DIVE GEAR

LIGHTING

Photo and Video

JACKETS

REGULATORS

BACKPLATES/WINGS

SUITS

Sidemount/Caving

Adjustable Fins

Foot Pocket Fins

MASK

COMPUTERS

REGULATOR HOSE (Rubber & Miflex)

CONTROL INSTRUMENTS

STEEL HARDWARE

DECO ESSENTIALS

REELS, WETNOTES, BUOYS...

Knifes & Cutters

BUNGEE MOUNTS/COMPASS

Sealing systems

DRYSUIT INFLATOR SYSTEMS

TANKS/VALVES

pee-valve, condoms, quick connec

Gas fills, analysis & decanting

ANALYZERS

ADAPTERS

Transport bags

Hygiene and Care

Weight

Tools

Face Mask

Miscellaneous

Compressors

Pre Owned

Scooters

Outlet

Lifting Balloons

Fuera de Stock

On demand, available in 48-72 hours

Boat Emergency Kits

Hookah with regulator 5m

LRS-HOK-0500

168.75 €

5 meters long Hookah with 1st and 2nd stage (full regulator) to carry out shallow emergency repairs, either on our boat or on the port pontoons. Perfect for untangling nets or lines from our propeller, undoing anchors, recovering fallen objects, etc...

En Stock

-s hose clamp for 7 l stage with protection

Available

DECO ESSENTIALS

hose clamp for 7 l stage with protection

DTD 3220

8.51 €

Stainless-steel hose clamp in hollow polyester cover with rubber protection of the lock.

En Stock

Available

DECO ESSENTIALS

Hose Retainer - (40 cuft)

SFSBS40s

4.88 €

En Stock

Available

DECO ESSENTIALS

Hose Retainer - (80 cuft/12L)

SFSBS80s

5.79 €

En Stock

Available

Computers Spare parts

HP Hose for wireless transmiter

jdivehptrans

20.66 €

HP phose 15 cm. with nipple included for Suunto, Mares, Aqualung and Shearwater wireless transmitters The use of the nipple (included together with the hose.) is essential for its correct operation NOTE: It is recommended not to manipulate high pressure equipment if you do not have minimal knowledge. Contact us if you have any questions about it for a...

En Stock

-20%

Available

RUBBER HIGH TECH

HP Hoses standard sizes

30.26 € 37.82 €

Fuera de Stock

http://www.xdeep.eu/sidemount-butt-plate-beaver-tail-pr-19.html

Out-of-Stock

Accessories

http://www.xdeep.eu/sidemount-butt-plate-beaver-tail-pr-19.html

HA-017-0

36.36 €

Xdeep Sidemount butt-plate

View

Fuera de Stock

Out-of-Stock

Heinrichs Weikamp

hw Backup

HWBACKLIGHT

159.48 €

Developed from scratch, the hw Backup is the "new one" in heinrichs weikamp's lamp rangeCompact, bright and reduced to the essential. Due to its extraordinary design, the hw Backup is extremely handy and robust For all those who are looking for a modern, compact backup lamp that does not apply to the harness. High quality materials, elaborate workmanship...

View

En Stock

Available

Spare parts

inflator - end-piece X01

DTD 3400

36.41 €

En Stock

inflator-knee-joint-with-screwed-fitting

Available

Spare parts

inflator - knee joint with screwed fitting

DTD 3406

10.21 €

DTD, inflator - knee joint with screwed fitting

En Stock

Available

Spare parts

inflator - safety valve 1,4 (OPV)

DTD 3407

10.28 €

DTD, inflator - safety valve 1,4 (OPV)

En Stock

Available

Spare parts

inflator - screw outlet flange

DTD 3409

10.48 €

DTD, inflator - screw outlet flange Male thread to place the inflator elbow and the overpressure valve. Includes what is displayed in the image The thread pitch where we will attack the outside of the overpressure valve or elbow of the inflator is 51mmø and works with wings DTD, ATS, Golem, DUX, Dir Zone, Scuba Force and some Mares wings

En Stock

Available

REGULATOR HOSE (Rubber & Miflex)

Inflator grip

SFBCHK

4.13 €

With the inflator grip is really easy operate the inflator terminal hose even with thick gloves.Easy to assembly and a real gain in security

En Stock

-20%

Available

RUBBER HIGH TECH

Inflator hose High Tech

30.93 € 38.66 €

Unlike the rest of the hoses available on the market, these use a tube of a single material, a single layer. This makes the terminals press on the tube (the area where they usually die, due to the creases of the pressing) do not produce creases between layers. This gives us 2 great advantages, the first, it will make longer his operating life. The second...

En Stock

Available

Tools and grease

Inflator valve tool (medium model)

jdive0026

3.30 €

This product is a tool for the removal and adjustment of the schrader valve within our inflator hoses. This assists in allowing you to remove and replace them as required during servicing. This is a useful tool for the experienced diver and service engineer; a simple and small tool engineered in metal for durability.Total tool length: 90mmHandle Length: 65mm

En Stock

Available

Spare parts

Inner coupling

A11918021

3.61 €

Male piece that goes inside the wing, which serves to anchor both the elbow system and the exhaust / drain valve. It is suitable for many wings of the market, for the most common brands such as, OMS prior to 2015, Halcyon old wings*, Edge*, Dive Rite*, Xdeep,* etc... Outer diameter: 49.2mm *NOTE: compatibility refers exclusively to the thread pitch

En Stock

Available

inner and outer gloves

Inner Glover Result Black

10.00 €

Key Features Pill resist fleece Extremely warm Elasticated wrists 200g/m2 Fleece 100% Polyester

En Stock

inicio

Inner Glover Result Red

10.00 €

Key Features Pill resist fleece Extremely warm Elasticated wrists 200g/m2 Fleece 100% Polyester

Fuera de Stock

Ask us about availability

TANKS & MORE...

Inox clamp with internal protection

9.90 €

Available in 5 sizes: For tanks up to 127 mmø (100 to 127mm) For tanks up to 152 mmø (127 to 152mm) For tanks up to 178 mmø (152 to 178mm) For tanks up to 203 mmø (178 to 203mm) For tanks up to 216 mmø (203 to 216mm) The protection come mounted to use the clamps in the described measurement ranges, however, the protection can be cut easily making the...

En Stock

Available 24-48h

Tools

Inox punch to remove gaskets

EHY 710005

8.26 €

High quality punch made of low resistance stainless steel.It is ideal for removing O-Rings more easily, especially those that are hard embedded. Dimensions and weights: Weight: 22.51g Total length: 126.5mm Wide part diameter: 5.8mm Punch part diameter: 1.8mm Punch part length 26.5mm

En Stock

Available

ADAPTERS

INT screw for Nitrox DIN valve

VLV-DIN-0002

4.12 €

Adapter from DIN to YOKE with standard thread G5/8" to convert standard valves with DIN 232 Bar connection to INT 232 Bar

En Stock

Available

ADAPTERS

INT to DIN Adapter

A16910601

37.82 €

INT to DIN adapter Adapter to connect the regulator with INT system to an output DIN300 (DIN300 male to INT)

Fuera de Stock

Integrated weight for Backplate (2 x 4,5kg)

Integrated weight for Backplate (2 x 4,5kg) 2

-20%

Out-of-Stock

Weight

Integrated weight for Backplate (2 x 4,5kg)

FSA002X5

204.96 € 256.20 €

Specific weight to mount to the back side of the backplate. Its weight is 4,5kg each side. The Backplate witch is visible at the photo IS NOT included

View

En Stock

Available

Hardware things...

IQ Lite screw (Nylon) 6 pieces

A11918074

6.72 €

Showing 1921-1944 of 4150 item(s)