REBREATHER

rEvo units

HORIZON units

JJ-CCR units

Meg & Pathfdinder Units

SPARE PARTS

COUNTERLUNGS/WINGS

MAVs, Flowstops, fittings, blocks...

O2 SENSORS

PpO2 MONITORS

chemicals

BATTERIES

VALVES

TANKS & MORE...

Tank Labels

BOVs

Cables and adapters

En Stock

Available

JJ-CCR

JJ-CCR MAV spring

2026100009

9.00 €

En Stock

Available

JJ-CCR

JJ-CCR Mouthpiece for BOV or DSV

2050-20

15.70 €

En Stock

Available

JJ-CCR

JJ-CCR Nut ADV Side

3100-06

30.00 €

En Stock

JJ-CCR

JJ-CCR Nut Tee Side

3100-02

30.00 €

En Stock

Available

JJ-CCR

JJ-CCR Over pressure valve for 1st stage (10bar)

2010200003

29.00 €

Overpressure valve preset at 10Bar, indicated for the 1st stage of Oxygen Adjustable from 0 to 10 bar

En Stock

Available

inicio

JJ-CCR Red silicone O-Ring

2000-22

7.00 €

Silicone O-Ring. It is the one that is mounted on the breathing hose (we usually use it to hold the HUD cable), very useful to always carry it mounted as it serves as an emergency replacement for the base of the Ts.

En Stock

Available

inicio

JJ-CCR Screw for T Lung holding

4100-04

2.40 €

Spare part of the screw used for fixing the T (3 are used) to the base.

En Stock

Available

JJ-CCR

JJ-CCR Scrimnet filter kit Radial

2100-10

14.00 €

Scrimnet filter kit. 1 unit to use in Radial scrubber

En Stock

Available

JJ-CCR

JJ-CCR Scrubber bottom Axial

3060-01

48.76 €

En Stock

Available

JJ-CCR

JJ-CCR Scrubber nut

2100-20

14.80 €

En Stock

Available

JJ-CCR

JJ-CCR Sensor Cover

2000-60

86.50 €

A travel protection cover is now available from JJ-CCR. This cover will provide the inside of the JJ-head with sturdy protection for; the oxygen solenoid, sensors and threads.

En Stock

Available

JJ-CCR

JJ-CCR Tool for ADV

2016100000

15.00 €

En Stock

Available

Lola Valves

Lola Flexible Manifold 200Bar HPI-L

HPI-L 200

131.17 €

High pressure flexible hose for connecting SCR, PSCR and DIR and GUE rebreathers systems tanks. The stainless steel hose with a 90° swivel elbow for DIN 200 Bar. The hose is designed primarily for air and nitrox. When using TMX, there may be minimal leaks, which are manifested by the appearance of small bubbles on the surface of the hose, but this does...

En Stock

Available

Lola Valves

Lola Flexible Manifold Service Kit 200Bar

HPI-L service kit-200

16.05 €

Service Kit for Lola HPI-L 200Bar Flexible Manifolds

En Stock

Available

Lola Valves

Lola Flexible Manifold Service Kit 300Bar

HPI-L service kit-300

17.05 €

Service Kit for Lola HPI-L 300Bar Flexible Manifolds

En Stock

Available

Lola Valves

Lola Nitrox Valves Service Kit

V set II-Nitrox

32.00 €

Service Kit for Lola Nitrox T-SV and T-SVO valves

En Stock

Available

inicio

Lola QHK Tank holder

QHB Holder

45.69 €

Tank holder for use on the Lola Tank holder kit

En Stock

Available

TANKS & MORE...

Lola QHK Tank Holder Kit

159.90 €

The Lola tank holder kit is robust, safe and quick and easy to use. The ball and push button locking system makes opening and closing easy while keeping the system fixed without uncomfortable rattling. The profile of the support is only 13mm, making the tank (or whatever you fixed in...) fit very tightly to the base where we anchor the support. It is...

En Stock

Lola Valves

Lola T-SV 300 Air right valve

T-SV 300 R

139.67 €

Really robust valve with a design studied to facilitate handling in any environment, no matter how narrow or difficult, significantly increasing the user's speed of action and consequently general safety. It has two outlets, each activated by its own shut-off valve, in this way double outlets can be mounted on single cylinders, twin sets, supports for...

En Stock

Available

Lola Valves

Lola Valve Hand Wheel KV

20.97 €

Valve Hand Wheel for Lola Valves. NOTE: the vale is not included.

En Stock

Available

Lola Valves

Lola Valve Seat

Seat TKV

12.73 €

Seta for Valves T-SV and T-SVO

En Stock

Available

Lola Valves

Lola Valve Shaft

Valve Shaft

15.77 €

Lola Valve Shaft

En Stock

Available

Lola Valves

Lola Valves Service Kit

V set II-Air

25.74 €

Service Kit for Lola T-SV and T-SVO valves for use with Aire, trimix and Nitrox up to 40%

En Stock

Available

Lola Valves

Lola ZV Blind-End Plug G5/8" (DIN) 200Bar

ZV 200

20.25 €

Blind-end plug with pressure release screw

En Stock

Available

Lola Valves

Lola ZV-T G5/8" 300 Bar DIN Plug

ZV-T 300

24.79 €

The ZV-T plug protects the valve from contamination and from gas leakage from the bottle during transport. To release the gas and unscrew the plug, you just turn the rotary wheel (there is no need of key). The plug can be easily unscrewed even when under pressure. You just screw in the plug (we recommend to briefly open and close the valve). We also offer...

En Stock

Available

REGULATOR ACCESORIES

LP Hose Splitter 90º 1st stage

J.Dive-twin90-1st

30.00 €

Output multiplier made of stainless steel with two output oriented at 90º Allows the attachment of two low pressure regulator hoses (first stage ends) One 3/8" male (to attach to the 1st stage) to two 3/8-24 female outlets Low pressure only Dimensions of the block: 30 x 23 x 15mm

En Stock

Available

REGULATOR ACCESORIES

male/male 9/16" to 3/8" adapter

SFADT028

6.00 €

En Stock

REGULATOR ACCESORIES

Manifold 8 outputs

J.Dive-manifold8

78.51 €

Manifold block assy with 8b 3/8" standard outputs Solid brass construction for maximum durability Oxygen Compatible. Dimensions: 57 x 57 x 19mm Weight: 360gr

En Stock

-15%

Available

Computers Bags

Mares Controller Case XR

415184

14.02 € 16.49 €

Inside, this hard case is divided into an open main compartment and a small mesh pocket with zipper closure for storing charging cables or other accessories. The case features a heavy duty zipper with pulleys for easy grip and a D-ring to hold it wherever you want. Complete the Mares look with the micro-injected “Mares XR” logo for extra Mares-style...

En Stock

Available

TANKS & MORE...

MEG DIL Tank Label

ISC DEC Diluent Decal

4.12 €

MEG® DILUENT STICKER Dimensions: 20cm x 5cm

En Stock

Available

Meg

Meg T-Piece Cap (pair)

MTPC

34.00 €

This cap is designed to fit over the Meg T-piece when its not attached to the lung,This can be used for isolating the loop from the lungs when tying to find leaks or just for protection.SOLD IN A SET OF 2

En Stock

Available

Meg

Megalodon Carriage sensors O-Ring, down one

OR-042

4.12 €

It is the O-Ring that goes between the sensor carriage and the head itself, the smallest one. See attached photo.

En Stock

Available

Meg

Megalodon Carriage sensors upper O-Ring

OR-037

4.90 €

It is the O-ring that is located on the top of the sensor carriage, the largest one. See attached photo.

En Stock

Available

DECO ESSENTIALS

MOD stickers

1.08 €

MOD stickers Stickers for marking the maximum operating depth of the bottles. Available from 21m to 80 m Price is for one unit.

En Stock

Available

valves

Modular valve Right 232Bar

A16310608

61.98 €

O²CLEAN RIGHT SIDE EXPANDABLE 232 BAR G5/8 MONO VALVE “Right side” 232 bar expandable mono valve, without blind plug Do you need the blind plug? click here

En Stock

Available

valves

Mono valve 232Bar

A16310609

56.20 €

Single output Valve non-expandable 232Bar 25x2 EN-144 FLAT G/58

Showing 73-108 of 353 item(s)

Product added to wishlist