DIVE GEAR

LIGHTING

JACKETS

REGULATORS

BACKPLATES/WINGS

SUITS

Sidemount/Caving

Adjustable Fins

Foot Pocket Fins

MASK

COMPUTERS

REGULATOR HOSE (Rubber & Miflex)

CONTROL INSTRUMENTS

DECO ESSENTIALS

REELS, WETNOTES, BUOYS...

Knifes & Cutters

BUNGEE MOUNTS/COMPASS

Sealing systems

DRYSUIT INFLATOR SYSTEMS

TANKS/VALVES

STEEL HARDWARE

pee-valve, condoms, quick connec

Gas fills, analysis & decanting

ANALYZERS

ADAPTERS

HEATING SYSTEMS

Transport bags

Hygiene and Care

Weight

Tools

Face Mask

Miscellaneous

Compressors

Pre Owned

Scooters

Outlet

En Stock

Available

STEEL HARDWARE

aluminium whistle red

DTD 3311

2.10 €

Aluminium whistle red

En Stock

Available

Arrows & Cookies

Arrow large

DTD 3109

0.67 €

arrow large Large arrow for cavedivers, length is 87 mm, width 57 mm.

En Stock

Available

Arrows & Cookies

Arrow Red large

DTD 3112

0.67 €

Red arrow large Large arrow for cavedivers, length is 85 mm, width 53 mm.

En Stock

Available

Arrows & Cookies

Arrow Red small

DTD 3119

0.58 €

Red arrow small Small arrow for cavedivers, useful for marking line, etc. Length is 65 mm, width 40 mm.

En Stock

Available

Arrows & Cookies

Arrow small

DTD 3108

0.58 €

arrow small Small arrow for cavedivers, useful for marking line, etc. Length is 65 mm, width 40 mm.

Fuera de Stock

Ask us about availability

DTD

backplate s-s 3 mm complete QUICK-FIX

250.73 € 263.93 €

Stainless-steel backplate, thickness 3 mm, made of salt water resistant stainless-steel with edges bevelled on a NC cutter, manually polished for perfect flattening of sharp edges. It is not possible to take the new QUICK-FIX stainless-steel buckles apart, it is not openable. You can only adjust the harness by pulling the stra

En Stock

Available

STEEL HARDWARE

belt stop serrated SS

DTD 3017

1.57 €

En Stock

Available

Arrows & Cookies

Big Blue arrow

DTD 3120

0.67 €

Large arrow for cavedivers, length is 85 mm, width 53 mm.

En Stock

Available

Arrows & Cookies

Blue Cookie, 55mm ø

DTD-3121

1.16 €

Non-directive round line marker - COOKIE, for marking important places, diameter 55 mm, thickness 3 mm. Colour blue.

En Stock

Available

Arrows & Cookies

Blue REM

DTD 3122

0.67 €

Rectangular line marker - REM (Reference Exit Marker), length 65 mm, width 40 mm, thickness 3 mm. Colour blue.

En Stock

Available

Arrows & Cookies

Blue small arrow

DTD 3118

0.58 €

Small trinagular ARROW for cavedivers, useful for marking line, etc. Length 64 mm, width 40 mm, thickness 3 mm. Colour blue.

En Stock

Available

STEEL HARDWARE

Buckle for adjustable harness, s-s

DTD 3005

9.46 €

En Stock

Available

Arrows & Cookies

Cookie large

DTD 3110

0.67 €

Cookie large 55mm ø

En Stock

Available

Arrows & Cookies

Cookie large Red

DTD 3114

0.67 €

Cookie large Red 55mm ø

En Stock

Arrows & Cookies

Cookie small Red

nonstockcookiered

1.16 €

Cookie small Red 38mm ø

Fuera de Stock

On demand

Spare parts

copy of Halcyon Zero Gravity Inner bladder (with upgrade kit)

14080100 ZG

145.20 €

Halcyon Zero Gravity Wing Inner Bladder Replacement NOTE: Old wing bladders are no longer available. In order to replace the bladder on older Halcyon wings the thread upgrade kit is required as the new thread screws have changed. This product includes everything needed to update threads. The bladder includes and installs the males for mounting the elbow...

En Stock

Available

Spare parts

copy of Service Kit for X01 end Inflator

DTD 3429

36.30 €

Box with 10 services for the J01 end inflator used in DTD end inflators and in others brands... Picture could not match with the right kit...

En Stock

Available

Spare parts

Corrugated hose 340 mm DIR

DTD 3421

24.20 €

340mm corrugated windpipe much softer than other standard ones. This allows it to better adapt to the necessary curves it takes on the way from the wing elbow to the inflator end.

En Stock

Available

STEEL HARDWARE

D-ring 25 mm.

3015

1.45 €

Stainless-steel D-ring for strap. Thickness 2 mm, width 25 mm.

En Stock

Available

STEEL HARDWARE

D-Ring 50mm Flat

DTD 3011

2.75 €

Made of marine grade steel, 316L Ring thread: 4.8mmø Interior width in the widest areas: 55mm x 42mm

En Stock

Available

STEEL HARDWARE

d-ring welded on triglide

DTD 3014

5.40 €

Fuera de Stock

Out-of-Stock

inicio

Dive Rite 1,5-inch crotch strap with clip closure

DR-BC1056-1.5

10.00 €

Preferred by most divers for its general comfort, the 1,5-inch crotch strap is ideal for fastening a harness and backplate securely to a diver's body. By using a crotch strap, divers can reduce the likelihood of their gear slipping upwards on the body in the water, resulting in the tank hitting the back of the head during a dive. Nylon webbing provides...

View

Fuera de Stock

Ask us about availability

Dive Rite

Dive Rite 1-inch crotch strap with clip closure

DR-BC1056D

10.00 €

Preferred by most divers for its general comfort, the 1-inch crotch strap is ideal for fastening a harness and backplate securely to a diver's body. By using a crotch strap, divers can reduce the likelihood of their gear slipping upwards on the body in the water, resulting in the tank hitting the back of the head during a dive. Nylon webbing provides...

En Stock

Available

REGULATOR ACCESORIES

Dive Rite 110º elbow fr second stage

DR-RG1355

32.67 €

110º elbow for hose enry to the second stage.

En Stock

inicio

Dive Rite 120" finger Spool

DR-RE4620

27.49 €

New Dive Rite Spool, more ergonomic, comfortable and easy to handle. The outer face is no longer flat, it has now been given a concave shape to offer a much higher grip, even when wearing thick gloves.

Fuera de Stock

Ask us about availability

Reels & Spools

Dive Rite Cookie Spool

DR-RE4030

19.00 €

A compact, finger spool at only 2.3 inches (5.8 cm) with 30 feet (9.1 m) of #24 braided line, the Cookie Spool packs easily into a pocket and deploys with ease to gap a line. Uniquely only to the Cookie Spool, it attaches and locks to the line quickly with notches on the spool that are similar to the notches on a line arrow or line cookie. The notches...

Fuera de Stock

-15%

Ask us about availability

Stage/Bailout regulators

Dive Rite O2 Deco

DR-RG5400-BAR

238.66 € 280.78 €

Fuera de Stock

-11%

Ask us about availability

inicio

Dive Rite Rec EXP Wing 16"

DR-BC4300-16

385.10 € 432.70 €

A hybrid 45lbs wing, the Rec Series can be worn on single or double tanks making it one of our most popular wings. When diving single tanks, our Gusset Control System streamlines the wing, keeping it close to the body.

Fuera de Stock

Ask us about availability

Reels & Spools

Dive Rite Sidewinder Explorer 297m Reel

DR-RE51900

202.70 €

Less likely to entangle than other reels on the market. The side-handle style of the reel lent itself to exploration because it could easily switch from hand to hand while laying out line. Our Sidewinder series of reels are designed to be anti-jam by using precision machine tolerances between the frame and the spool making it nearly impossible for the...

Fuera de Stock

-11%

Ask us about availability

Dive Rite

Dive Rite Travel EXP 12L (with elbow)

DR-BC4100-E-16

312.12 € 350.69 €

A lightweight wing designed for single-tank, warm water diving, our Travel series of wings are small-profile and ideal for travel and divers who wear a minimal amount of weight. At 25lbs/11.3 kg of lift, the Travel can accommodate one 80ft3/12 L tank with no more than 16lbs. of additional weight.

Fuera de Stock

-11%

Ask us about availability

Alas

Dive Rite Travel EXP 12L (with valve)

DR-BC4100-16

312.12 € 350.69 €

Fuera de Stock

Ask us about availability

Dive Rite

Dive Rite Voyager EXP (with elbow)

DR-BC4700-E-16

366.71 € 398.60 €

The Voyager Series wings, donut-shaped air cells for single-tank diving, provide divers essential buoyancy control. With 35 lbs. (15.8 kg) of lift, streamlined side panels, and their minimalist, oval shape, the wings’ design provides maximum comfort throughout the dive with no squeezing or restrictions

Fuera de Stock

Ask us about availability

Dive Rite

Dive Rite Voyager EXP (with valve)

DR-BC4700-16

366.16 € 398.01 €

Fuera de Stock

Product available with different options

Adjustable Fins

Dive Rite XT Fins Black

178.00 €

Sometimes it's best not to mess with a tried-and-true original. The XT Fin uses the original monoprene blend from the 1990's, and is the best choice for divers looking for a high performance blade. Identical in shape to our former fin, the XT brings us back to the original monoprene blend that has been proven and successful for over 20 years

View

En Stock

-30%

Adjustable Fins

Dive Rite XT Fins Blue

124.25 € 177.49 €

En Stock

Adjustable Fins

Dive Rite XT Fins Red

178.00 €

Fuera de Stock

Ask us about availability

DTD

DTD Stream twin tank wing 15 / 20 / 25

303.87 €

En Stock

Harness & Backplates

DTD 1l argon bottle straps (6 cft)

34.27 €

Two options available, S and M size: S size: For mounting a small argon bottle with circumference 250 - 280 mm (diam. 80 - 90 mm = 3,13 - 3,51 inches) directly on a backplate. Comes in pair (2 pieces). M Size: For mounting an argon bottle with circumference 330 - 360 mm (diam. 105 - 115 mm = 4,13 - 4,51 inch) directly on a backplate. Comes in a pair (2...

En Stock

-15%

REELS, WETNOTES, BUOYS...

DTD 200m line Reel

DTD 3100

148.31 € 174.48 €

En Stock

-15%

Available

REELS, WETNOTES, BUOYS...

DTD 60mts reel with line

DTD 3102

103.02 € 121.21 €

Reel with a classic shape, manufactured from durable delrin. Delrin is used more and more often for manufacturing of diving equipment as its tensile properties, mechanical ruggedness and minimal absorbability.

Fuera de Stock

Ask us about availability

DTD

DTD ADJUSTABLE Harness

DTD 2101

90.92 €

En Stock

Available

Harness & Backplates

DTD argon bottle straps 14 cft

DTD 2108

48.28 €

For tightening the bigger (1,5 - 2argon bottle straps 14 cftl) argon bottle to the double tanks. Comes in pair (2 pieces).

En Stock

Available

Harness & Backplates

DTD argon bottle straps 14 cft (unit)

DTD 2108-1

25.00 €

For tightening the bigger (1,5 - 2l argon bottle straps 14 cftl) argon bottle to the double tanks. Comes in 1 piece

Fuera de Stock

Ask us about availability

Harness & Backplates

DTD Backplate 6mm

DTD 3001

240.56 €

Stainless-steel backplate 6 mm made of salt water resistant stainless-steel. Edges bevelled on a NC cutter, manually polised for perfect flattening of sharp edges, which could dilacerate the strap.

Fuera de Stock

Out-of-Stock

Accesories / Weight

DTD BACKPLATE BALLAST

DTD 2000

91.52 € 96.34 €

View

En Stock

Available

Accesories / Weight

DTD BELT POCKET

DTD 2203

31.22 €

Fuera de Stock

DTD Bottle strap with s-s buckle (short)

Ask us about availability

DTD

DTD Bottle strap with s-s buckle (short)

DTD 2113

28.35 €

Indestructible buckle, HDPE pad, protecting the bottle from scratching, strap made from non-elongation material. Stitched on a strip of antislip rubber. Only works with tanks of max. 171mmø After having tried a multitude straps of this type, we dare to say that this is undoubtedly the best bottle holder strap that we have ever tried.

En Stock

bottle-strap-with-stainless-steel-buckle

Available

COMPLEMENTS

DTD bottle strap with stainless-steel buckle

DTD 2106

28.35 €

Indestructible buckle, HDPE pad, protecting the bottle from scratching, strap made from non-elongation material. Stitched on a strip of antislip rubber. After having tried a multitude straps of this type, we dare to say that this is undoubtedly the best bottle holder strap that we have ever tried.

Fuera de Stock

Ask us about availability

DTD

DTD buoy pocket

37.29 €

En Stock

ACCESSORIES

DTD calf wraps

55.40 €

Tightening calf wraps reduce inflation of diving suit at calf and foot part while swimming in an appropriate position (with legs slightly above the body). Material Cordura 1100, elastic ribbon 100 mm, velcro. - size M - circumference of the wrap, no stretching applied - 38 cm (15 inches)- size L - circumference of the wrap, no stretching applied - 43 cm...

En Stock

Available

Spare parts

DTD Corrugated hose

24.20 €

Corrugated Hose Corrugated Hose in three differents sizes: option 1: 380mm Option 2: 400mm Option 3: 600mm These hoses work with these brands: DTD, ATS, Golem, DUX, Dir Zone.

En Stock

Available

DTD

DTD Crotch strap with D-rings

DTD 2104

16.58 €

Polypropylene strap with integrated D-ring and one loose D-ring and stopper.

Fuera de Stock

-10%

Ask us about availability

Complete Wings

DTD DIAMOND

462.24 € 513.60 €

Fuera de Stock

Ask us about availability

DTD

DTD DIR Harness + SS backplate

216.98 €

Complete Backplate/harness set Aluminuml backplate, thickness 3 with PA harness, stainless-steel D-rings and stoppers, stainless-steel buckle, crotch strap, buoy pocket and pocket with knife. Choose between the different color options of buoy storage

Fuera de Stock

Ask us about availability

DTD

DTD DIR Harness + SS backplate 3-6mm

230.39 € 242.52 €

Complete Backplate/harness set Stainless-steel backplate, thickness 3 or 6mm with PA harness, stainless-steel D-rings and stoppers, stainless-steel buckle, crotch strap, buoy pocket and pocket with knife. Choose between the different color options of buoy storage

Fuera de Stock

Ask us about availability

DTD

DTD HARNESS

DTD 2100

66.84 €

HARNESS DTD The package includes: - 4m strap with hole - knife with sheet - stainless-steel buckle - rubber band (4x narrow, 1x wide) - crotch strap with one integrated D-ring - 2x D-ring bend - 2x D-ring normal - 5x belt stoppers

En Stock

Available

Spare parts

DTD Inflator - end-piece J01

DTD 3422

44.06 €

The J01 Raw power has an improved piston-based system, highly sensitive and gradual, specifically designed for technical/professional use and addressing the needs of technical diving where compliance with the highest standards is a must.

En Stock

Spare parts

DTD inflator end piece X01K

DTD 3401

39.03 €

En Stock

Accesories / Weight

DTD Inner pocket spare part

15.90 €

En Stock

Available

Tools

DTD J01 Inflator maintenance kit

DTD 3428

94.56 €

Essential tool kit for the correct maintenance of model J01 inflator controls, used in some of the DTD wings and some other brands Includes semi-round nose pliers cone for loading button O-Ring bush wrench, lubricant 5-mm Allen wrench 8-mm Allen wrench set of O-rings for 10 services

Fuera de Stock

Ask us about availability

DTD

DTD KIDDO complete

428.59 €

En Stock

Available

Spare parts

DTD knee joint with screwed fitting Inflator low profile

DTD 3423

17.48 €

DTD, inflator - knee joint with screwed fitting low profile

Fuera de Stock

Out-of-Stock

CONTROL INSTRUMENTS

DTD O2 GAUGE

DTD 3302

62.16 €

Pressure gauge OXYGEN 300 bar Pressure gauge OXYGEN 300 bar diameter 52 mm, brass body, tempered glass

View

En Stock

Available

Spare parts

DTD OPV Inflator - safety valve 1,2 (OPV - low profile)

DTD 3424

12.43 €

New generation DTD wings overpressure valve outer part, not suitable for wings with standard OPV

Fuera de Stock

Ask us about availability

DTD

DTD PA webbing 50 mm - 4 m

DTD 2105

17.00 €

Special-made, hard, very resistant strap for backplate with a grommet for a screw.

Fuera de Stock

Out-of-Stock

CONTROL INSTRUMENTS

DTD Pressure gauge

DTD 3301

62.16 €

Brass pressure gauge, tempered glass, 200 bar High-quality brass pressure gauge, suitable especially for main tanks. Synoptic dial scale upto 300 bar (working pressure 200 bar). Includes an axis for attachment on a standard hose.

View

Fuera de Stock

Ask us about availability

DTD

DTD QUICK-FIX Harness

DTD 2111

90.92 €

En Stock

REELS, WETNOTES, BUOYS...

DTD Reel 120m line

DTD 3101

147.40 €

En Stock

Available

DTD

DTD Ring 12

250.60 €

Lightweight ring model wing for juniors, volume 12 litres. Double-shell construction but the cover is made of lighter material Cordura 1000 red colour. Inflator end-piece is SHARK which is more suitable for smaller hands, softer to press the buttons . Part of the wing are also 2 pieces of rubber pins in the middle area of wing which allow to attach the...

Fuera de Stock

Ask us about availability

DTD

DTD RING 14/17/20

252.04 €

Circular style wing for diving with a single tank. Comes out from time proven double layer model CUB. Use for single tank 12 - 18 l. Part of the wing are also 2 pieces of rubber pins in the middle area of wing which allow to attach the single bottle WITHOUT the need to use single tank adapter.

En Stock

Available

DTD

DTD Ring Col, 14, 17

252.04 €

Fuera de Stock

Ask us about availability

DTD

DTD Ring Stripe 14 / 17

252.04 €

Circular style wing for diving with a single tank. Comes out from time proven double layer model CUB. Use for single tank 12 l. Part of the wing are also 2 pieces of rubber pins in the middle area of wing which allow to attach the single bottle WITHOUT the need to use single tank adapter.INCLUDED in delivery- 1x inflator LP hose 51 cm- 1x screw set for...

Fuera de Stock

DTD Set twin tank, Stream 15 / 20 / 25 2

Ask us about availability

DTD

DTD Set twin tank, Stream 15 / 20 / 25

479.06 €

DTD twin tank set consisting of the Stream 15, 20 or 25 wing, DIR type continuous harness and steel backplate in 3mmChoose your combination from the drop-down menus.

En Stock

Available

Accessories

DTD shoulder pads - pair

DTD 2215

14.04 €

shoulder pads - pairComfortable shoulder pads

Fuera de Stock

Out-of-Stock

DTD

DTD SIDEMOUNT BACK PAD

DTD 2206

43.14 €

sidemount back padAdditional rear part of backplate for attaching the sidemount bottles.

View

Fuera de Stock

On demand

Harness & Backplates

DTD sidemount harness

DTD 2102

154.80 €

En Stock

Available

inicio

DTD Single tank adapter

DTD 3003

57.20 €

Fuera de Stock

Ask us about availability

DTD

DTD SS backplate 3 mm with adjustable harness

250.73 € 263.93 €

Stainless-steel backplate, thickness 3 or 6 mm Stainless Steel or 3mm aluminium, made of salt water resistant metal with edges bevelled on a NC cutter, manually polished for perfect flattening of sharp edges.

En Stock

Available

DECO ESSENTIALS

DTD STAGE RIGGING KIT

34.84 €

DTD stage rigging kit Three options, choose the one needed at the dropdown menu: Option 1: For 7 liters tanks Option 2: For S040 tanks Option 3: For S080 tanks

En Stock

Available

STEEL HARDWARE

DTD stainless-steel belt buckle

DTD 3004

9.87 €

stainless-steel belt buckle High-quality stainless-steel buckle.

En Stock

Available

STEEL HARDWARE

DTD stainless-steel bolt-snap

6.80 €

DTD Bolt-snap in two sizes: Stainless-steel bolt-snap small for backup torches and small things attaching to a loop in pocket, etc. Length is 75 mm, the eye is 9 mm wide. And Stainless-steel bolt-snap for pressure gauge, long hose, etc. The eye is 20 mm wide The other bolt-snap is 114mm long and 40mm wide for the eye.

En Stock

dtd-stainless-steel-double-end-snap-long

Available

STEEL HARDWARE

DTD stainless-steel double end snap long

9.33 €

Stainless-steel double end snap Stainless-steel double end snap, all-round use for fastening various equipment, overall length 100 mm or 120mm

Fuera de Stock

Ask us about availability

DTD

DTD Stream CCR wing

299.00 €

This wing is especilly designed for diving with CCR rebreathers. buoyancy: 150N, 200 N or 250N material: cover Cordura 2000, high-frequency welded inner tube Cordura 560 with PU seam coating, zip YKK weight: 1,47 kg

Fuera de Stock

Ask us about availability

Wings

DTD Stream Ring 17

DTD 1116

314.25 €

Circular style wing for diving with doubles. STREAM RING 17 was designed for diving with double tanks from 2x7-2x8 and stage. Due to the small profile, along with sufficient lift, this wing is especially suitable for recreational and also tec diving.

Fuera de Stock

Ask us about availability

DTD

DTD STREAM RING 20 col. RED Wing

315.85 €

Circular style wing for diving with doubles. STREAM RING 20 was designed for diving with double tanks from 2x7-2x12 and stage. Due to the small profile, along with sufficient lift, this wing is especially suitable for recreational and also tec diving. weight: 1.22 kgmaterial: cover Cordura 1000, high-frequency welded inner tube Cordura 560 with PU seam...

Fuera de Stock

Ask us about availability

DTD

DTD Stream RIng CCR 20 wing

DTD 1202

299.00 €

Circular wing is especilly designed for diving with CCR rebreathers.Height of empty wing = 65 cm, width = 70 cm. buoyancy: 200 N material: cover Cordura 2000, high-frequency welded inner tube Cordura 560 with PU seam coating, zip YKK weight: 1,42

Fuera de Stock

Ask us about availability

DTD

DTD Stream Ring Lite 20

DTD 1106

298.51 €

Del ya conocido modelo Stream Ring, este otro en versión ligera. Cordura 1000 para el saco exterior y 560 para la vejiga interna. 20 litros de capacidad perfectos para bibotellas de 2x12 y etapas.

Fuera de Stock

Ask us about availability

DTD

DTD Stream Ring Twin Tank Wing 20, 23

315.85 €

En Stock

Available

Accesories / Weight

DTD Trim pocket

DTD 2005

10.99 €

En Stock

Available

DTD

DTD Trim pockets for backplate

DTD 2006

14.99 €

Small pockets for attachment to the backplate. Each pocket can carry one piece of weight block (dimensions 8x10x3 cm, 1,5-2 kg).Price is for 1 unit

Fuera de Stock

DTD twin tank set, Stream Ring 20 / 23 2

On sale!

Ask us about availability

DTD

DTD twin tank set, Stream Ring 20 / 23

490.05 €

DTD twin tank set consisting of the Stream Ring 20 or 23 wing, DIR type continuous harness and 3mm SS backplate.Choose your color combination from the drop-down menus.

Fuera de Stock

Ask us about availability

DTD

DTD twin tank Set, Stream Ring Col

489.93 €

DTD twin tank set consisting of the Stream Ring Col wing, DIR type continuous belt harness and steel backplate in 3 mmChoose your wing color from the drop-down menus.

Fuera de Stock

DTD twin tanks Set, Stream Ring Stripe 2

Ask us about availability

DTD

DTD twin tanks Set, Stream Ring Stripe

489.99 €

DTD twin tank set consisting of the Stream Ring Stripe wing, DIR type continuous belt harness and steel backplate in 3 mm thick Choose your color wing from the drop-down menus.

En Stock

Available

DTD

DTD Weight belt with s-s buckle

DTD 2023

14.62 €

Polypropylene strap 1,5 m with integrated stainless-steel buckle.

En Stock

Available

DTD

DTD Weight inner pocket DOWN-DROP

13.90 €

This is the spare part for the dropdown weight pocket system. There are 2 options: Big:: can carry 2 pcs of standard sized 1,5-2 kg lead blocks. Small: can carry one piece of standard sized 1,5-2 kg lead block.

En Stock

Available

DTD

DTD weighting system DOWN-DROP

79.42 € 83.60 €

Ballast system consists of 2 pockets, which are slipped on a waist strap and fastened to a backplate. Left pocket has a D-ring for mounting a pressure gauge. Inside each pocket is an inner pocket with a handle for inserting the weights. Especially suitable for slim people, and if you need to save some space on your waist strap.

En Stock

DTD Weighting system for single bottle 2

Available

DTD

DTD Weighting system for single bottle

DTD 2001

91.19 €

Ballast system consists of 2 pockets, which are slipped on bottle straps, they include inner throw-away pockets for 2x 3 kg weights. material: Cordura 1100, velcro weight: 0,44

En Stock

Available

Tools

DTD Wings valves tool

DTD 3430

7.26 €

Tool for disassembling and tightening the NEW extra flat overpressure valves and elbows of the DTD wings

En Stock

Available

Tools

DTD X01 end inflators tool

DTD 3431

18.15 €

Tool for disassembling and tightening the NEW extra flat overpressure valves and elbows of the DTD wings

En Stock

Available

Tools

DTD X01 Inflator maintenance Tool kit

DTD 3415

94.56 €

Fuera de Stock

-11%

Ask us about availability

DTD

DTD, Aluminium 3mm Backplate

DTD 3002

115.58 € 129.87 €

Dural backplate made of aluminium alloy resistant to salt water. Backplate is hard anodized. Edges bevelled on a NC cutter. Thanks to low weight of 0,75 kg it is ideal for travelling by plane.

Fuera de Stock

DTD, Aluminium single tank Ring 14-17-20 Set

Ask us about availability

Complete Gear

DTD, Aluminium single tank Ring 14-17-20 Set

483.00 €

Single Tank Set DTD Ring 14-17-20 This set consisting of DTD Ring 14 wing, 3mm aluminium backplate with continuous webbing harness and double DTD tank holder straps.

En Stock

Available

DTD

DTD, Backplate Aluminium 3 mm SHORT

DTD 3033

129.87 €

Dural backplate made of aluminium alloy resistant to salt water. Backplate is hard anodized. Edges bevelled on a NC cutter. Thanks to low weight of 0,59 kg it is ideal for travelling by plane.ould dilacerate the strap.Length: 355 mmWidth: 238 mmWeight: 0,59 kgPitch between middle holes: 280 mm (11 inches)

Fuera de Stock

Out-of-Stock

DTD

DTD, backplate s-s 3 mm complete KIDDO

230.39 € 242.52 €

Small sized backplate to fit smaller backs, 5 cm shorter then our normal backplates. Fits together with our KIDDO wing and also with all other wing types. Stainless-steel backplate, thickness 3 mm, made of salt water resistant stainless-steel with edges bevelled on a NC cutter, manually polished for perfect flattening of sharp edges.

View

En Stock

Available

Accesories / Weight

DTD, Bolsillo adicional

DTD 2204

28.24 €

En Stock

Available

COMPLEMENTS

DTD, bottle strap with plastic buckle

DTD 2107

18.36 €

DTD bottle strap with high quality plastic buckle. Composed of a strap with a perfect balance between hardness and perfect malleability, a plastic buckle and a ring made of AISI 316 stainless steel. The strap has an anti-slip band on the inside to provide an extra grip. After having tried a multitude straps of this type, we dare to say that this is...

Fuera de Stock

Ask us about availability

DTD

DTD, DIAMOND WING

900.12 €

DIAMOND shaped wing and complete harness. Developed and tested by Czech best cave divers, used during our explorations on Yucatan, where we have 64 km long UW system - 4th longest on the world! 2 sizes - 10 (M) and 13 litres (L). Material: Cordura 1000, high-frequency welded inner tube Cordura 560 with PU seam coating, zip RiRi, stainless-steel AISI...

En Stock

Available

Knifes & Cutters

DTD, Line cutter pocket

DTD 2208

9.99 €

Pocket from polyamide strap.

En Stock

Available

Knifes & Cutters

DTD, pocket with knife

DTD 2207

13.00 €

Pocket from polyamide strap, stainless-steel knife with jagged blade (50 mm).

Fuera de Stock

Out-of-Stock

DTD

DTD, Short SS Backplate

DTD 3031

141.19 €

Stainless-steel backplate 3 mm made of salt water resistant stainless-steel. Edges bevelled on a NC cutter, manually polised for perfect flattening of sharp edges, which could dilacerate the strap.It is 43 mm shorter and 25 mm narrower than normal size backplate, suitable for not so big people :-)

View

Fuera de Stock

-11%

Out-of-Stock

DTD

DTD, SS 3mm Backplate

DTD 3000

125.66 € 141.19 €

Stainless-steel backplate 3 mm made of salt water resistant stainless-steel. Edges bevelled on a NC cutter, manually polised for perfect flattening of sharp edges, which could dilacerate the strap.

View

Fuera de Stock

Ask us about availability

DTD

DTD, SS Ring 14 Lite single tank

1800-1005-2x2107

499.00 €

Single Tank Set DTD Ring 14 Lite This set consisting of DTD Ring 14 wing, 3mm stainless steel backplate with continuous webbing harness and double DTD tank holder straps.

Fuera de Stock

Ask us about availability

Complete Gear

DTD, SS single tank Ring 14-17-20 Set

509.00 €

Single Tank Set DTD Ring 14-17-20 This set consisting of DTD Ring 14 wing, 3mm stainless steel backplate with continuous webbing harness and double DTD tank holder straps.

Fuera de Stock

On sale!
-23%

Out-of-Stock

DTD

DTD, Stream Lite 20

DTD 1103

198.66 € 258.00 €

Lightweight model of classic wing for doubles. The same double-shell construction but the cover is made of lighter material Cordura 1000. The inflator end-piece is made of high quality techno-polymer. Buoyancy is 200 N. Can be used with twin 2x12 l and stage.

View

En Stock

Available

ACCESSORIES

DTD, thigh pocket

DTD 2201

32.15 €

A pocket suitable for sticking on a diving suit, velcro closure. Made for carrying a spare mask, reel, buoy or a snack. Dimensions 29x19x6 cm. material: Cordura 1100, neoprene, velcro weight: 0,14 kg

En Stock

Available

ACCESSORIES

DTD, thigh pocket low profile

DTD 2202

30.81 €

A pocket suitable for sticking on a diving suit, velcro closure. Made for carrying a wetnotes. Dimensions 29x19x4 cm. material: Cordura 1100, neoprene, velcro weight: 0,14 kg

Fuera de Stock

Ask us about availability

DTD

DTDSTREAM RING 20 stripe Wing

315.85 €

Circular style wing for diving with doubles. STREAM RING 20 was designed for diving with double tanks from 2x7-2x12 and stage. Due to the small profile, along with sufficient lift, this wing is especially suitable for recreational and also tec diving. weight: 1.22 kg material: cover Cordura 1000, high-frequency welded inner tube Cordura 560 with PU seam...

En Stock

Spare parts

External screw outlet flange

DTD 0000

6.05 €

DTD, inflator - screw outlet flange Female thread to place/fit the inflator elbow Works with wings DTD, ATS, Golem, DUX, Dir Zone, Scuba Force and some Mares wings

En Stock

Available

STEEL HARDWARE

Extra wide ladder ring

DTD 3026

9.15 €

Ring to mount on the belt as shown in the photo. Its measures are: Totals: 53 x 90mm Internal measurement of the useful part: 43 x 23mm NOTE: The price is for only one unit. The double photo is by way of illustration.

En Stock

Available

REELS, WETNOTES, BUOYS...

Hacyon Pathfinder 800

30010800

296.45 €

Fuera de Stock

On demand

Halcyon

Halcyon Evolve MC System Custom

985.76 €

You can chose from many colors for the Front, Back, Gusset and different logocolors of all Different Halcyon Wings. Delivery time about 4-6 weeks DOWNLOAD HERE THE ORDER FORM

En Stock

Available

Halcyon

Halcyon 10-lb (4,4kg) ACB replacement pocket

12110011

48.28 €

Replacement pocket for Halcyon 10lbs Active Control Ballast.

En Stock

-30%

Available

REELS, WETNOTES, BUOYS...

Halcyon 100cm oral inflator buoy

90.86 € 129.80 €

Closed buoy with lockable oral inflatorPerfect for signaling in our ascents or stops. Given its small volume, it is very easy and fast to inflate.Its measurements are: 100cm high x 12cm wideMade of 200 denier nylon, very balanced between strength and low weight and volume, perfect to accommodate the buoy easily.

Fuera de Stock

On demand

Chargers and batteries

Halcyon 12v 4amp NiMH charger, Explorer/EOS LED

25.400.124

267.41 €

The HALCYON 12 volt 4 Amp NiMH Charger is a highly efficient charging solution for NiMH batteries. It features an input voltage of 115v/230v, making it versatile and able to be used in both North America and Europe. Equipped with the Explorer/EOS LED 135 Charger system, users can easily monitor the charging progress and ensure their batteries are fully...

En Stock

HALCYON

Halcyon 1st Stage H-75P

65101175

417.45 €

Halcyon's H-75P offers many refined features that ensure consistent delivery with performance that ranks among the very best in diving industry. The stable, intermediate pressure provides precise delivery of air to the second stage. This means you will experience a remarkable ease of breathing while diving in all environments; this is true at nearly any...

Fuera de Stock

On demand

Chargers and batteries

Halcyon 24v 4amp NiMH charger, Apollo

25.015.024

341.22 €

The HALCYON 24 volt 4 Amp NiMH Charger is a highly efficient charging solution for NiMH batteries. It features an input voltage of 115v/230v, making it versatile and able to be used in both North America and Europe. Users can easily monitor the charging progress and ensure their batteries are fully charged. This charger is compatible with many different...

En Stock

Halcyon 6' SLIM Closed Alert Marker SMB 2

-30%

Available

REELS, WETNOTES, BUOYS...

Halcyon 6' SLIM Closed Alert Marker SMB

126.20 € 180.29 €

A slimmer version of Halcyon's Super Big Diver's Alert Marker - but still 6' (1.8m) long and with Halcyon’s patented No-Lock LP® connector. About half the circumference of the original Super Big but the same height, this SMB packs nice and neat in a pocket, offers a lower profile during storage and easily inflates at depth.

Fuera de Stock

Ask us about availability

Halcyon

Halcyon 6-lb (2,7kg) ACB replacement pocket

12110016

48.28 €

The HALCYON 6-lb (27kg) ACB Replacement Pocket New Style With Handle is a premium-quality, heavy-duty accessory designed specifically for scuba diving enthusiasts. This pocket is designed to replace the existing pockets on your BCD (Buoyancy Control Device) jacket, providing you with additional space to carry your diving gear and accessories. The new...

En Stock

Available

Spare parts

Halcyon 90-Degree Elbow for Wing

14.070.014

17.77 €

Halcyon Elbow (Wing/Corrugated Hose) suitable for all Halcyon Wings.The elbow is the connection between the wing and the corrugated hose.Halcyon Elbow (Wing/Corrugated Hose)- Connection between wing und corrugated hose- Suitable for all Halcyon wings- 90 degree elbow- Scope of delivery: elbow, union nut with thread, gasket

Fuera de Stock

On sale!

Out-of-Stock

Halcyon

Halcyon Active Control Ballast System

12100010

119.79 €

10 lbs (4.5 kg) Active Control Ballast System, 5 lbs (2.25 kg) per side. Side release buckle prevents accidental weight loss and allows the diver or dive buddy to quickly release and/or replace part or all of their ballast as the need requires. Ideal for traveling diver

View

Fuera de Stock

Halcyon Active Control Ballast System (colors option)

Halcyon Active Control Ballast System (colors option) 2

-30%

Out-of-Stock

Weights, STA, straps, etc...

Halcyon Active Control Ballast System (colors option)

105.00 € 150.00 €

View

En Stock

STEEL HARDWARE

Halcyon Adjustable Crotch Strap with Front & Rear D-Rings

10050003

48.40 €

Replaces or Adds to any Halcyon Secure Harness System (or any other harness brand). Keeps the BC unit Secure on the Diver in any Position

Fuera de Stock

Ask us about availability

Halcyon

Halcyon Adventure MC

1,248.50 €

Fuera de Stock

Ask us about availability

Halcyon

Halcyon Adventure PRO BC System

1,259.50 €

Fuera de Stock

Ask us about availability

HALCYON

Halcyon AURA 2nd stage

65101250

216.59 €

Aura second stage regulators provide a simple, compact design that makes breathing under water feel completely natural.

Fuera de Stock

Ask us about availability

HALCYON

Halcyon AURA 2nd stage maintenance kit

65100003

26.62 €

The maintenance kit contains all the O-rings as well as the parts to be replaced (piston seat, membranes, etc ...) that correspond to each model. NOTE: the image may not exactly match the product, it is shown only for illustration.

Fuera de Stock

Ask us about availability

Halcyon

halcyon backplate + Adjust cinch

506.99 €

En Stock

Available

Halcyon

HALCYON BACKPLATE AND HARNESS

369.05 €

Fuera de Stock

Ask us about availability

Harness & Backplates

Halcyon Backplates

248.05 €

Fuera de Stock

On demand

Chargers and batteries

Halcyon Battery Packs

353.32 €

Replacement battery packs for Halcyon lights. Choose the appropriate one for your model from the drop-down menu according to the list below. If you have any doubts-questions, contact us. Item nº1: 13.5 amp NiMH battery pack + tray, for Explorer 13.5 Item nº2: 9 amp NiMH battery pack+tray, for Explorer 9 Item nº3: 4.5 amp NiMH battery pack+tray for...

En Stock

-30%

Available

REELS, WETNOTES, BUOYS...

Halcyon Big Buoy 140cm bottom DAM

77.77 € 111.10 €

Big capacity and high resistance open bottom buoy.The fabrics used by Halcyon in the manufacture of its buoys resist for a long time the harsh treatment to which these elements of our dive gear are subjected, guaranteeing us a long useful life, both in their lifting-lift role, due to the hardness and resistance of the fabric, as a marker visible from long...

Fuera de Stock

Halcyon Carbon Fiber Backplate + Harness

Ask us about availability

Halcyon

Halcyon Carbon Fiber Pro + Harness

555.39 €

The carbon fiber backplate is a very welcome announcement from technical diving company Halcyon. This new backplate is significantly lighter than contemporary backplates, with a solid carbon fiber construction that doesn’t compromise on strength. Where a standard backplate might weigh six pounds for a steel model, or five pounds for an aluminum version,...

Fuera de Stock

Ask us about availability

Backplates & harness...

Halcyon Carbon Fiber Pro Backplate

453.75 €

These new backplates is significantly lighter than contemporary backplates, with a solid carbon fiber construction that doesn’t compromise on strength. Where a standard backplate might weigh six pounds for a steel model, or five pounds for an aluminum version, the new Halcyon carbon fiber backplate clocks in at just around two pounds. This new backplate...

Fuera de Stock

On demand

Chargers and batteries

Halcyon Cargador Flare/Focus corded

25.013.326

169.40 €

Charger for Flare and Focus battery, models with umbilical NOTE: the image may not exactly match the product.

Fuera de Stock

On demand

Chargers and batteries

Halcyon Cargador Flare/Focus Handheld

25.013.426

93.17 €

Charger for Flare and Focus handheld models NOTE: the image may not exactly match the product.

Fuera de Stock

On demand

Spare parts

Halcyon CCR 35 Inner bladder (new version)

10000923 Coa

110.11 €

Halcyon CCR 35 Wing Inner Bladder Replacement The bladder includes and installs the males for mounting the elbow and the overpressure/drain valve, both males are the ones with the new thread pitch, contact us if you need the old thread pitches and we will supply you the upgrade kit NOTE: The picture could not match with the real product...

Fuera de Stock

On demand

Spare parts

Halcyon CCR 35 Inner bladder (with upgrade kit)

14080100 CCR 35

145.20 €

Halcyon CCR 35 Wing Inner Bladder Replacement NOTE: Old wing bladders are no longer available. In order to replace the bladder on older Halcyon wings the thread upgrade kit is required as the new thread screws have changed. This product includes everything needed to update threads. The bladder includes and installs the males for mounting the elbow and the...

En Stock

Available

DECO ESSENTIALS

Halcyon clamp with cordura cover

12.00 €

Steel clamps protected with Halcyon cordura tube.Halcyon uses the highest quality steel to make the clamps. This makes them much more durable than other clamps available on the market and therefore, safer. Available in 3 sizes: S040 7 liters S080 Choose the necessary one from the drop-down menu.

En Stock

Available

Reels & Spools

Halcyon Cold water screw for Pathfinder Reels

30040003

12.10 €

Stainless steel screw for Halcyon Pathfinder reels.

Fuera de Stock

On demand

Spare parts

Halcyon Contour Inner bladder (new version)

14080050 Coa

110.11 €

Halcyon Contour Wing Inner Bladder Replacement The bladder includes and installs the males for mounting the elbow and the overpressure/drain valve, both males are the ones with the new thread pitch, contact us if you need the old thread pitches and we will supply you the upgrade kit NOTE: The picture could not match with the real product...

Fuera de Stock

On demand

Spare parts

Halcyon Contour Inner bladder (with upgrade kit)

14080100 Con

145.20 €

Halcyon Contour Wing Inner Bladder Replacement NOTE: Old wing bladders are no longer available. In order to replace the bladder on older Halcyon wings the thread upgrade kit is required as the new thread screws have changed. This product includes everything needed to update threads. The bladder includes and installs the males for mounting the elbow and...

Fuera de Stock

On demand

Spare parts

Halcyon Contour S Inner bladder (new version)

14080051 Coa

110.11 €

Halcyon Contour S Wing Inner Bladder Replacement The bladder includes and installs the males for mounting the elbow and the overpressure/drain valve, both males are the ones with the new thread pitch, contact us if you need the old thread pitches and we will supply you the upgrade kit NOTE: The picture could not match with the real product...

Fuera de Stock

On demand

Spare parts

Halcyon Contour S Inner bladder (with upgrade kit)

14080100 Con S

145.20 €

Halcyon Contour S Wing Inner Bladder Replacement NOTE: Old wing bladders are no longer available. In order to replace the bladder on older Halcyon wings the thread upgrade kit is required as the new thread screws have changed. This product includes everything needed to update threads. The bladder includes and installs the males for mounting the elbow and...

Fuera de Stock

On sale!
-12%

On demand

Complete Wings

Halcyon Contour SM

819.90 € 931.70 €

En Stock

Available

Weights, STA, straps, etc...

Halcyon Convertible Weight Insert

10111006

141.57 €

Attaches securely to Halcyon single-tank BC Systems Stainless Steel channel with two secure tank straps with SS cam buckles Octogrip tank protector reduces wear on cylinder Halcyon bolt retainer to keep STA bolt in place Optional epoxy-coated 6-lb. (2.7-kg.) weight is easily removed for travel or when less weight is required. Removable weight is...

Fuera de Stock

Ask us about availability

Halcyon

Halcyon Custom Wings

664.29 €

Do you want a fully custom wing? halcyon gives you the option. Use the downloadable order form and customize your Halcyon wing to make it unique and totally the way you want it !!! Choose the type of wing from the drop-down menu and complete the order with the downloadable order form DOWNLOAD THE ORDER FORM HERE

Fuera de Stock

Ask us about availability

Reels & Spools

Halcyon Defender Pro 200

30040200

163.35 €

Halcyon is pleased to announce the new Halcyon Defender Pro 200. This unique guideline device combines the powerful utility of the Halcyon Pathfinder¸ reel with the elegant simplicity and unique portability of the Halcyon Defender Pro¸ series of spools. The Defender Pro 200 can rapidly be converted from a Pathfinder style reel to a Defender Pro style...

En Stock

Reels & Spools

Halcyon Defender Pro Safety

54.45 €

The Halcyon Defender Pro Safety Spool guideline from Halcyon Manufacturing is well known for guideline device innovations, having pioneered some of the most unique designs in recreational, cave and technical diving. Now they are pleased to announce the dawn of a new generation of guideline devices. Available in there line lengths: 100, 150 and 200 feet

Fuera de Stock

Ask us about availability

Halcyon

Halcyon Deluxe Confo Pads

130.90 €

En Stock

halcyon-diver-alert-marker-100cm-closed-circuit

halcyon-diver-alert-marker-100cm-closed-circuit 2

-30%

Available

REELS, WETNOTES, BUOYS...

HALCYON Diver Alert Marker (100cm) closed circuit

93.17 € 133.10 €

Halcyon Diver Alert Markers Halcyon Diver Alert Markers provide maximum visibility and redundant flotation to support diving safety and peace of mind. Marker buoys are essential safety equipment in the event of separation from the dive team or surface vessel.

En Stock

halcyon-diver-alert-marker-130cm-closed-circuit

halcyon-diver-alert-marker-130cm-closed-circuit 2

-30%

Available

REELS, WETNOTES, BUOYS...

HALCYON Diver Alert Marker 130cm closed circuit

117.73 € 168.19 €

Fuera de Stock

halcyon-diver-alert-marker-closed-circuit-180cm

halcyon-diver-alert-marker-closed-circuit-180cm 2

-30%

Ask us about availability

REELS, WETNOTES, BUOYS...

Halcyon Diver Alert Marker closed circuit 180cm

134.67 € 192.39 €

Fuera de Stock

Ask us about availability

Halcyon

HALCYON ECLIPSE 20, 30 & 40lbs

627.99 €

The Halcyon Eclipse buoyancy compensator is establishing a new standard for single-tank diving while creating unprecedented streamlining and eliminating the many useless “features” that clutter traditional buoyancy compensator

Fuera de Stock

On demand

Spare parts

Halcyon Eclipse Inner bladder (new version)

110.11 €

Halcyon Eclipse Wing Inner Bladder Replacement The bladder includes and installs the males for mounting the elbow and the overpressure/drain valve, both males are the ones with the new thread pitch, contact us if you need the old thread pitches and we will supply you the upgrade kit

En Stock

Available

Spare parts

Halcyon Eclipse Inner bladder (with upgrade kit)

145.20 €

Halcyon Eclipse Wing Inner Bladder Replacement NOTE: Old wing bladders are no longer available. In order to replace the bladder on older Halcyon wings the thread upgrade kit is required as the new thread screws have changed. This product includes everything needed to update threads. The bladder includes and installs the males for mounting the elbow and...

Fuera de Stock

Halcyon Eclipse MC System 20/30/40lbs Aluminium

Ask us about availability

Halcyon

Halcyon Eclipse MC System 20/30/40lbs Aluminium

1,063.59 €

The quintessential single tank wing kit and object of desire for every diver. Simple, robust and adjusted to your needs and preferences. Backplate available in two sizes, standard and small, the latter especially suitable for girls / women of short height This is the version with an Aluminium Backplate, being able to add additional ballast specially...

En Stock

Available

Halcyon

Halcyon Eclipse MC System 20/30/40lbs SS

1,063.59 €

The quintessential single tank wing kit and object of desire for every diver. Simple, robust and adjusted to your needs and preferences. Backplate available in two sizes, standard and small, the latter especially suitable for girls / women of short height This is the version with a Stainless Steel backplate, being able to add additional ballast specially...

Fuera de Stock

On demand

Halcyon

Halcyon Eclipse MC System Custom

1,016.76 €

Create your own Halcyon Custom Infinity MC System! You can chose from many colors for the Front, Back, Gusset and different logocolors of all Different Halcyon Wings. Delivery time about 4-6 weeks download here the order form

Fuera de Stock

Ask us about availability

Halcyon

HALCYON EVOLVE 40 & 60lbs

627.99 €

The Halcyon Evolve maintains a novel, industry first-design; this unique circular wing provides unprecedented control, allowing divers to easily fine tune their buoyancy regardless of diving position.

Fuera de Stock

On demand

Spare parts

Halcyon Evolve Inner bladder (new version)

110.11 €

Halcyon Evolve Wing Inner Bladder Replacement The bladder includes and installs the males for mounting the elbow and the overpressure/drain valve, both males are the ones with the new thread pitch, contact us if you need the old thread pitches and we will supply you the upgrade kit

Fuera de Stock

On demand

Spare parts

Halcyon Evolve Inner bladder (with upgrade kit)

145.20 €

Halcyon Evolve Wing Inner Bladder Replacement NOTE: Old wing bladders are no longer available. In order to replace the bladder on older Halcyon wings the thread upgrade kit is required as the new thread screws have changed. This product includes everything needed to update threads. The bladder includes and installs the males for mounting the elbow and the...

Fuera de Stock

Ask us about availability

Halcyon

Halcyon Evolve JJ-CCR Wing

10400045

627.99 €

Designed for use with rebreathers with back-mounted counterlungs requiring more lift and a wider profile. This wing is based on the proven Evolve design while incorporating unique changes to facilitate comfort and functionality. It has two openings are for better hose guidance as well as a special cut. The cover is made of 1000 Cordura. The buoyancy of...

Fuera de Stock

Ask us about availability

Halcyon

Halcyon Evolve System 40/60lb Aluminium

1,028.50 €

A system welcomed and used by extreme divers from all over the world, its reliability, quality of materials used to make it and simplicity, make it the most coveted equipment for twin tanks on the market.This is the version with an Aluminium backplate, being able to choose between two backplate measurements and opt for the classic DIR type harness or the...

Fuera de Stock

Ask us about availability

Halcyon

Halcyon Evolve System 40/60lb SS

1,028.50 €

A system welcomed and used by extreme divers from all over the world, its reliability, quality of materials used to make it and simplicity, make it the most coveted equipment for twin tanks on the market.This is the version with a Stainless Steel backplate, being able to choose between two backplate measurements and opt for the classic DIR type harness or...

En Stock

Available

Accessories

Halcyon Exploration Goodman handle

104.06 €

Halcyon goodman handle specially designed to be able to use the Scooter at the same time as the focus in a comfortable and practical way.This handle is perfect for the Halcyon Flare and Focus lights, but it is also perfectly adaptable to almost any other light on the market. It incorporates the Tekna mini knife and is available in two versions. M:...

Fuera de Stock

-20%

Out-of-Stock

Halcyon

HALCYON EXPLORER 40 & 55lbs

476.08 € 595.10 €

View

Fuera de Stock

On demand

Spare parts

Halcyon Explorer Inner bladder (new version)

110.11 €

Halcyon Explorer Wing Inner Bladder Replacement To use with the 70lb one, choose the Option 55lb The bladder includes and installs the males for mounting the elbow and the overpressure/drain valve, both males are the ones with the new thread pitch, contact us if you need the old thread pitches and we will supply you the upgrade kit

Fuera de Stock

On demand

Spare parts

Halcyon Explorer Inner bladder (with upgrade kit)

145.20 €

Halcyon Explorer Wing Inner Bladder Replacement NOTE: Old wing bladders are no longer available. In order to replace the bladder on older Halcyon wings the thread upgrade kit is required as the new thread screws have changed. This product includes everything needed to update threads. The bladder includes and installs the males for mounting the elbow and...

Fuera de Stock

Ask us about availability

Knifes & Cutters

HALCYON EXPLORER KNIFE

102.85 €

Fuera de Stock

Ask us about availability

Halcyon

Halcyon Explorer MC System

990.00 €

The Halcyon Explorer carries a time-honored tradition; in fact, its rugged construction is the foundation for an entire lineage of Halcyon buoyancy compensators.

Fuera de Stock

On demand

Halcyon

Halcyon Explorer MC System Custom

944.76 €

En Stock

Available

Spare Parts

Halcyon Flare & Focus Switch Slide Assembly

20001089

59.27 €

Fuera de Stock

Ask us about availability

Main Focus and Backup lights

Halcyon Flare Handheld

1,315.60 €

the new bench mark in hand held primary dive li

Fuera de Stock

Ask us about availability

Main Focus and Backup lights

Halcyon Flare Led (complete)

1,320.00 €

After 3 years of development, Halcyon is setting the standard for primary dive lights, again

En Stock

Available

Main Focus and Backup lights

Halcyon Focus 2.0

1,995.29 €

Halcyon set the standard for primary dive lights with the first and most popular Focus light with 5 to 15 hrs burn time and now offers the Focus 2.0 as the latest breakthrough in lighting technology. Nad now, the Focus 2 has 3 to 5.5 hrs burntime and the most incredible, twice the brightness of the original Focus torc

Fuera de Stock

Ask us about availability

Main Focus and Backup lights

Halcyon Focus 2.0 Handheld

1,657.00 €

En Stock

Available

Spare Parts

Halcyon Focus and Flare Cap

99000011

27.77 €

En Stock

Halcyon Focus/Flare Knob and screw assembly

Halcyon Focus/Flare Knob and screw assembly 2

Available

Spare Parts

Halcyon Focus/Flare Knob and screw assembly

20001055

9.68 €

Fuera de Stock

Ask us about availability

HALCYON

Halcyon H-50D 1ST stage maintenance kit

65100000

38.72 €

The maintenance kit contains all the O-rings as well as the parts to be replaced (piston-valve, seat, membranes, etc ...) that correspond to each model. NOTE: the image may not exactly match the product, it is shown only for illustration.

Fuera de Stock

Ask us about availability

HALCYON

Halcyon H-50D double tank regulator set

65002011

1,627.45 €

Componentes of the Halcyon H-50 double tank set: 2 units of Halcyon H-50 1st stage Halcyon HALO 2nd main stage (with 210cm or 150cm hose) Halcyon AURA 2nd secondary stage H (with 56cm or 60cm hose) Halcyon pressure gauge (with 60cm or 65cm hose)(metric scale. if you need imperial ones, let us know it) 2 bolt-snap Neck lace for secondary regulador...

Fuera de Stock

Ask us about availability

HALCYON

Halcyon H-50D Sidemount Set

65002007

1,845.25 €

The H-50D Halcyon Sidemount Regulator Package comes as a complete set with 2 Halcyon SPG, 2 Halcyon Halo 2nd stages and 2 Halcyon H-50D 1st stages. And of course, all hoses you need for sidemount configulation, all you need to add are the tanks and some of water...

Fuera de Stock

Ask us about availability

HALCYON

Halcyon H-50D single cylinder regulator set

65002005

1,191.69 € 1,281.39 €

Componentes of the Halcyon H-50 single tank set: Halcyon H-50 1st stage Halcyon HALO 2nd main stage (with 210cm or 150cm hose) Halcyon AURA 2nd secondary stage H (with 56cm or 60cm hose)(metric scale. if you need imperial ones, let us know it) Halcyon pressure gauge (with 60cm or 65cm hose) 2 bolt-snap Neck lace for secondary regulador Regulator Bag...

En Stock

Available

HALCYON

Halcyon H-75P 1ST stage maintenance kit

65100001

32.67 €

Fuera de Stock

Ask us about availability

HALCYON

Halcyon H-75P double tank regulator set

65002010

1,869.45 €

Componentes of the Halcyon H-75P double tank set: 2 units of Halcyon H-75 1st stage 2 units of Halcyon HALO 2nd main stage (with 210cm or 150cm hose and 56cm or 60cm) Halcyon pressure gauge (with 60cm or 65cm hose)(metric scale. if you need imperial ones, let us know it) 2 bolt-snap Neck lace for secondary regulador Regulator Bag included Bench...

Fuera de Stock

Ask us about availability

HALCYON

Halcyon H-75P O2 clean 1ST stage maintenance kit

65100004

43.56 €

Fuera de Stock

Ask us about availability

HALCYON

Halcyon H-75P single cylinder regulator set

65002004

1,464.10 €

Componentes of the Halcyon H-75P single tank set: Halcyon H-75 1st stage Halcyon HALO 2nd main stage (with 210cm or 150cm hose) Halcyon AURA 2nd secondary stage H (with 56cm or 60cm hose)(metric scale. if you need imperial ones, let us know it) Halcyon pressure gauge (with 60cm or 65cm hose) 2 bolt-snap Neck lace for secondary regulador Regulator Bag...

Fuera de Stock

Ask us about availability

HALCYON

Halcyon H75P sidemount package

65002006

1,984.40 €

The Halcyon Sidemount Regulator Package comes as a complete set with 2 Halcyon SPG, 2 Halcyon Halo 2nd stages and 2 Halcyon H-75P 1st stages. And of course, all hoses you need for sidemount configulation, all you need to add are the tanks and some of water...

Fuera de Stock

Ask us about availability

Service kits and O-Rings

Halcyon HALO 2n stage service kit

65100002

26.62 €

Fuera de Stock

Ask us about availability

Complete gear

Halcyon Infinity Aluminium

990.00 €

The Halcyon Infinity is not your typical buoyancy compensator. In fact, it establishes a new standard in single-tank diving, offering the unparalleled performance of a back mounted harness and the easy adjustability of a jacket BC.

Fuera de Stock

Halcyon Infinity Aluminium with weighted STA

Halcyon Infinity Aluminium with weighted STA 2

Ask us about availability

Complete single gear

Halcyon Infinity Aluminium with weighted STA

1,030.00 €

Fuera de Stock

On demand

Halcyon

Halcyon Infinity Custom

10511030-custom

1,129.75 €

Fuera de Stock

Ask us about availability

Halcyon

Halcyon Infinity SS with weighted STA

1,349.15 €

Fuera de Stock

Ask us about availability

Complete gear

Halcyon Infinity Stainless Steel

990.00 €

En Stock

Available

Halcyon

Halcyon Infinty Upgrade Harness

10500000

163.35 €

Fuera de Stock

Out-of-Stock

Main Focus and Backup lights

HALCYON LED HP SCOUT

284.35 €

View

Fuera de Stock

Ask us about availability

MASK

Halcyon Low-Profile Dual Lens Mask

42040001

95.59 €

Dual lens mask fits a wide variety of divers. Wide vision and low volume. High-quality silicone components and tempered glass.

En Stock

Available

Spare Parts

Halcyon Magnet for Focus and Flare Switch

20001022

31.46 €

New version of the Halcyon Focus and Flare fcocos switch magnet, with the inner magnet isolated to prevent degradation

En Stock

On sale!

Available

MASK

Halcyon Mask Strap LOGO

36.30 €

En Stock

-30%

CONTROL INSTRUMENTS

Halcyon mini SPG

61030005

76.23 € 108.90 €

Halcyon Stage SPG, 0 - 400 bar (including swivel, without HP hose)

En Stock

Available

inicio

Halcyon Multi Tool

127.05 €

The versatility of Halcyon's Titanium Multi-tool allows you to accomplish numerous tasks with one device. SPECS: Multi-tool with 8 different functions Titanium blade Knife edge Serrated edge Line cutter Two hex heads 3 different size Allen keys Blue H sheath included

Fuera de Stock

Out-of-Stock

DECO ESSENTIALS

Halcyon Nylon Tube

10000080

8.97 €

Cordura tube to protect the steel clamps used in stage or bailout tanks, rebreather tanks, etc... the price is for meter

View

Fuera de Stock

Out-of-Stock

Spare parts

Halcyon OEM Power inflator

14060102

42.35 €

Halcyon 45º inflator end. Fits most BCDs on the market that require a 1in inner diameter corrugated hose. Also has a steel pin for BCDs that use a pull to dump feature. Sleek streamlined design replacement power inflator for your BC compatible with most 1″ corrugated hoses

View

Fuera de Stock

-22.2%

Out-of-Stock

REELS, WETNOTES, BUOYS...

Halcyon Pathfinder 1200

30010120

258.88 € 332.75 €

View

Fuera de Stock

Out-of-Stock

REELS, WETNOTES, BUOYS...

Halcyon Pathfinder 3500

30010350.DIS

0.00 €

View

En Stock

Available

REELS, WETNOTES, BUOYS...

Halcyon Pathfinder 400

30010400

254.10 €

Fuera de Stock

-10%

Ask us about availability

pee-valve, condoms, quick connec

Halcyon Pee-Valve

40040003

206.91 € 229.90 €

En Stock

Available

DECO ESSENTIALS

Halcyon Rigging Kit

71.39 €

Halcyon Stage Rigging Kit includes everything you need to add a simple & Effective Cylinder Attachment System to a Stage or Decompression Bottle Available in three sizes, for S080, 7 liters or S040, choose the one you need in the dropdown menu:

Fuera de Stock

Ask us about availability

MASK

Halcyon single lens mask

42.040.000

77.00 €

En Stock

Available

Halcyon

Halcyon single tank adapter

10111002

87.12 €

Halcyon single tank adapter with screws kit included

En Stock

Available

Halcyon

Halcyon single tank adapter

216.59 €

Fuera de Stock

-30%

Out-of-Stock

CONTROL INSTRUMENTS

Halcyon SPG 52mm

99000001

87.78 € 125.40 €

Halcyon presure gauge  Clean for O2 gauge52mm diameterHardened mineral crystalSphere luminescentFinished nickel

View

Fuera de Stock

-30%

Out-of-Stock

CONTROL INSTRUMENTS

Halcyon SPG, 63mm ø

61030007

88.94 € 127.05 €

Halcyon pressure gauges are reliable and accurate. Designed for pressures beyond 400BAR, and constructed with high-quality materials, the highly visible, luminescent face makes this a favorite among divers in all environments. Calibrated for BAR (0-400) Nickel-plated brass with mineral glass lens 60mm x 24mm 260gr

View

En Stock

-10%

Available

Adjustable Fins

Halcyon Spring Heels for Jetfin-style Fins

54.45 € 60.50 €

These legendary Halcyon Stainless Steel Spring Straps (Spring Heels) fulfill a common desire for a fin straps that are flexible yet remain secure and resistant to breaking. By eliminating all the failures common to plastic connections, divers are freed from the risk and hassle of lost fins and broken straps. Designed to fit Jetfin-style rubber fins. Now...

En Stock

Halcyon Stainless Steel Halycon weight belt buckle

Available

Spare parts

Halcyon Stainless Steel Halycon weight belt buckle

62040010

26.62 €

En Stock

Available

Halcyon

Halcyon Storage Pak

95.59 €

halcyon storage pak MC Storage Pak for BackplateBolts and nuts included

En Stock

Available

MASK

Halcyon strap cover

22.51 € 24.20 €

Halcyon strap cover

En Stock

Available

Halcyon

Halcyon Super Cam Buckle, Stainless Steel

10051010

62.92 €

Our innovative cam provides a vise-like grip while the vinyl Octogrip protects against damage. Key Features of the Super Cam Buckle Replaces plastic cam buckles without the expense of buying a new tank strap Solid stainless steel, tumbled and polished to perfection Vinyl OctoGrip pad protects tank against metal-to-metal damage is available separately...

En Stock

Available

Gloves

Halcyon Tech Gloves

60.50 €

Protect your hands while diving with Halcyon’s Tech Gloves. Features: - 2mm neoprene gloves made from recycled materials - Fingerless gloves for ease of dexterity - Pocket on top of hand to place markers - Packaged in hanging kraft-material boxes made from recycled materials

Fuera de Stock

Ask us about availability

Accessories

Halcyon Tekna Mini Knife Kit

22.060.103

31.00 €

This is the Tekna knife that comes in the "Exploration" spotlight handle

Fuera de Stock

Ask us about availability

Halcyon

Halcyon Traveler

10600000

748.00 €

En Stock

Available

Backplates & harness...

Halcyon Traveler Crotch Strap

10050013

45.77 €

Replaces or Adds to any Halcyon Secure Harness System (or any other harness brand). Keeps the BC unit Secure on the Diver in any Position

Fuera de Stock

On demand

Halcyon

Halcyon Traveler PRO Custom

10600030-custom

1,016.76 €

Fuera de Stock

Ask us about availability

Halcyon

Halcyon Traveller PRO

1,039.50 €

En Stock

Available

Halcyon

Halcyon Traveller Pro wing

596.59 € 627.99 €

Born from the well-known Halcyon Eclipse single tank wing, the Halcyon Traveler Pro has been designed adding the slots to be able pass the straps through it and holding the backplate in order to be able in this way use it without the single tank adapter (STA). This is special important when we need to have a gear wing as lighter as possible.

En Stock

Available

COMPLEMENTS

Halcyon V-weight pouch

12400010

48.40 €

Fuera de Stock

Ask us about availability

Regulator bags

Halcyon Voyager Case

44010005

102.85 €

With the Halcyon Voyager Case regulator bag you will be able, easily, carry a set of double's regs plus a stage reg or two. This durable design can also support two single tank reg systems for the traveling couple.

En Stock

Available

Halcyon

HALCYON WEBBING KIT

87.12 €

En Stock

Available

Accessories

Halcyon Webbing Replacement

30.25 €

Halcyon Webbing Replacement Webbing replacement for Secure Harness (no hardware) Halcyon's own webbing has enough rigidity to make a comfortable fit for the diver, whether male or female and is affordable enough to allow for regular maintanence and replacement of old webbings. This kit comes on its own, as a single piece of webbing, without any hardware....

En Stock

-25%

REELS, WETNOTES, BUOYS...

Halcyon Wetnotes Colors

51.75 € 68.99 €

Halcyon Wetnotes Colors, limited edition Halcyon launches a limited edition of Wetnotes in some new funny and/or distinctive colors. Great idea for all those who want to give a touch of color and distinction to this piece of our equipment. Available in Aqua Blue, Blue, Red, Pink and Camu. Do not left your opportunity to get the yours, there will...

Fuera de Stock

Ask us about availability

Halcyon

Halcyon Zero Gravity

10114034

797.39 €

Halcyon's New Sidemount Sytem. The Zero Gravity, Great for Traveling, Exploration & for the all around Diver. From Starting out with AL 80's to Cave Exploration, this System a Great Addition to your Dive Locker

Fuera de Stock

On demand

Spare parts

Halcyon Zero Gravity Inner bladder (new version)

14080032 Coa

110.11 €

Halcyon Zero Gravity Wing Inner Bladder Replacement The bladder includes and installs the males for mounting the elbow and the overpressure/drain valve, both males are the ones with the new thread pitch, contact us if you need the old thread pitches and we will supply you the upgrade kit NOTE: The picture could not match with the real product...

En Stock

Available

HALCYON

Halcyon, 2º stage HALO (2019) with 102cm hose

65101275

348.48 €

Breathing underwater should feel natural, and that experience is one of the things that most clearly separate Halcyon second stages from our competitors. As soon as you experience the smooth, high volume of air delivered by a Halcyon second stage, you will be hooked. Our high quality second stage regulators provide diver adjustable controls for the...

Fuera de Stock

Out-of-Stock

Arrows & Cookies

Halcyon, cookie 44mm

24310216

2.50 €

Halcyon, cookie 44mm x 3,5mm

View

En Stock

Available

HALCYON

Halcyon, H-50D first stage

65101150

302.50 €

The H-50D is a high performance diaphragm design that is fully sealed and purpose-built for harsh conditions, such as ice or environmentally contaminated environments. Diaphragm first stages are historically popular with cold water divers, and the H-50D was engineered for extreme conditions. Go dive extraordinary places with your H-50D, and be confident...

Fuera de Stock

Ask us about availability

MASK

Halcyon, H-View Mask

42040004

107.69 €

The Halcyon View Mask is a new frameless mask with superior wide field of view through cleared tempered glass. The soft, silicone, frameless body provides superior fit and comfort and it is less susceptible to damage. The H-View also features a double face seal on the mask skirt which means it is less likely to cause leak

En Stock

-s hose clamp for 7 l stage with protection

Available

DECO ESSENTIALS

hose clamp for 7 l stage with protection

DTD 3220

8.58 €

Stainless-steel hose clamp in hollow polyester cover with rubber protection of the lock.

En Stock

Available

Spare parts

inflator - end-piece X01

DTD 3400

44.06 €

En Stock

inflator-knee-joint-with-screwed-fitting

Available

Spare parts

inflator - knee joint with screwed fitting

DTD 3406

12.36 €

DTD, inflator - knee joint with screwed fitting

En Stock

Available

Spare parts

inflator - safety valve 1,4 (OPV)

DTD-3407

12.44 €

DTD, inflator - safety valve 1,4 (OPV)

En Stock

Available

Spare parts

inflator - screw outlet flange

DTD-3409

12.68 €

DTD, inflator - screw outlet flange Male thread to place the inflator elbow and the overpressure valve. Includes what is displayed in the image The thread pitch where we will attack the outside of the overpressure valve or elbow of the inflator is 51mmø and works with wings DTD, ATS, Golem, DUX, Dir Zone, Scuba Force and some Mares wings

Fuera de Stock

ask us about availability

Complete single gear

J.Dive / DTD Ring 14 Cool

489.00 €

Wing Set consisting of a DTD Ring 14 Cool Wing in a color to choose from, J.Dive 316L Stainless steel backplate, continuous webbing harness and two tank holder straps. Ready to mount the tank and go diving!!!

En Stock

Available

DECO ESSENTIALS

JJ CCR Bailout Clamps (pair)

62100101

22.99 €

Stainless steel cylinder clamps with webbing to prevent scratches and abrasions. Used to secure the diluent cylinders, typically 7 liter or similar, in a GUE configured JJ CCR. Four would normally be required per unit.

En Stock

Available

Knifes & Cutters

Line cutter 50 mm

DTD 3308

3.87 €

Practical knife to cut all types of lines and ends. Its blade equipped with saw greatly facilitates the cutting operation. It is the replacement for the emergency knife with DTD cover Economical and really practical !!!

En Stock

Available

DECO ESSENTIALS

MOD stickers

1.31 €

MOD stickers Stickers for marking the maximum operating depth of the bottles. Available from 21m to 80 m Price is for one unit.

En Stock

Available

Arrows & Cookies

Orange Large Arrow

DTD 3111

0.67 €

Orange arrow large Large arrow for cavedivers, length is 87 mm, width 57 mm.

En Stock

DECO ESSENTIALS

Oxygen, 6mt, STICKER

DTD 3221

2.76 €

O2 Sticker Sticker marked "OXYGEN 6" to identify the bottles for the use of O2

Fuera de Stock

Ask us about availability

REELS, WETNOTES, BUOYS...

pad for wetnotes

DTD 3309

10.62 €

En Stock

Available

REELS, WETNOTES, BUOYS...

Pencil

DTD 3310

3.81 €

Special pencil for use in underwater scenarios.

Fuera de Stock

Out-of-Stock

Spare parts

Plug DTD for inflator/OPV opening

DTD 3410

11.76 €

DTD blind plug for the overpressure outlets of the wings: DTD, ATS, Golem, DIR Zone, Scuba Force

View

En Stock

Available

Spare parts

Pull ball - non-floatable

DTD 3411

6.05 €

Handle to mount on the drain / overpressure valves (OPV) of the wings and / or jackets.

En Stock

Available

Arrows & Cookies

Rectangular Red Cookie, REM

DTD 3123

0.67 €

Size: 64 x 39 x 3mm

En Stock

Available

Arrows & Cookies

Rectangular white cookie, REM

DTD 3125

0.67 €

Size: 64mm x 39mm x 3mm

En Stock

Available

Arrows & Cookies

Rectangular Yellow Cookie, REM

DTD 3124

0.67 €

Size 64 x 39 x 3mm

En Stock

Available

DECO ESSENTIALS

rubber band for 7 liters stage

DTD 3219

3.32 €

En Stock

Available

DECO ESSENTIALS

Rubber band for S80

DTD 3203

3.32 €

En Stock

Available

DECO ESSENTIALS

rubber band for stage S40

DTD 3202

3.13 €

rubber band for stage S40

En Stock

Available

STEEL HARDWARE

Screw set for backplate

DTD 3022

3.92 €

Screw set for mounting wing to backplate. Suitable for backplate 3 mm.

En Stock

Available

STEEL HARDWARE

Screw set for buoy pocket

DTD 3021

7.20 €

Screw set for buoy pocket with. Suitable for backplate 3 mm.

En Stock

STEEL HARDWARE

Screw set for buoy pocket, extra long (16mm)

DTD 3021L

7.20 €

Set of 8 extra long screws to mount the buoy pocket or backpad on 6mm backplates or in cases where a longer stud is required (stud size 16mm). The female thread is high-strength plastic and also slows the thread, making it more difficult to accidentally unscrew. This set is useable for 6mm backplates.

En Stock

Available

STEEL HARDWARE

Screw set for STA

DTD 3025

4.15 €

Screw set for mounting STA to backplate. Screws are longer then screws for compensator, 25 mm instead 20 mm. Also suitable for wing with 6 mm backplate.

En Stock

Available

STEEL HARDWARE

Screw set for weighting system

DTD 3023

7.39 €

Screw set for weighting system. Suitable for backplate 3 mm.

En Stock

Available

Spare parts

Scuba Force inflator - safety valve 1,4 (OPV)

SFOPV

16.00 €

DTD, inflator - safety valve 1,4 (OPV)

En Stock

Available

Spare parts

Service Kit for X01 end Inflator

DTD 3414

36.30 €

Box with 10 services for the X01 end inflator used in DTD, Scuba Force wings and in some other brands such as DIR Zone, AGIR, some Mares wings....

En Stock

Available

Arrows & Cookies

Small Yellow arrow

DTD 3117

0.58 €

Small trinagular ARROW for cavedivers, useful for marking line, etc. Length 64 mm, width 40 mm, thickness 3 mm. Colour yellow.

Fuera de Stock

-15%

Out-of-Stock

REELS, WETNOTES, BUOYS...

SPOOL 42MT ORANGE

DR-RE4620

24.99 € 29.40 €

View

En Stock

Available

REELS, WETNOTES, BUOYS...

SPOOL DTD (DELRIN)

21.16 €

SPOOL Decompression safety spool 17, 24 or 33 mThe spool is made from one piece of very durable Delrin. Can be used as a decompression or safety spool. Consists of the spool, c. 24 m of 2 mm PA line and short double-ender.

En Stock

Available

STEEL HARDWARE

stainless steel d-ring, low profile

DTD 3013

2.06 €

En Stock

Available

STEEL HARDWARE

Stainless Steel quick link

DTD 3019

2.98 €

Quick Link Quick-Link stainless-steel, dimensions 36 x 17 mm, diameter 3,5 mm, opening max 5 mm

En Stock

Available

STEEL HARDWARE

Stainless-steel D-Ring Bend

DTD 3012

2.86 €

Made of marine grade steel, 316L Ring thread: 4.8mmø Interior width in the widest areas: 55mm x 42mm

En Stock

stainless-steel-hose-clamp-s40-with-protection

Available

DECO ESSENTIALS

stainless-steel hose clamp S40 with protection

DTD 3204

8.58 €

stainless-steel hose clamp in hollow polyester cover with rubber protection of the lock

En Stock

stainless-steel-hose-clamp-s80-with-protection

Available

DECO ESSENTIALS

stainless-steel hose clamp S80 with protection

DTD 3205

9.15 €

stainless-steel hose clamp in hollow polyester cover with rubber protection of the lock

En Stock

Available

STEEL HARDWARE

stainless-steel stopper

DTD 3016

1.38 €

En Stock

Available

STEEL HARDWARE

stainless-steel stopper large

DTD 3018

2.71 €

En Stock

Available

SPARE PARTS & EXTRAS

Tank rubber knob Sherwood type

DTD 3303

6.99 €

rubber knob Indestructible valve rubber knob with stainless-steel inset

Fuera de Stock

Product available with different options

Reels & Spools

Thread/line with Kevlar core

0.23 €

Line is plaited from PES fibres with Kevlar (Aramid) line core. Aramid core fibres are tough and have no elongation. Options: Diameter of the thread: 1,8mm or 3mm Complete coil or by meters (the 1.8 mm coil is 800m long and the 3mm one is 250m)

View

En Stock

Available

REELS, WETNOTES, BUOYS...

Wetnotes cover

2210

20.28 €

En Stock

Available

REELS, WETNOTES, BUOYS...

WETNOTES DTD

25.23 €

En Stock

Available

REELS, WETNOTES, BUOYS...

Wetnotes Halcyon

41000001

48.40 €

Fuera de Stock

Ask us about availability

DTD

wing for single RING 14 Lite

DTD 1005

242.96 €

En Stock

Available

STEEL HARDWARE

wing nut M8 A4

DTD 3029

0.82 €

wing nut M8 A4

En Stock

Available

Arrows & Cookies

Yellow cookie Large

DTD 3113

0.67 €

Cookie large 55mm ø

Showing 1-291 of 291 item(s)