 €

Luxfer 3 liters Work pressure: 232Bar Capacity: 3 liters Vol.: 696 liters Dimensions: 111mm X 515mm There are some different options of valves: Mono DIN or M26 Nx Modular DIN or M26 Nx DIN or M26 rebreather type

Fuera de Stock

Ask us about availability

ALU.TANKS

Luxfer Aluminium, 0,85l

117.65 €

Characteristics: Working pressure: 200 Bar Neck Thread: M18.5 Capacity: 0,55 liters Diameter: 81mm Lenght: 279mm Weight: 1,18kg There are three valves options: Inert gas W21,8 DIN standard DIN male with pressure relieve function

Fuera de Stock

Ask us about availability

ALU.TANKS

Luxfer Aluminium, 1,5 l

119.33 €

Features: Working pressure: 230Bar Capacity: 1.5 liters Neck thread: M25 Diameter: 111mm There are some different options of valves: Mono DIN or M26 Nx Comptec type, DIN or Inert Gas W21,8 Modular DIN or M26 Nx DIN or M26 rebreather type

Fuera de Stock

-10%

Out-of-Stock

ALU.TANKS

Luxfer Aluminium, S080

A16216522

309.33 € 343.70 €

Luxfer aluminium cylinder S080 10,6 liters / 80 cu ftAs optional with valve type, 5/8Gas, M26 EU NItrox, expandable or singleColor option, Dirty Beast207 bar working pressureCE certified

View

En Stock

Available

valves

M25 cap for scuba tanks.

plas-m25

1.03 €

To avoid teh entry of dust or any other thing while the tanks is not being using and it has not valve NOTE: The photo shows both possible plug options for illustrative purposes. The price is for ONE UNIT.

Fuera de Stock

Ask us about availability

REGULATOR ACCESORIES

M26 Blind Plug

ACRT-45-hembra

3.80 €

En Stock

Available

SPARE PARTS & EXTRAS

M26 Blind Plug

ACRT-45-macho

4.00 €

En Stock

Available

Miscellaneous

Magnetic Connector

415804

24.75 €

The innovative magnetic securing system by Mares is the ultimate way to connect your diving accessories and equipment. Gone are the days of dangling hoses and lost dive lights. The Magnetic Connector is a versatile and unique system that includes many uses such as an octopus and console holder, torch/dive light hook, camera attachment, and much more!

En Stock

Available

Spare parts

Male nipple

303046

5.37 €

Male nipple for wing inflator end piece

En Stock

Available

REGULATOR ACCESORIES

male/male 9/16" to 3/8" adapter

SFADT028

4.96 €

En Stock

-20%

Available

valves

Manifold

38.32 € 47.90 €

3 options available: For 5, 7 and 8.5 liter Cylinder (140 mm diameter), up to 300 bar For 8, 10 and 12 liter Cylinder (171 mm diameter), up to 300 bar For 12, 15, 16, 18 and 20L Cyl.(204 mm diameter), up to 300 bar Choose the right one from the dropdown menu

En Stock

REGULATOR ACCESORIES

Manifold 8 outputs

J.Dive-manifold8

78.51 €

Manifold block assy with 8b 3/8" standard outputs Solid brass construction for maximum durability Oxygen Compatible. Dimensions: 57 x 57 x 19mm Weight: 360gr

Fuera de Stock

Out-of-Stock

REGULATOR ACCESORIES

Manifold Gas Switch Block

J.Dive-block

202.48 €

Manifold block assy - Right Hand Oriented (2 gas input / 1 gas output) Solid brass construction for maximum durability Oxygen Compatible Materials and O-rings All connections are4 3/8" standard The M&J ENG Gas Switch Block allows a diver to change between two separate air tanks without having to remove their full face mask, BOV or whatever used......

View

Showing 2053-2088 of 4150 item(s)