DIVE GEAR

LIGHTING

Photo and Video

JACKETS

REGULATORS

BACKPLATES/WINGS

SUITS

Sidemount/Caving

Adjustable Fins

Foot Pocket Fins

MASK

COMPUTERS

REGULATOR HOSE (Rubber & Miflex)

CONTROL INSTRUMENTS

STEEL HARDWARE

DECO ESSENTIALS

REELS, WETNOTES, BUOYS...

Knifes & Cutters

BUNGEE MOUNTS/COMPASS

Sealing systems

DRYSUIT INFLATOR SYSTEMS

TANKS/VALVES

pee-valve, condoms, quick connec

Gas fills, analysis & decanting

ANALYZERS

ADAPTERS

Transport bags

Hygiene and Care

Weight

Tools

Face Mask

Miscellaneous

Compressors

Pre Owned

Scooters

Outlet

Lifting Balloons

En Stock

-15%
New

Available

Mask

Seac Sub Wild AT Mask Anti Fog

75-95VM/SGR

46.71 € 54.96 €

Low-volume mask with silicone skirt overmolded on the frame, minimizing the need for equalization for maximum stability and comfort. Excellent peripheral vision: the geometry of the lenses expands the field of vision, for a more immersive experience. 3D buckle directly on the skirt: quick, safe, and precise adjustment, even underwater.

En Stock

-15%
New

Available

Mask

Seac Sub Wild AT Mask Anti Fog Black

75-95N/SBL

46.71 € 54.96 €

En Stock

Available

SPARE PARTS & EXTRAS

Seat tank valve assembly

5.49 €

Depending on the type / brand / manufacturer of the tank valve, it will be needed one of the 4 shown in the photo. Choose the appropriate one for your tank valve from the drop-down menu.

En Stock

Available

valves

Second Outlet for DIN Mono Valve 230bar

A16310617

61.98 €

Second Outlet for DIN Mono Valve230bar - left - incl. rubber knob"

En Stock

Available

Service kits and O-Rings

Small kit of O-Rings

jnt-kit-0001

11.30 €

A kit with the main diving O-rings that we may need at any time.It comes in a 5cm diameter can that will fit us anywhere.It has viton and standard O-Rings for: bottleneck, two-measure of DIN, for the HP hose, for the HP nipple, for the regulator hose (both terminals), a nipple for the HP gauge-hose and a schrader valve nipple for the inflator hose.

En Stock

available

SPARE PARTS & EXTRAS

Sparepart Set (for all valves and manifolds)

A16310640

21.49 €

Complete Kit to carry out the revision and tuning of the BtS, Scubapro and many other valves and manifolds. Ask us for any questions about compatibility with your valve type. NOTE: the O-ring can be green or black, in both cases compatible with O2 using specific grease.

Fuera de Stock

Ask us about availability

SPARE PARTS & EXTRAS

Sparepart Set (for all valves)

14.10 €

Depending on the type / brand / manufacturer of the valve, one of the 3 shown in the photo will be needed.They are also available with classic or Viton O-rings.Choose the appropriate type and material from the drop-down menus.

En Stock

Available

SPARE PARTS & EXTRAS

Sparepart Set (for all valves) Nitrox

16.52 €

Depending on the type / brand / manufacturer of the valve, one of the 3 shown in the photo will be needed.These kits are Oxygen compatibleChoose the appropriate one from the drop-down menu.

En Stock

Available

STEEL HARDWARE

stainless-steel belt buckle

A21910601

7.44 €

En Stock

Available

Steel Tanks

Steel tank 15 liters 232Bar Eurocylinder

347.11 €

Volume: 15l Fill pressure: 232bar Thread: M25x2 Diameter: 204mm Length: 640mm Weight: 17,4kg Color: white Tanks with valve has included the tank base Do you need any other valve type not available on the menu? Follow these links for more options: GENERAL VALVES: LOLA VALVES: PLEASE, ASK US FOR THE SPECIAL SHIPMENT CONDITIONS ECS Tanks are made in...

En Stock

Available

SPARE PARTS & EXTRAS

Stem with O-ring and Teflon Packing

8.00 €

Depending on the type / brand / manufacturer of the tank valve, it will be needed one of the 2 shown in the photo. They are also available mounted with classic or Viton O-rings.Choose the appropriate type and material from the drop-down menus.

Fuera de Stock

Ask us about availability

COMPLEMENTS

Tank Boot

10.74 €

Tank Boot, available in three sizes: Item nº 1: for 140mm tanks (5, 7 and 8.5 liters) Item nº 2: for 171mm tanks (8, 10 and 12 liters long) Item nº 3: for 204mm tanks (12 liter short, 15, 18 and 20 liters) Choose the appropriate one from the dropdown menu NOTE: The tank boot may vary slightly from the picture, this is shown for illustrative purposes only.

En Stock

Available

inicio

Tank Carrier Handle

ACC-BOT-0001

16.00 €

Fixed scuba tank holder handle. Ergonomic handle to prevent slipping. Fixing with 2 steel screws.

En Stock

-10%

Available

valves

Twin tank valves with isolation 232Bar

168.84 € 187.60 €

Oxygen Clean G5/8" 232Bar twin tank valves with isolation. Available for: 5 and 7 liters (140mm) 7liters wide and 8, 10, 12liters long (171mm) 12, 15, 18 and 20 liters (204mm) 11,1 liters aluminium, S080 (186mm)

Fuera de Stock

-12%

Ask us about availability

COMPLEMENTS

V-weight Coated

28.36 € 32.23 €

V-weight coated with resin to prevent the inevitable wear of the lead piece from contaminating the environment. The resin cover is hard and highly resistant, it is completely attached to the lead piece, thus avoiding premature wear and breakage. These V-weight leads are designed to be mounted on twin tanksright between the backplate and the tanks,...

En Stock

Available

SPARE PARTS & EXTRAS

Valve knob short

A16310623-short

6.60 €

39mm long knob, slightly shorter than standard ones

Fuera de Stock

Ask us about availability

DRYSUIT INFLATOR SYSTEMS

1st stage with 4 LP connections

A13110601

115.70 €

Unbalanced 1st Stage, DIN, 300 bar; G5/8" thread, 300 bar, 1 HP port and 4 LP ports

Fuera de Stock

Ask us about availability

TWIN TANKS

8,5 twin tanks concave base

748.76 €

Fuera de Stock

Ask us about availability

REGULATOR ACCESORIES

Adapter 1/2" to 3/8"

ACRT-25

6.60 €

3/8" to 1/2" adaptor Female 1/2" Male 3/8" NOTE: the image may not exactly match the item

Fuera de Stock

Ask us about availability

Boat Emergency Kits

Backpack For Single Tank

ACC-BCD-0001

38.83 €

Backpack to assemble the tank quickly and simply to be able to carry out simple operations. Ideal for boats in order to be able to inspect the hull, untangle propeller lines, unscrew the anchor, etc... The body is made of ultra resistant plastic and has a harness to be able to fix and adjust it to the body and a tank holder strap to be able to firmly hold...

Fuera de Stock

Ask us about availability

TWIN TANKS

Black Edition 2x12 concave twin tanks

S16716661

779.34 €

The range of steel cylinders is produced by Eurocylinders System AG (ECS).ECS is one of the biggest and most efficient manufacturers of high pressure steel cylinders in Europe with an annual output of more than 500,000 cylinders.

Fuera de Stock

On demand

DRYSUIT INFLATOR SYSTEMS

Complete drysuit inflation system W21,8

233.88 €

COMPLETE DRY SUIT INFLATION SYSTEMS, ALU OR STEEL CYLINDERS - 0,85 TO 3 LITRES. Drysuit Inflation Systems developed by BtS consisting of a Cylinder (aluminium or steel), Cylinder Valve (W21,8 inert gas), First Stage, and Cylinder Mounting Straps.

Fuera de Stock

Ask us about availability

CONTROL INSTRUMENTS

Cylinder pressure testing gauge, DIN, up to 300 bar

A16910604

78.51 €

Surface pressure gauge for checking tnaks pressure. Able up to 400Bar, connection DIN 300Bar

Fuera de Stock

Ask us about availability

Gas fills, analysis & decanting

Digital gauge Oxygen compatible

DGP-OXY-0068

168.59 €

Digital pressure gauge Oxygen compatible . Measurements: 68mm Scales: 5 Connection: G1/4"

Showing 145-168 of 253 item(s)

Product added to wishlist