REBREATHER

rEvo units

HORIZON units

JJ-CCR units

Meg & Pathfdinder Units

SPARE PARTS

COUNTERLUNGS/WINGS

MAVs, Flowstops, fittings, blocks...

O2 SENSORS

PpO2 MONITORS

chemicals

BATTERIES

VALVES

TANKS & MORE...

Tank Labels

BOVs

Cables and adapters

Fuera de Stock

Ask us about availability

JJ-CCR

JJ-CCR Loop Weight

3100-04

31.50 €

En Stock

Available

MAVs, Flowstops, fittings, blocks...

JJ-CCR MAV

2026000000

185.00 €

The JJ-CCR Manual Addiction Valve has a 360º rotatory attached system which allow you easily to remove the on-board gas inlet and attached the off-board one in case of to be needed.

En Stock

Available

JJ-CCR

JJ-CCR MAV O-ring kit

2000-15

12.00 €

Complete kit for the JJ-CCR MAV maintenance.

En Stock

Available

JJ-CCR

JJ-CCR MAV spring

2026100009

9.00 €

En Stock

Available

JJ-CCR

JJ-CCR Membrane for dump valve

4100-01

1.00 €

En Stock

Available

JJ-CCR

JJ-CCR Mouthpiece for BOV or DSV

2050-20

15.70 €

En Stock

JJ-CCR

JJ-CCR Nut ADV Side

3100-06

30.00 €

En Stock

JJ-CCR

JJ-CCR Nut Tee Side

3100-02

30.00 €

En Stock

Available

JJ-CCR

JJ-CCR Over pressure valve for 1st stage (10bar)

2010200003

29.00 €

Overpressure valve preset at 10Bar, indicated for the 1st stage of Oxygen Adjustable from 0 to 10 bar

Fuera de Stock

Out of stock

O2 SENSORS

JJ-CCR oxygen sensor

2200-00

90.50 €

En Stock

-18%
New

Available

O2 SENSORS

JJ-CCR oxygen sensor more than 3 months

2200-00+3M

74.21 € 90.50 €

JJ sensors are described in the manufacturer's instructions as suitable for use only up to 3 months after their manufacturing date. However, provided the sealed bag containing them remains unopened, the sensors are suitable for use for up to 1 year after their manufacturing date. Due to this discrepancy between the instructions and actual effectiveness,...

Fuera de Stock

On Demand

JJ-CCR

JJ-CCR Radial Scrubber

3050-00

479.34 €

Radial scrubber for JJ-CCR rebreather This scrubber directly replaces the standard one supplied with the unit, without the need for additional couplings. The use of a Radial scrubber gives us several advantages, two of them stand out: More absorbent capacity (3kg), which offers us a longer "official" autonomy (230´) Its peculiar design offers us a best...

Fuera de Stock

Ask us about availability

JJ-CCR

JJ-CCR RBSM - Rebreather Safety Mouthpiece

301820011110001

132.00 €

The new design RBSM offers great security and comfort. The head-strap holds the mouthpiece firmly in position allowing for a very relaxed grip on the bite and significantly reducing jaw fatigue on longer dives. The crucial safety benefit is that the RBSM greatly increases the likelihood that the diver will remain on the loop in the event of going...

Fuera de Stock

Ask us about availability

JJ-CCR units

JJ-CCR Rebreather (CE Edition)

1000-00

7,900.00 €

This is the new JJ-CCR CE-Edition, launched in August 2014. Equipped with a Petrel computer, a digital HUD, manual supplemental O2 and diluent valves with the option of feeding in external gases. The rebreather comes ready to fly right out of the box. Fill it with gas and sofnolime and serious adventures is just about to begin. The philosophy behind the...

En Stock

Available

inicio

JJ-CCR Red silicone O-Ring

2000-22

7.00 €

Silicone O-Ring. It is the one that is mounted on the breathing hose (we usually use it to hold the HUD cable), very useful to always carry it mounted as it serves as an emergency replacement for the base of the Ts.

En Stock

Available

inicio

JJ-CCR Screw for T Lung holding

4100-04

2.00 €

Spare part of the screw used for fixing the T (3 are used) to the base.

En Stock

Available

JJ-CCR

JJ-CCR Scrimnet filter kit Radial

2100-10

12.00 €

Scrimnet filter kit. 1 unit to use in Radial scrubber

En Stock

Available

JJ-CCR

JJ-CCR Scrubber bottom Axial

3060-01

48.76 €

Fuera de Stock

Ask us about availability

JJ-CCR

JJ-CCR Scrubber bottom Radial

3055-00

48.76 €

En Stock

Available

JJ-CCR

JJ-CCR Scrubber nut

2100-20

14.80 €

En Stock

Available

JJ-CCR

JJ-CCR Sensor Cover

2000-60

86.50 €

A travel protection cover is now available from JJ-CCR. This cover will provide the inside of the JJ-head with sturdy protection for; the oxygen solenoid, sensors and threads.

Fuera de Stock

on demand

JJ-CCR

JJ-CCR Shearwater Petrel-3 controller

SH2000-40

1,652.07 €

En Stock

Available

JJ-CCR

JJ-CCR Tool for ADV

2016100000

15.00 €

En Stock

JJ-CCR

JJ-CCR Tool for Tee-ADV Fitting

4100-20

27.75 €

Tool to disassemble the bases of Ts of the rebreather JJ-CCR. Necessary to be able to adequately replace/manage the counter lungs

Fuera de Stock

Ask us about availability

JJ-CCR

JJ-CCR Wing

2012000000

387.00 €

Fuera de Stock

Ask us about availability

JJ-CCR

JJ-CCR wing inner bladder

2300-25

78.00 €

Fuera de Stock

Ask us about availability

JJ-CCR

JJ-CCR XRC Set (X-tended range canister & radial scrubber)

2006020001-XRC

1,649.00 €

The X-tended Range Canister provides the experienced diver with a total runtime of nearly 6 hours. The canister is extended in length by 50mm and the stand is shortened with 50 mm so the overall length of the unit stays the same! The canister comes complete with stand, handle and radial scrubber. All other parts from the original rebreather will fit...

Fuera de Stock

Ask us about availability

JJ-CCR units

JJ-Head Complete (No Sensors)

2000-30

3,304.96 €

View

En Stock

Available

Lola Valves

Lola Flexible Manifold 200Bar HPI-L

HPI-L 200

131.17 €

High pressure flexible hose for connecting SCR, PSCR and DIR and GUE rebreathers systems tanks. The stainless steel hose with a 90° swivel elbow for DIN 200 Bar. The hose is designed primarily for air and nitrox. When using TMX, there may be minimal leaks, which are manifested by the appearance of small bubbles on the surface of the hose, but this does...

Fuera de Stock

on demand

Lola Valves

Lola Flexible Manifold 300Bar HPI-L

HPI-L 300

131.17 €

High pressure flexible hose for connecting SCR, PSCR and DIR and GUE rebreathers systems tanks. The stainless steel hose with a 90° swivel elbow for DIN 300 Bar. The hose is designed primarily for air and nitrox. When using TMX, there may be minimal leaks, which are manifested by the appearance of small bubbles on the surface of the hose, but this does...

En Stock

Available

Lola Valves

Lola Flexible Manifold Service Kit 200Bar

HPI-L service kit-200

16.05 €

Service Kit for Lola HPI-L 200Bar Flexible Manifolds

En Stock

Available

Lola Valves

Lola Flexible Manifold Service Kit 300Bar

HPI-L service kit-300

16.05 €

Service Kit for Lola HPI-L 300Bar Flexible Manifolds

Fuera de Stock

Ask us about availability

Lola Valves

Lola Nitrox Valves Service Kit

V set II-Nitrox

27.62 €

Service Kit for Lola Nitrox T-SV and T-SVO valves

En Stock

Available

inicio

Lola QHK Tank holder

QHB Holder

45.69 €

Tank holder for use on the Lola Tank holder kit

En Stock

Available

TANKS & MORE...

Lola QHK Tank Holder Kit

159.90 €

The Lola tank holder kit is robust, safe and quick and easy to use. The ball and push button locking system makes opening and closing easy while keeping the system fixed without uncomfortable rattling. The profile of the support is only 13mm, making the tank (or whatever you fixed in...) fit very tightly to the base where we anchor the support. It is...

En Stock

Lola Valves

Lola T-SV 200 Air left valve

T-SV 200 L

139.67 €

Really robust valve with a design studied to facilitate handling in any environment, no matter how narrow or difficult, significantly increasing the user's speed of action and consequently general safety. It has two outlets, each activated by its own shut-off valve, in this way double outlets can be mounted on single cylinders, twin sets, supports for...

Showing 145-180 of 351 item(s)