REBREATHER

rEvo units

HORIZON units

JJ-CCR units

Meg & Pathfdinder Units

SPARE PARTS

COUNTERLUNGS/WINGS

MAVs, Flowstops, fittings, blocks...

O2 SENSORS

PpO2 MONITORS

chemicals

BATTERIES

VALVES

TANKS & MORE...

Tank Labels

BOVs

Cables and adapters

En Stock

inicio

Breathing hoses ballast (pair) (pre owned)

Jdive00BH

59.99 €

Weight rings for JJ-CCR breathing hoses. The rings are made of stainless steel and have exceptional finishes, which also fit perfectly into the JJ-CCR breathimngs hoses Specs:: Weigh 300gr/unit Inner: 36mm Outer: 56mm Width: 25mm NOTE: this product is used. It presents slight signs of wear that in some areas reveal the interior brass, nothing that could...

En Stock

Available

valves

Grifería en linea M26

A16817612

80.01 €

Valve with specific design for rebreather use, however si also perfect to use with any other use that requires this orientation. Connection M26 EU Nitrox 232bar Connection bottle neck 25x2 (EN-144 FLAT)

En Stock

Available

TANK LABELS

J.Dive "DILUENT" Tank label

j.divedil

2.99 €

Diluent Tank Sticker with high adhesion power. Dimensions: 182mm x 34mm

En Stock

Available

REGULATOR ACCESORIES

LP Hose Splitter 90º 1st stage

J.Dive-twin90-1st

36.30 €

Output multiplier made of stainless steel with two output oriented at 90º Allows the attachment of two low pressure regulator hoses (first stage ends) One 3/8" male (to attach to the 1st stage) to two 3/8-24 female outlets Low pressure only Dimensions of the block: 30 x 23 x 15mm

En Stock

REGULATOR ACCESORIES

Manifold 8 outputs

J.Dive-manifold8

95.00 €

Manifold block assy with 8b 3/8" standard outputs Solid brass construction for maximum durability Oxygen Compatible. Dimensions: 57 x 57 x 19mm Weight: 360gr

En Stock

Available

valves

Modular valve Right 232Bar

A16310608

75.00 €

O²CLEAN RIGHT SIDE EXPANDABLE 232 BAR G5/8 MONO VALVE “Right side” 232 bar expandable mono valve, without blind plug Do you need the blind plug? click here

En Stock

Available

valves

Mono valve 232Bar

A16310609

68.00 €

Single output Valve non-expandable 232Bar 25x2 EN-144 FLAT G/58

En Stock

Available

valves

Mono valve 232Bar (M18/1,5)

A16310635

75.00 €

Single output Valve non-expandable 232Bar M18/1,5 EN-144 FLAT G/58

En Stock

Available

valves

Rebreather valve G5/8"

A16817611

80.01 €

Rebreather mono valve G5/8 (DIN) 232Bar M25 thread (EN-144 FLAT) Clean in O2 service

En Stock

Available

valves

Rebreather valve G5/8" M18/1,5

A16817614

83.01 €

Rebreather mono valve Regulator connection: G5/8 (DIN) 232Bar Tank connection: M18/1,5 thread Clean in O2 service

En Stock

Available

ADAPTERS

Rotation Swivel Adapters

44.00 €

Male and female 3/8" conetions And HP swivel 90º one conection

Fuera de Stock

Ask about availability

Meg

ISC heads calibration kit

Calibration Kit J.Dive

89.99 €

It is a kit assembled by us and it consists of a flow restrictor connected to a ISC® genuine head plug by a low hose. It is the easiest and most accurate way to calibrate our Meg, Copis and Pathfinder heads. Only by connecting the flow restrictor to our Oxygen tank with the DIN standard connection and adjusting the Oxygen flow to the right one...

Fuera de Stock

Ask us about availability

inicio

Pair of breathing hose protectors

jdive0031

41.75 €

Pair of breathing hoses protectors. The sections are open with Velcro closure, to facilitate the assembly and disassembly operation. The measurements of each section are 50cm x 20cm

Fuera de Stock

Ask us about availability

Steel Tanks

Steel Tank 1,8 Liters 232Bar

130.99 €

Volume: 1,8l Fill pressure: 230bar Neck Thread: M18x1,5 Diameter: 82,5mm Length: 455mm Weight: 2,8kg

Fuera de Stock

Ask us about availability

Steel Tanks

Steel Tank 1,8 Liters 232Bar Black Color

171.00 €

Volume: 1,8l Fill pressure: 230bar Neck Thread: M18x1,5 Diameter: 82,5mm Length: 455mm Weight: 2,8kg

Fuera de Stock

Ask us about availability

Steel Tanks

Steel tank 2 liters Eurocylinders

170.01 €

Manufacturer: BtS-Eurocylinders Working pressure: 232Bar Test pressure: 450Bar Weight: 3.8kg Diameter: 114mm Height: 305mm Neck: 25x2 EN-144 FLAT

Fuera de Stock

Ask us about availability

Steel Tanks

Steel Tank 3 liter 100mm Black Eurocylinders

174.00 €

New 3 liters Steel tanks, perfect to change the look of your rebreather. Manufacturer: BtS-Eurocylinders Working pressure: 232Bar Test pressure: 450Bar Weight: 4.8kg Diameter: 100mm Height: 520mm Neck: 25x2 EN-144 FLAT

Fuera de Stock

Ask us about availability

TANKS & MORE...

Steel tank 3 liters 100mm Eurocylinders

174.00 €

3 litre steel Euro cylinder Ideal for rebreather divers and pony bottles. Manufacturer: BtS-Eurocylinders Working pressure: 232Bar Test pressure: 450Bar Weight: 4.8kg Diameter: 100mm Height: 520mm Neck: 25x2 EN-144 FLAT

Fuera de Stock

Ask us about availability

Steel Tanks

Steel tank 3 liters 114mm

182.00 €

Manufacturer: BtS-EurocylindersWorking pressure: 232BarTest pressure: 450BarWeight: 5.2kgDiameter: 114mmHeight: 420mmNeck: 25x2 EN-144 FLAT

Fuera de Stock

Ask us about availability

Steel Tanks

Steel Tank 3 liters 300Bar100mm

174.00 €

3 litre steel Euro cylinder, 300Bar and 100mm ø Ideal for rebreather divers and pony bottles. Manufacturer: BtS-Eurocylinders Working pressure: 300Bar Test pressure: 450Bar Weight: 4.97kg Diameter: 100mm Height: 520mm Neck: 25x2 EN-144 FLAT

Fuera de Stock

Out-of-Stock

REGULATOR ACCESORIES

Adaptader 9/16" female to 3/8" male

J.Dive-9-16

26.58 €

Adapter with 9/16" female connections on one side (standard second stage) and 3/8" male connections on the other (standard LP output 1st stage)

View

Fuera de Stock

Out-of-Stock

TANK LABELS

J.Dive "OXYGEN" tank label

j.diveoxy

2.99 €

Identification Oxygen Sticker for rebreather tanks, with high adhesion power. Dimensions: 184mm x 34mm

View

Fuera de Stock

Out-of-Stock

Cables and adapters

JJ-CCR coaxial to to molex Cell adaptor

J.DIVE-CTOM-160

19.36 €

This adapter is especially suitable to use Molex sensors in our JJ-CCR head NOTE: The ideal cable length is 160mm.

View

Fuera de Stock

Out-of-Stock

REGULATOR ACCESORIES

LP Hose Splitter 90º

J.Dive-twin90

36.30 €

Output multiplier made of stainless steel with one output oriented at 180º and another at 90º with respect to the input Allows the attachment of two low pressure regulator hoses (first stage ends) One 9/16-18 male inlet to two 3/8-24 female outlets Low pressure only Dimensions of the block: 30 x 23 x 15mm

View

Showing 1-24 of 26 item(s)

Product added to wishlist