DIVE GEAR

LIGHTING

Photo and Video

JACKETS

REGULATORS

BACKPLATES/WINGS

SUITS

Sidemount/Caving

Adjustable Fins

Foot Pocket Fins

MASK

COMPUTERS

REGULATOR HOSE (Rubber & Miflex)

CONTROL INSTRUMENTS

STEEL HARDWARE

DECO ESSENTIALS

REELS, WETNOTES, BUOYS...

Knifes & Cutters

BUNGEE MOUNTS/COMPASS

Sealing systems

DRYSUIT INFLATOR SYSTEMS

TANKS/VALVES

pee-valve, condoms, quick connec

Gas fills, analysis & decanting

ANALYZERS

ADAPTERS

Transport bags

Hygiene and Care

Weight

Tools

Face Mask

Miscellaneous

Compressors

Pre Owned

Scooters

Outlet

Lifting Balloons

Fuera de Stock

Ask us about availability

Lola Valves

Lola Manifold T-SP 200Bar

Valve connector T-SP-200Bar

147.04 €

Connection DIN G5/8" 230Bar direct to valve The manifold does not have an insulating valve because you already have one in each side valve, in this way we are able to isolate and eliminate even more failures, such as those of the manifold O-Rings. It is also more robust than conventional manifols. Even more, this manifold allows the twins to be assembled...

Fuera de Stock

Ask us about availability

COMPLEMENTS

Lola Nut M8 for Backplate

MZD-B

11.57 €

Knurled nut M8 to tighten the backplate without using tightening tools. Price per piece. NOTE: the photo shows both sides of the piece for illustrative purposes, the price is ONLY FOR ONE PIECE

Fuera de Stock

on demand

Lola Valves

Lola T-SVO 200 BD Nitrox left valve 3/4"

T-SVO 200 BD NITROX-L

214.75 €

Really robust valve with a design studied to facilitate handling in any environment, no matter how narrow or difficult, significantly increasing the user's speed of action and consequently general safety. It has two outlets, each activated by its own shut-off valve, in this way double outlets can be mounted on single cylinders, twin sets, supports for...

Fuera de Stock

on demand

Lola Valves

Lola T-SVO 200 BD Nitrox right valve 3/4"

T-SVO 200 BD NITROX-R

214.75 €

Fuera de Stock

Ask us about availability

Lola Valves

Lola T-SVO 200 Nitrox left valve

T-SVO 200 NITROX-L

179.00 €

Fuera de Stock

Ask us about availability

Lola Valves

Lola T-SVO 200 Nitrox right valve

T-SVO 200 NITROX-R

179.00 €

Fuera de Stock

on demand

Lola Valves

Lola T-SVO 300 BD Air Nitrox valve 3/4"

T-SVO 300 BD NITROX-L

214.75 €

Fuera de Stock

on demand

Lola Valves

Lola T-SVO 300 BD Nitrox right valve 3/4"

T-SVO 300 BD NITROX-R

214.75 €

Fuera de Stock

Ask us about availability

Lola Valves

Lola T-SVO 300 Nitrox left valve

T-SVO 300 NITROX-L

179.00 €

Fuera de Stock

Ask us about availability

Lola Valves

Lola T-SVO 300 Nitrox right valve

T-SVO 300 NITROX-R

179.00 €

Fuera de Stock

on demand

Lola Valves

Lola Valves Set T-SVO 200 BD Nitrox 3/4"

SET T-SVO 200 BD NITROX

411.89 €

Set of right and left speleo valve for tanks with 3/4'' NPSM thread 200Bar / 2900psi intended mainly for double assembly and SCR devices. Valves are oxygen clean (nitrox). The burst disc port is fitted with a plug. Really robust valve with a design studied to facilitate handling in any environment, no matter how narrow or difficult, significantly...

Fuera de Stock

on demand

Lola Valves

Lola Valves Set T-SVO 200 Nitrox

SET T-SVO 200 NITROX

344.00 €

Set of right and left speleo valve for tanks with M25 thread 200Bar / 2900psi intended mainly for double assembly and SCR devices. Valves are oxygen clean (nitrox). The burst disc port is fitted with a plug. Really robust valve with a design studied to facilitate handling in any environment, no matter how narrow or difficult, significantly increasing the...

Fuera de Stock

on demand

Lola Valves

Lola Valves Set T-SVO 300 BD Nitrox 3/4"

SET T-SVO 300 BD NITROX

411.89 €

Set of right and left speleo valve for tanks with 3/4'' NPSM thread 300Bar / 4350psi intended mainly for double assembly and SCR devices. Valves are oxygen clean (nitrox). The burst disc port is fitted with a plug. Really robust valve with a design studied to facilitate handling in any environment, no matter how narrow or difficult, significantly...

Fuera de Stock

on demand

Lola Valves

Lola Valves Set T-SVO 300 Nitrox

SET T-SVO 300 NITROX

344.00 €

Set of right and left speleo valve for tanks with M25 thread 300Bar / 4350psi intended mainly for double assembly and SCR devices. Valves are oxygen clean (nitrox). The burst disc port is fitted with a plug. Really robust valve with a design studied to facilitate handling in any environment, no matter how narrow or difficult, significantly increasing the...

Fuera de Stock

Ask us about availability

REELS, WETNOTES, BUOYS...

pad for wetnotes

DTD 3309

8.78 €

Fuera de Stock

On demand

TWIN TANKS

Twin tank Lola 2 x 12 Concave base

Lola2x12-flat

1,047.11 €

Twin set 2x12 Concave base assembled with Lola valves, BtS tank bands and Eurocylinders tanks

Fuera de Stock

Ask us about availability

DTD

wing for single RING 14 Lite

DTD 1005

200.79 €

Fuera de Stock

Out-of-Stock

STEEL HARDWARE

Backplate screw set M10

jdive1002

3.25 €

Set of steel screws for backplate in metric 10 composed of 2 hex head screws 24mm long and 2 wing nuts

View

Fuera de Stock

Out-of-Stock

STEEL HARDWARE

D-ring 25 mm.

DTD 3015

1.20 €

Stainless-steel D-ring for strap. Thickness 2 mm, width 25 mm.

View

Fuera de Stock

Out-of-Stock

DTD

DTD, backplate s-s 3 mm complete KIDDO

200.43 €

Small sized backplate to fit smaller backs, 5 cm shorter then our normal backplates. Fits together with our KIDDO wing and also with all other wing types. Stainless-steel backplate, thickness 3 mm, made of salt water resistant stainless-steel with edges bevelled on a NC cutter, manually polished for perfect flattening of sharp edges.

View

Fuera de Stock

On sale!
-23%

Out-of-Stock

DTD

DTD, Stream Lite 20

DTD 1103

164.18 € 213.22 €

Lightweight model of classic wing for doubles. The same double-shell construction but the cover is made of lighter material Cordura 1000. The inflator end-piece is made of high quality techno-polymer. Buoyancy is 200 N. Can be used with twin 2x12 l and stage.

View

Fuera de Stock

Out-of-Stock

Spare parts

inflator - screw outlet flange

DTD 3409

10.48 €

DTD, inflator - screw outlet flange Male thread to place the inflator elbow and the overpressure valve. Includes what is displayed in the image The thread pitch where we will attack the outside of the overpressure valve or elbow of the inflator is 51mmø and works with wings DTD, ATS, Golem, DUX, Dir Zone, Scuba Force and some Mares wings

View

Fuera de Stock

Out-of-Stock

COMPLEMENTS

Lola 171mm Twin Set SS bands

BS 171

142.80 €

Twin Set Tank Bands made of high-quality stainless steel material with a thickness of 1 mm. The width of the circles is 60 mm and they are tightened up with two M8 screws, which ensure a very solid connection of the bottles. The price is for 1 pair! To order we are able to make tank bands for bottles with Ø173mm, Ø176mm and Ø178mm.

View

Fuera de Stock

Out-of-Stock

Lola Valves

Lola T-SV 200 Air left valve

T-SV 200 L

139.67 €

View

Showing 169-192 of 199 item(s)

Product added to wishlist