Fuera de Stock Ask us about availability DTD DTD Stream CCR wing 299.00 € This wing is especilly designed for diving with CCR rebreathers. buoyancy: 150N, 200 N or 250N material: cover Cordura 2000, high-frequency welded inner tube Cordura 560 with PU seam coating, zip YKK weight: 1,47 kg Add to cart
Fuera de Stock Ask us about availability DTD DTD Stream RIng CCR 20 wing DTD 1202 299.00 € Circular wing is especilly designed for diving with CCR rebreathers.Height of empty wing = 65 cm, width = 70 cm. buoyancy: 200 N material: cover Cordura 2000, high-frequency welded inner tube Cordura 560 with PU seam coating, zip YKK weight: 1,42 Add to cart
En Stock Available Meg Dust Caps 9/16" NAN0003 29.00 € These dust caps are made to fit any standard 2nd stage hose and reg fitting.One use is to cap the oxygen solenoid and hose of your rebreather or cap the ends of the ADV hoseIt fits the kiss BOV, or can be used simply to protect and keep hoses clean.ALSO FITS ANY STANDARD 9/16 REGULATOR FITTINGThey come as a set 1 male and 1 female (one for the hose and... Add to cart
En Stock Available DECO ESSENTIALS Halcyon clamp with cordura cover 12.00 € Steel clamps protected with Halcyon cordura tube.Halcyon uses the highest quality steel to make the clamps. This makes them much more durable than other clamps available on the market and therefore, safer. Available in 3 sizes: S040 7 liters S080 Choose the necessary one from the drop-down menu. Add to cart
Fuera de Stock Ask us about availability Halcyon Halcyon Evolve JJ-CCR Wing 10400045 627.99 € Designed for use with rebreathers with back-mounted counterlungs requiring more lift and a wider profile. This wing is based on the proven Evolve design while incorporating unique changes to facilitate comfort and functionality. It has two openings are for better hose guidance as well as a special cut. The cover is made of 1000 Cordura. The buoyancy of... Add to cart
Fuera de Stock Out-of-Stock DECO ESSENTIALS Halcyon Nylon Tube 10000080 8.97 € Cordura tube to protect the steel clamps used in stage or bailout tanks, rebreather tanks, etc... the price is for meter View
En Stock Available DECO ESSENTIALS hose clamp for 7 l stage with protection DTD 3220 8.58 € Stainless-steel hose clamp in hollow polyester cover with rubber protection of the lock. Add to cart
Fuera de Stock New Ask us about availability PpO2 MONITORS HUD 4PIN AK connection FHUD 750.20 € Monitoring device for the O2 partial pressure in Closed-Circuit Rebreathers Very compact HUD Electronics box Fischer connector already assembled (ready to plug and use...) Add to cart
Fuera de Stock New Ask us about availability PpO2 MONITORS HUD Fischer connection FHUD 792.55 € Monitoring device for the O2 partial pressure in Closed-Circuit Rebreathers Very compact HUD Electronics box Fischer connector already assembled (ready to plug and use...) Add to cart
Fuera de Stock Ask us about availability PpO2 MONITORS HUD Molex connection MOLEXHUD 919.48 € Monitoring device for the O2 partial pressure in Closed-Circuit Rebreathers Very compact HUD Electronics box Molex connector already assembled (ready to plug and use...) Add to cart
En Stock Available DECO ESSENTIALS JJ CCR Bailout Clamps (pair) 62100101 22.99 € Stainless steel cylinder clamps with webbing to prevent scratches and abrasions. Used to secure the diluent cylinders, typically 7 liter or similar, in a GUE configured JJ CCR. Four would normally be required per unit. Add to cart
Fuera de Stock Out-of-Stock Cables and adapters JJ-CCR Cell adaptor CTOM-160 34.73 € This adapter is especially suitable to use Molex sensors in our JJ-CCR head NOTE: The ideal cable length is 160mm. View