En Stock Available Meg Dust Caps 9/16" NAN0003 29.00 € These dust caps are made to fit any standard 2nd stage hose and reg fitting.One use is to cap the oxygen solenoid and hose of your rebreather or cap the ends of the ADV hoseIt fits the kiss BOV, or can be used simply to protect and keep hoses clean.ALSO FITS ANY STANDARD 9/16 REGULATOR FITTINGThey come as a set 1 male and 1 female (one for the hose and... Add to cart
Fuera de Stock New Ask us about availability PpO2 MONITORS HUD 4PIN AK connection FHUD 750.20 € Monitoring device for the O2 partial pressure in Closed-Circuit Rebreathers Very compact HUD Electronics box Fischer connector already assembled (ready to plug and use...) Add to cart
Fuera de Stock New Ask us about availability PpO2 MONITORS HUD Fischer connection FHUD 792.55 € Monitoring device for the O2 partial pressure in Closed-Circuit Rebreathers Very compact HUD Electronics box Fischer connector already assembled (ready to plug and use...) Add to cart
Fuera de Stock Ask us about availability PpO2 MONITORS HUD Molex connection MOLEXHUD 919.48 € Monitoring device for the O2 partial pressure in Closed-Circuit Rebreathers Very compact HUD Electronics box Molex connector already assembled (ready to plug and use...) Add to cart
En Stock Available TANKS & MORE... Inox clamp with internal protection 10.25 € Available in 5 sizes: For tanks up to 127 mmø (100 to 127mm) For tanks up to 152 mmø (127 to 152mm) For tanks up to 178 mmø (152 to 178mm) For tanks up to 203 mmø (178 to 203mm) For tanks up to 216 mmø (203 to 216mm) The protection come mounted to use the clamps in the described measurement ranges, however, the protection can be cut easily making the... Add to cart
En Stock Available Cables and adapters JJ-CCR Cell adaptor CTOM-160 34.73 € This adapter is especially suitable to use Molex sensors in our JJ-CCR head NOTE: The ideal cable length is 160mm. Add to cart
Fuera de Stock Ask us about availability Meg Meg breathing hoses caps (pair) 0042 26.50 € Add to cart
Fuera de Stock Ask us about availability Meg Meg Head bungs (pair) 0043 26.50 € These o-ringed plastic push in bung's are made to fit the inhale/exhale ports on the Meg head.The bung's will keep out water, bugs and stop air flowing through the scrubber bed helping to stop the sorb from drying out, Add to cart
Fuera de Stock Ask us about availability Meg Meg Lung Bungs (pair) MLB 49.91 € This cap is designed to fit over the Meg Counter Lung T-piece entry. This can be used for isolating them from dirty while the unit is stored.SOLD IN A SET OF 2 Add to cart
En Stock Available Meg Meg T-Piece Cap (pair) MTPC 41.14 € This cap is designed to fit over the Meg T-piece when its not attached to the lung,This can be used for isolating the loop from the lungs when tying to find leaks or just for protection.SOLD IN A SET OF 2 Add to cart
En Stock Available inicio Molex Connectors (4 units kit) NAN0074 16.00 € 4 units of Molex housings and 8 units of gold plated pins Add to cart
En Stock Available Cables and adapters Molex to Coax adaptor MOLEXTOSMB 34.73 € Adapter cable to be able using Molex sensors in our EVOLUTIONS OR INSPIRATIONS heads and in any other head witch use - have female coaxial connections installed Add to cart
En Stock Available O2 SENSORS Sensor rubber cover RSCOVERBOX50 5.20 € NOTE: Sensor not included Add to cart
En Stock Available Meg Si-Tech O-Ring for valve port 80088 1.82 € O-Ring to use with Valve Port ref. 11032 Add to cart
En Stock -18% Available TANKS & MORE... Tanks fixation ACCB-20 74.69 € 91.08 € Tanks fixation Perfect to attach any pony tank like the Argon tank or extra Oxygen tank, to another tank or to the rebreather canister side It´s Stainless Steel made Add to cart