REBREATHER

rEvo units

HORIZON units

JJ-CCR units

Meg & Pathfdinder Units

SPARE PARTS

COUNTERLUNGS/WINGS

MAVs, Flowstops, fittings, blocks...

O2 SENSORS

PpO2 MONITORS

chemicals

BATTERIES

VALVES

TANKS & MORE...

Tank Labels

BOVs

Cables and adapters

En Stock

inicio

Breathing hoses ballast (pair) (pre owned)

Jdive00BH

49.58 €

Weight rings for JJ-CCR breathing hoses. The rings are made of stainless steel and have exceptional finishes, which also fit perfectly into the JJ-CCR breathimngs hoses Specs:: Weigh 300gr/unit Inner: 36mm Outer: 56mm Width: 25mm NOTE: this product is used. It presents slight signs of wear that in some areas reveal the interior brass, nothing that could...

En Stock

Available

TANK LABELS

J.Dive "DILUENT" Tank label

j.divedil

2.47 €

Diluent Tank Sticker with high adhesion power. Dimensions: 182mm x 34mm

En Stock

Available

Lola Valves

Lola Flexible Manifold 200Bar HPI-L

HPI-L 200

131.17 €

High pressure flexible hose for connecting SCR, PSCR and DIR and GUE rebreathers systems tanks. The stainless steel hose with a 90° swivel elbow for DIN 200 Bar. The hose is designed primarily for air and nitrox. When using TMX, there may be minimal leaks, which are manifested by the appearance of small bubbles on the surface of the hose, but this does...

En Stock

Available

Lola Valves

Lola Flexible Manifold Service Kit 200Bar

HPI-L service kit-200

16.05 €

Service Kit for Lola HPI-L 200Bar Flexible Manifolds

En Stock

Available

Lola Valves

Lola Flexible Manifold Service Kit 300Bar

HPI-L service kit-300

17.05 €

Service Kit for Lola HPI-L 300Bar Flexible Manifolds

En Stock

Available

Lola Valves

Lola Nitrox Valves Service Kit

V set II-Nitrox

32.00 €

Service Kit for Lola Nitrox T-SV and T-SVO valves

En Stock

Available

inicio

Lola QHK Tank holder

QHB Holder

45.69 €

Tank holder for use on the Lola Tank holder kit

En Stock

Available

TANKS & MORE...

Lola QHK Tank Holder Kit

159.90 €

The Lola tank holder kit is robust, safe and quick and easy to use. The ball and push button locking system makes opening and closing easy while keeping the system fixed without uncomfortable rattling. The profile of the support is only 13mm, making the tank (or whatever you fixed in...) fit very tightly to the base where we anchor the support. It is...

En Stock

Lola Valves

Lola T-SV 300 Air right valve

T-SV 300 R

139.67 €

Really robust valve with a design studied to facilitate handling in any environment, no matter how narrow or difficult, significantly increasing the user's speed of action and consequently general safety. It has two outlets, each activated by its own shut-off valve, in this way double outlets can be mounted on single cylinders, twin sets, supports for...

En Stock

Available

Lola Valves

Lola Valve Hand Wheel KV

20.97 €

Valve Hand Wheel for Lola Valves. NOTE: the vale is not included.

En Stock

Available

Lola Valves

Lola Valve Seat

Seat TKV

12.73 €

Seta for Valves T-SV and T-SVO

En Stock

Available

Lola Valves

Lola Valve Shaft

Valve Shaft

15.77 €

Lola Valve Shaft

En Stock

Available

Lola Valves

Lola Valves Service Kit

V set II-Air

25.74 €

Service Kit for Lola T-SV and T-SVO valves for use with Aire, trimix and Nitrox up to 40%

En Stock

Available

Lola Valves

Lola ZV Blind-End Plug G5/8" (DIN) 200Bar

ZV 200

20.25 €

Blind-end plug with pressure release screw

En Stock

Available

Lola Valves

Lola ZV-T G5/8" 300 Bar DIN Plug

ZV-T 300

24.79 €

The ZV-T plug protects the valve from contamination and from gas leakage from the bottle during transport. To release the gas and unscrew the plug, you just turn the rotary wheel (there is no need of key). The plug can be easily unscrewed even when under pressure. You just screw in the plug (we recommend to briefly open and close the valve). We also offer...

En Stock

Available

REGULATOR ACCESORIES

LP Hose Splitter 90º 1st stage

J.Dive-twin90-1st

30.00 €

Output multiplier made of stainless steel with two output oriented at 90º Allows the attachment of two low pressure regulator hoses (first stage ends) One 3/8" male (to attach to the 1st stage) to two 3/8-24 female outlets Low pressure only Dimensions of the block: 30 x 23 x 15mm

En Stock

REGULATOR ACCESORIES

Manifold 8 outputs

J.Dive-manifold8

78.51 €

Manifold block assy with 8b 3/8" standard outputs Solid brass construction for maximum durability Oxygen Compatible. Dimensions: 57 x 57 x 19mm Weight: 360gr

Fuera de Stock

Ask about availability

Meg

ISC heads calibration kit

Calibration Kit J.Dive

74.37 €

It is a kit assembled by us and it consists of a flow restrictor connected to a ISC® genuine head plug by a low hose. It is the easiest and most accurate way to calibrate our Meg, Copis and Pathfinder heads. Only by connecting the flow restrictor to our Oxygen tank with the DIN standard connection and adjusting the Oxygen flow to the right one...

Fuera de Stock

on demand

Lola Valves

Lola Flexible Manifold 300Bar HPI-L

HPI-L 300

131.17 €

High pressure flexible hose for connecting SCR, PSCR and DIR and GUE rebreathers systems tanks. The stainless steel hose with a 90° swivel elbow for DIN 300 Bar. The hose is designed primarily for air and nitrox. When using TMX, there may be minimal leaks, which are manifested by the appearance of small bubbles on the surface of the hose, but this does...

Fuera de Stock

on demand

Lola Valves

Lola T-SVO 200 BD Nitrox left valve 3/4"

T-SVO 200 BD NITROX-L

214.75 €

Fuera de Stock

on demand

Lola Valves

Lola T-SVO 200 BD Nitrox right valve 3/4"

T-SVO 200 BD NITROX-R

214.75 €

Fuera de Stock

Ask us about availability

Lola Valves

Lola T-SVO 200 Nitrox left valve

T-SVO 200 NITROX-L

179.00 €

Fuera de Stock

Ask us about availability

Lola Valves

Lola T-SVO 200 Nitrox right valve

T-SVO 200 NITROX-R

179.00 €

Fuera de Stock

on demand

Lola Valves

Lola T-SVO 300 BD Air Nitrox valve 3/4"

T-SVO 300 BD NITROX-L

214.75 €

Showing 1-24 of 40 item(s)

Product added to wishlist