En Stock Available Meg Dust Caps 9/16" NAN0003 29.00 € These dust caps are made to fit any standard 2nd stage hose and reg fitting.One use is to cap the oxygen solenoid and hose of your rebreather or cap the ends of the ADV hoseIt fits the kiss BOV, or can be used simply to protect and keep hoses clean.ALSO FITS ANY STANDARD 9/16 REGULATOR FITTINGThey come as a set 1 male and 1 female (one for the hose and... Add to cart
En Stock Available DECO ESSENTIALS Halcyon clamp with cordura cover 12.00 € Steel clamps protected with Halcyon cordura tube.Halcyon uses the highest quality steel to make the clamps. This makes them much more durable than other clamps available on the market and therefore, safer. Available in 3 sizes: S040 7 liters S080 Choose the necessary one from the drop-down menu. Add to cart
En Stock Available Cables and adapters JJ-CCR Cell adaptor CTOM-160 55.39 € This adapter is especially suitable to use Molex sensors in our JJ-CCR head NOTE: The ideal cable length is 160mm. Add to cart
En Stock Available Meg Meg T-Piece Cap (pair) MTPC 41.14 € This cap is designed to fit over the Meg T-piece when its not attached to the lung,This can be used for isolating the loop from the lungs when tying to find leaks or just for protection.SOLD IN A SET OF 2 Add to cart
Fuera de Stock On demand Wings Halcyon Evolve JJ rebreather wing 627.99 € The Evolve JJ Wing is precision-engineered for JJ-CCR rebreather divers seeking the performance and reliability of a true twin-cylinder wing. With 19 kg/42 lbs of lift and a streamlined design, it's built for demanding exploration dives. The Evolve JJ Rebreather Wing features a proven, circular bladder system that offers excellent stability and trim.... Add to cart
Fuera de Stock Ask us about availability Halcyon Halcyon Legend CCR wing Legend CCR 736.89 € The Legend™ CCR wing is purpose-built for rebreather divers who expect the best in comfort, balance, and performance. Tested with JJ, Revo, and SF2 units, the wing is designed to integrate seamlessly with a variety of CCR systems. Be bold and original by customizing it with the Halcyon Creator tool This wing features four precision-crafted pass-through... Add to cart
Fuera de Stock Ask us about availability PpO2 MONITORS HUD 4PIN AK connection FHUD 863.00 € Monitoring device for the O2 partial pressure in Closed-Circuit Rebreathers Very compact HUD Electronics box Fischer connector already assembled (ready to plug and use...) Add to cart
Fuera de Stock Ask us about availability PpO2 MONITORS HUD Fischer connection FHUD 895.00 € Monitoring device for the O2 partial pressure in Closed-Circuit Rebreathers Very compact HUD Electronics box Fischer connector already assembled (ready to plug and use...) Add to cart
Fuera de Stock Ask us about availability PpO2 MONITORS HUD Molex connection MOLEXHUD 1,139.45 € Monitoring device for the O2 partial pressure in Closed-Circuit Rebreathers Very compact HUD Electronics box Molex connector already assembled (ready to plug and use...) Add to cart
Fuera de Stock Ask us about availability DECO ESSENTIALS JJ CCR Bailout Clamps 62.100.101 22.99 € Stainless steel cylinder clamp with webbing to prevent scratches and abrasions. Used to secure the diluent cylinders, typically 7 liter or similar, in a GUE configured JJ CCR. Four would normally be required per unit. Add to cart
Fuera de Stock Ask us about availability Meg Meg breathing hoses caps (pair) 0042 26.50 € Add to cart
Fuera de Stock Ask us about availability Meg Meg Head bungs (pair) 0043 26.50 € These o-ringed plastic push in bung's are made to fit the inhale/exhale ports on the Meg head.The bung's will keep out water, bugs and stop air flowing through the scrubber bed helping to stop the sorb from drying out, Add to cart
Fuera de Stock Ask us about availability Meg Meg Lung Bungs (pair) MLB 49.91 € This cap is designed to fit over the Meg Counter Lung T-piece entry. This can be used for isolating them from dirty while the unit is stored.SOLD IN A SET OF 2 Add to cart
Fuera de Stock on demand Cables and adapters Molex male to Coax female adapter MOLEXTOSMB 34.73 € Adapter cable to be able using Molex sensors in our EVOLUTIONS OR INSPIRATIONS heads and in any other head witch use - have female coaxial connections installed Add to cart
Fuera de Stock Out of stock O2 SENSORS Sensor rubber cover RSCOVERBOX50 5.20 € NOTE: Sensor not included Add to cart
Fuera de Stock Out-of-Stock DECO ESSENTIALS Halcyon Nylon Tube 10000080 8.97 € Cordura tube to protect the steel clamps used in stage or bailout tanks, rebreather tanks, etc... the price is for meter View
Fuera de Stock Out-of-Stock inicio Molex Connectors (4 units kit) NAN0074 16.00 € 4 units of Molex housings and 8 units of gold plated pins View
Fuera de Stock Out-of-Stock Cables and adapters Molex to Coax adapter male-male CM-TO-MM 55.66 € Adapter cable to be able using Coax with other devices with Molex connections. View