DIVE GEAR

LIGHTING

JACKETS

REGULATORS

BACKPLATES/WINGS

SUITS

Sidemount/Caving

Adjustable Fins

Foot Pocket Fins

MASK

COMPUTERS

REGULATOR HOSE (Rubber & Miflex)

CONTROL INSTRUMENTS

DECO ESSENTIALS

REELS, WETNOTES, BUOYS...

Knifes & Cutters

BUNGEE MOUNTS/COMPASS

Sealing systems

DRYSUIT INFLATOR SYSTEMS

TANKS/VALVES

STEEL HARDWARE

pee-valve, condoms, quick connec

Gas fills, analysis & decanting

ANALYZERS

ADAPTERS

HEATING SYSTEMS

Transport bags

Hygiene and Care

Weight

Tools

Face Mask

Miscellaneous

Compressors

Pre Owned

Scooters

Outlet

En Stock

Available

ADAPTERS

2nd Stage Quick Connect-Disconnect system

SF2LADAP INFL

45.00 €

9/16" female adapter (second stage inlet) to standard jacket quick connect

En Stock

Available

ADAPTERS

2nd Stage Quick Disconnect system

SF S-03-4

39.99 €

En Stock

Available

REGULATOR ACCESORIES

9/16 male to 3/8 female

SFAD02

6.50 €

9/16" male to 3/8" female

Fuera de Stock

Ask us about availability

REGULATOR ACCESORIES

90º HP elbow connector

XS-HL403-90

16.00 €

Adapter elbow for HP connections. It has a 7/16 "female connection and a 7/16" male connector with nipple included

En Stock

Available

REGULATOR ACCESORIES

Adapter 1/2" a 3/8"

SFAD04

6.50 €

Adapter 1/2" a 3/8" male 1/2" to female 3/8"

En Stock

Available

ADAPTERS

Adapter 3/8" female to 9/16" female

DT331A

45.00 €

Female-female adapter 3/8" to 9/16" The photo shows both sides of the adapter for illustrative purposes only but ONLY one unit is included in the price.

En Stock

Available

REGULATOR ACCESORIES

Adapter from 9/16" to quick connect

XS-AC900

39.47 €

9/16 "connection adapter (regulator hose) to jacket-type quick connection Very practical to convert a regulator hose into a jacket hose.

En Stock

Available

STEEL HARDWARE

Bolt snap, stainless steel

6.20 €

Four sizes available: S: 64 mm length 16 mm ø approx. for the Eye and 11mm ø for the end ring M: 80 mm length 18 mm ø approx. for the Eye and 16mm ø for the end ring L: 92mm length 21 mm ø approx. for the Eye and 19mm ø for the end ring XL: 117 mm length 18 mm ø approx. for the Eye and 34mm ø for the end ring

En Stock

Boltsnap, coldwater boltsnap,stainless steel, 120mm

Available

STEEL HARDWARE

Boltsnap, coldwater boltsnap,stainless steel, 120mm

bs120

9.99 €

Boltsnaps, the fixing solution in technical diving. Whether to attach the primary regulator, the lamp, the backup lamp or the pressure gauge - always this carabiner is used for. The size is the way specified in the length and diameter of the eye. This boltsnap is perfect for cold water conditions. Stainless steell Length ca. 120 mm Diameter Eye ca. 33 mm

En Stock

-18%

Available

Spare parts-kits

Boquilla Mares Jax Termomoldeables

Boquilla Mares Jax

24.60 € 30.00 €

The Mares Jax Mouldable mouthpiece for your regulator are certainly not cheap but once fitted you will realise what you spent your money on! Designed by an actual orthodontist and allows you to mould your mouthpiece to your own individual mouth and teeth shape. Simply immerse JAX in boiling water for a few seconds and then clamp it between your teeth to...

Fuera de Stock

Boquilla Mares Jax Termomoldeables Junior

-20.8%

Ask us about availability

Spare parts-kits

Boquilla Mares Jax Termomoldeables Junior

415354

22.97 € 29.00 €

The famous mares Jax mouthpiece, now, in a smaller size!!! The Mares Jax Mouldable mouthpiece for your regulator are certainly not cheap but once fitted you will realise what you spent your money on! Designed by an actual orthodontist and allows you to mould your mouthpiece to your own individual mouth and teeth shape. Simply immerse JAX in boiling...

En Stock

-40%

Accessories

Butt Plate Sidemout - XR Line

417510

47.40 € 79.00 €

1200D “bulletproof” Ballistic Nylon Polyphrene hydro-drainage comfort padding 4 holes along the bottom allow for the mounting on any harness as well as adding accessories Provide the proper amount of rigidity to hold tanks in position and eliminate sag Two stainless steel 316 marine grade handles used for tank attachment

En Stock

Available

DECO ESSENTIALS

CORDURA TUBE

88135

3.50 €

En Stock

Available

STEEL HARDWARE

D-Rings Bent SS316 Mares XR Line

417526

3.94 €

Mares D-Ring Bent Stainless Steel 316

Fuera de Stock

Ask us about availability

Hardware

D-Rings FLAT SS316 Mares XR Line

417525

3.94 €

Mares D-RIng Flat 50mm wide

En Stock

Available

ADAPTERS

Elbow 110º for second stage

SFS014

26.00 €

Elbow 110º 9/16" connections

En Stock

Available

REGULATOR ACCESORIES

Elbow 3/8"

SFAE0113

24.20 €

Rotating elbow for connection to the first stage, male / female connections 3/8 "The elbow rotates and can be oriented where needed, rotates 360º

En Stock

Available

ADAPTERS

Female part quick connection system

SF S-03-4F

35.01 €

Female part of the big flow connection system. This part is similar to the ends of the standard inflation hoses, but with much robustness and much more gas flow, the needed for a great diver demand. It has a screw dial part that allows us to block the connection, while blocked it has not possible to disconnect. The hose connection is male 9/16 " (standard...

En Stock

Available

ADAPTERS

Female part quick connection system 3/8"

SF S-03-4F 3/8

35.00 €

En Stock

Available

REGULATOR ACCESORIES

First stage low profile over pressure valve

SFFSAC01

9.99 €

First stage low profile over pressure valve To install on a LP outlet of our first stages and so, prevent a over pressure situation on the complete loop.

En Stock

Available

REGULATOR ACCESORIES

Flow Stop HQ version

SF032DL

30.00 €

2nd Stage Shut with 9/16" male/female connections

En Stock

Available

Accessories

Harness cinch

SF-HARS-R

2.54 €

Standar 5cm wide harness cinch Price per meter

En Stock

Hebilla Aluminio de ajuste de arnés Mares

-19%

Available

Hardware

Hebilla Aluminio de ajuste de arnés Mares

417556

48.56 € 59.96 €

Safety aluminium buckle for adjusting the harness, allows us to adjust the harness and release the strap for easier entry and exit from the equipment. NOTE: THE PRICE IS FOR ONE BUCKLE. THE PHOTO SHOWS TWO UNITS WITH THE INTENTION SHOW IT IN OPEN AND CLOSED

En Stock

Available

DECO ESSENTIALS

Hose Retainer - (40 cuft)

SFSBS40s

5.90 €

En Stock

Available

DECO ESSENTIALS

Hose Retainer - (80 cuft/12L)

SFSBS80s

5.90 €

En Stock

Available

REGULATOR HOSE (Rubber & Miflex)

Inflator grip

SFBCHK

3.87 €

With the inflator grip is really easy operate the inflator terminal hose even with thick gloves.Easy to assembly and a real gain in security

En Stock

Available

Miscellaneous

Magnetic Connector

415804

29.95 €

The innovative magnetic securing system by Mares is the ultimate way to connect your diving accessories and equipment. Gone are the days of dangling hoses and lost dive lights. The Magnetic Connector is a versatile and unique system that includes many uses such as an octopus and console holder, torch/dive light hook, camera attachment, and much more!

En Stock

Available

REGULATOR ACCESORIES

male/male 9/16" to 3/8" adapter

SFADT028

8.80 €

En Stock

Available

Arrows & Cookies

Marcadores no direccionales Mares

15.34 €

Injection molded ABS Supplied in packs of 5 Made in ABS for durability Unique technical design with: Corners removed for ease of use, Line guiding curves and grooves, Holes for ring/identifier clipping, Dedicated surface for marking Used for orientation as a visual and tactile reference on a guideline

Fuera de Stock

-18%

Ask us about availability

Mares

Mares 2S first stage

Mares, primera etapa 2S

122.18 € 149.00 €

Simple and reliable, the 2S is the downstream piston first stage preferred by schools and diving centers. Celebrated for its easy maintenance and excellent performance.

Fuera de Stock

-25%

Ask us about availability

MASK

Mares Juno White Mask

Mares Máscara Juno Blanca

33.75 € 45.00 €

Frameless monolens mask Silicone skirt Same style as the jupiter but with a regular skirt fit Pivoting buckle on skirt Great field of vision

Fuera de Stock

-22%

Out-of-Stock

Mares

Mares 15X first stage

Mares, primera etapa 15X

186.42 € 239.00 €

The 15X first stage is suitable for any use. Pre-oriented ports, an ACT valve which guarantees reliability and safety and a DFC system for great performance at any depth!

View

Fuera de Stock

Ask us about availability

Spare parts-kits

Mares 18mm Allen wrench

46201441

9.90 €

18mm Allen wrench for disassembling the sealed chambers of some 1st stages, such as the 25XR and... It has measurements and weight of: 190mm x 90mm x 18mm 565g

En Stock

Available

Spare parts-kits

Mares 1st stage diaphragm ... 12 models

46185022

5.92 €

Main diaphragm for 1st stages MR22 Ruby, MR22 (2005), V32, V16, MR16, TI Planet, MR12, V12, MR12 Long, 12S, MR10, MR II

En Stock

Mares 1st stage diaphragm 82X, 75XR, 72X

Available

Spare parts-kits

Mares 1st stage diaphragm 82X, 75XR, 72X

46201429

3.99 €

Main diaphragm for 1st stages 82X, 75XR and 72x

En Stock

Available

Spare parts-kits

Mares 1st stage diaphragm MR22, 22Navy, 22X

46201111

5.45 €

Main diaphragm for 1st stages MR22 (2008), 22Navy, 22X

Showing 1-36 of 622 item(s)