DIVE GEAR

LIGHTING

Photo and Video

JACKETS

REGULATORS

BACKPLATES/WINGS

SUITS

Sidemount/Caving

Adjustable Fins

Foot Pocket Fins

MASK

COMPUTERS

REGULATOR HOSE (Rubber & Miflex)

CONTROL INSTRUMENTS

STEEL HARDWARE

DECO ESSENTIALS

REELS, WETNOTES, BUOYS...

Knifes & Cutters

BUNGEE MOUNTS/COMPASS

Sealing systems

DRYSUIT INFLATOR SYSTEMS

TANKS/VALVES

pee-valve, condoms, quick connec

Gas fills, analysis & decanting

ANALYZERS

ADAPTERS

Transport bags

Hygiene and Care

Weight

Tools

Face Mask

Miscellaneous

Compressors

Pre Owned

Scooters

Outlet

Lifting Balloons

En Stock

Available

Chemicals

SEADROP

40230

7.95 €

When you’re snorkeling or diving, the last thing you want is a foggy dive mask. A quick application of Sea Drops™ anti-fog drops by M Essentials™ cleans lenses and gets rid of fog, giving you a crystal clear view of the underwater world.Easy to use in the field and safe for silicone and rubber frames, Sea Drops is concentrated, long-lasting and...

En Stock

Available

valves

Second Outlet for DIN Mono Valve 230bar

A16310617

75.00 €

Second Outlet for DIN Mono Valve230bar - left - incl. rubber knob"

En Stock

Silicone disc to remove the 2n stage frontal

Available

Tools

Silicone disc to remove the 2n stage frontal

cr-01

9.08 €

En Stock

available

SPARE PARTS & EXTRAS

Sparepart Set (for all valves and manifolds)

A16310640

26.00 €

Complete Kit to carry out the revision and tuning of the BtS, Scubapro and many other valves and manifolds. Ask us for any questions about compatibility with your valve type. NOTE: the O-ring can be green or black, in both cases compatible with O2 using specific grease.

En Stock

Available

inicio

Spring straps for Jet Fin type fins

28.50 €

Pair of universal fin spring straps for Jet Fin type fins (Scubapro, OMS and similar...) The springs and closures are made of steel and have a rubber handle to facilitate putting on and taking off. Measurements from close to close: M: 23.5cm L: 25cm XL: 26.5cm

En Stock

Available

inicio

Springs straps, universal

37.30 €

Pair of lug-type universal spring fin straps for most fins with universal standard holder type, like Cressi, Mares, etc. The springs and closures are made of steel and have a rubber handle to facilitate putting on and taking off Measurements lock to lock (centre of lug holder hole): M: 29,5 L: 30,5 XL: 33,5

En Stock

Available

STEEL HARDWARE

stainless-steel belt buckle

A21910601

9.00 €

En Stock

Available

REGULATOR ACCESORIES

Tank and Regulator Blind plug (DIN)

ACRT-05

7.50 €

Set of female and male plugs for the DIN of the regulator and the cylinder valve, G5/8" threads (DIN)

Fuera de Stock

Ask us about availability

COMPLEMENTS

Tank Boot

13.00 €

Tank Boot, available in three sizes: Item nº 1: for 140mm tanks (5, 7 and 8.5 liters) Item nº 2: for 171mm tanks (8, 10 and 12 liters long) Item nº 3: for 204mm tanks (12 liter short, 15, 18 and 20 liters) Choose the appropriate one from the dropdown menu NOTE: The tank boot may vary slightly from the picture, this is shown for illustrative purposes only.

En Stock

-18%

Available

TANKS & MORE...

Tanks fixation

ACCB-20

73.07 € 89.10 €

Tanks fixation Perfect to attach any pony tank like the Argon tank or extra Oxygen tank, to another tank or to the rebreather canister side It´s Stainless Steel made

En Stock

-15%

Available

Wetsuits Boots

Tecnomar S65 Zip 5 mm booties

60.59 € 71.28 €

The new S65 dive boots are designed to be comfortable and durable, with a grippy sole. The soft yet durable rubber sole keeps divers comfortable and protected. 5mm NYLON II titanium boots with slipper sole. Double guled and blind stitched construction. Heel and toe reinforcements for durability and protection. Ultra durable 10 YKK zipper. Built-in fin...

En Stock

Available

Care & reparations

TRE PINI Polyurethane adhesive glue, 400gr

CTPS500

22.70 €

Transparent glue to make arrangements in dry and wet suits, neoprene and trilaminates. Essential when changing sleeves, installations and arrangements of all kinds in general.

Fuera de Stock

Ask us about availability

SCUBA Mask

Turtle Mask

39.00 €

Dedicated mask to the lovers of the vintage gear, and for UW-photo.Built in trasnparent silicone.Stainless Steel ring.

En Stock

-10%

Available

valves

Twin tank valves with isolation 232Bar

204.30 € 227.00 €

Oxygen Clean G5/8" 232Bar twin tank valves with isolation. Available for: 5 and 7 liters (140mm) 7liters wide and 8, 10, 12liters long (171mm) 12, 15, 18 and 20 liters (204mm) 11,1 liters aluminium, S080 (186mm)

En Stock

Available

inicio

Universal fin strap with buckles

AC-25-7L

25.92 €

Universal fin strap with buckles, strap width 26mm

Fuera de Stock

-12%

Ask us about availability

COMPLEMENTS

V-weight Coated

34.32 € 39.00 €

V-weight coated with resin to prevent the inevitable wear of the lead piece from contaminating the environment. The resin cover is hard and highly resistant, it is completely attached to the lead piece, thus avoiding premature wear and breakage. These V-weight leads are designed to be mounted on twin tanksright between the backplate and the tanks,...

En Stock

Available

SPARE PARTS & EXTRAS

Valve knob short

A16310623-short

7.99 €

39mm long knob, slightly shorter than standard ones

Fuera de Stock

Ask us about availability

DRYSUIT INFLATOR SYSTEMS

1st stage with 4 LP connections

A13110601

140.00 €

Unbalanced 1st Stage, DIN, 300 bar; G5/8" thread, 300 bar, 1 HP port and 4 LP ports

Fuera de Stock

Ask us about availability

TWIN TANKS

8,5 twin tanks concave base

906.00 €

Fuera de Stock

Adaptador NEVOC 30 para HELIO (gas inerte) 300Bar

Ask us about availability

ADAPTERS

Adaptador NEVOC 30 para HELIO (gas inerte) 300Bar

US-1130

99.00 €

300Bar Inert Gas Adapter (Helium, Nitrogen, Argon ...) Connection type is NEVOC W30 X 2 type 30, to ISO 5145 (G1 4 ")

Fuera de Stock

Ask us about availability

TWIN TANKS

Black Edition 2x12 concave twin tanks

S16716661

943.00 €

The range of steel cylinders is produced by Eurocylinders System AG (ECS).ECS is one of the biggest and most efficient manufacturers of high pressure steel cylinders in Europe with an annual output of more than 500,000 cylinders.

Fuera de Stock

On demand

DRYSUIT INFLATOR SYSTEMS

Complete drysuit inflation system W21,8

282.99 €

COMPLETE DRY SUIT INFLATION SYSTEMS, ALU OR STEEL CYLINDERS - 0,85 TO 3 LITRES. Drysuit Inflation Systems developed by BtS consisting of a Cylinder (aluminium or steel), Cylinder Valve (W21,8 inert gas), First Stage, and Cylinder Mounting Straps.

En Stock

Available

valves

Comptec Valves

78.00 €

Comptec type valves 5 different valves for the different models of dry suit inflation system tanks. Inert Gas valve for tanks with M18/1.5 neck Inert Gas valve for tanks with M25x2 neck 5/8 GAS valve (DIN 232Bar) for tanks with M18/1.5 neck and M25x2 neck 5/8 GAS valve (DIN 232Bar) for tanks with M25x2 neck 5/8 GAS valve (DIN 300Bar) for tanks with...

Fuera de Stock

On demand

Spare parts

copy of Halcyon Zero Gravity Inner bladder (with upgrade kit)

14080100 ZG

145.20 €

Halcyon Zero Gravity Wing Inner Bladder Replacement NOTE: Old wing bladders are no longer available. In order to replace the bladder on older Halcyon wings the thread upgrade kit is required as the new thread screws have changed. This product includes everything needed to update threads. The bladder includes and installs the males for mounting the elbow...

Showing 145-168 of 338 item(s)

Product added to wishlist