En Stock Available ADAPTERS 2nd Stage Quick Connect-Disconnect system SF2LADAP INFL 45.00 € 9/16" female adapter (second stage inlet) to standard jacket quick connect Add to cart
En Stock Available REGULATOR ACCESORIES 9/16 male to 3/8 female SFAD02 6.50 € 9/16" male to 3/8" female Add to cart
En Stock Available REGULATOR ACCESORIES Adapter 1/2" a 3/8" SFAD04 6.50 € Adapter 1/2" a 3/8" male 1/2" to female 3/8" Add to cart
En Stock Available ADAPTERS Adapter 3/8" female to 9/16" female DT331A 45.00 € Female-female adapter 3/8" to 9/16" The photo shows both sides of the adapter for illustrative purposes only but ONLY one unit is included in the price. Add to cart
En Stock New Available chemicals Disinfectant Fluid EW 80 1 liter 810001 73.00 € Hygienic cleaning for all diving equipment. EW 80 is concentrated, it not only cleans effectively, but is also cost-effective. Disinfectant fluid for any diving equipment and plastic or metal parts. Disinfect for 15 minutes with a 1% solution of this product. Desinfecto kills bacteria and mildew, deactivates viruses, is non-flammable and biodegradable. B... Add to cart
En Stock Available Meg Dust Caps 9/16" NAN0003 29.00 € These dust caps are made to fit any standard 2nd stage hose and reg fitting.One use is to cap the oxygen solenoid and hose of your rebreather or cap the ends of the ADV hoseIt fits the kiss BOV, or can be used simply to protect and keep hoses clean.ALSO FITS ANY STANDARD 9/16 REGULATOR FITTINGThey come as a set 1 male and 1 female (one for the hose and... Add to cart
En Stock Available REGULATOR ACCESORIES Elbow 3/8" SFAE0113 24.20 € Rotating elbow for connection to the first stage, male / female connections 3/8 "The elbow rotates and can be oriented where needed, rotates 360º Add to cart
En Stock Available ADAPTERS Female part quick connection system SF S-03-4F 35.01 € Female part of the big flow connection system. This part is similar to the ends of the standard inflation hoses, but with much robustness and much more gas flow, the needed for a great diver demand. It has a screw dial part that allows us to block the connection, while blocked it has not possible to disconnect. The hose connection is male 9/16 " (standard... Add to cart
En Stock Available ADAPTERS Female part quick connection system 3/8" SF S-03-4F 3/8 35.00 € Female part of the big flow connection system. This part is similar to the ends of the standard inflation hoses, but with much robustness and much more gas flow, the needed for a great diver demand. It has a screw dial part that allows us to block the connection, while blocked it has not possible to disconnect. The hose connection is a female 38/" To use... Add to cart
En Stock Available REGULATOR ACCESORIES Flow Stop HQ version SF032DL 30.00 € 2nd Stage Shut with 9/16" male/female connections Add to cart
Fuera de Stock New Ask us about availability PpO2 MONITORS HUD 4PIN AK connection FHUD 750.20 € Monitoring device for the O2 partial pressure in Closed-Circuit Rebreathers Very compact HUD Electronics box Fischer connector already assembled (ready to plug and use...) Add to cart
Fuera de Stock New Ask us about availability PpO2 MONITORS HUD Fischer connection FHUD 792.55 € Monitoring device for the O2 partial pressure in Closed-Circuit Rebreathers Very compact HUD Electronics box Fischer connector already assembled (ready to plug and use...) Add to cart
Fuera de Stock Ask us about availability PpO2 MONITORS HUD Molex connection MOLEXHUD 919.48 € Monitoring device for the O2 partial pressure in Closed-Circuit Rebreathers Very compact HUD Electronics box Molex connector already assembled (ready to plug and use...) Add to cart
Fuera de Stock Out-of-Stock Cables and adapters JJ-CCR Cell adaptor CTOM-160 34.73 € This adapter is especially suitable to use Molex sensors in our JJ-CCR head NOTE: The ideal cable length is 160mm. View
Fuera de Stock Ask us about availability Meg Meg breathing hoses caps (pair) 0042 26.50 € Add to cart
Fuera de Stock Ask us about availability Meg Meg Head bungs (pair) 0043 26.50 € These o-ringed plastic push in bung's are made to fit the inhale/exhale ports on the Meg head.The bung's will keep out water, bugs and stop air flowing through the scrubber bed helping to stop the sorb from drying out, Add to cart
Fuera de Stock Ask us about availability Meg Meg Lung Bungs (pair) MLB 49.91 € This cap is designed to fit over the Meg Counter Lung T-piece entry. This can be used for isolating them from dirty while the unit is stored.SOLD IN A SET OF 2 Add to cart
En Stock Available Meg Meg T-Piece Cap (pair) MTPC 41.14 € This cap is designed to fit over the Meg T-piece when its not attached to the lung,This can be used for isolating the loop from the lungs when tying to find leaks or just for protection.SOLD IN A SET OF 2 Add to cart
En Stock Available inicio Molex Connectors (4 units kit) NAN0074 16.00 € 4 units of Molex housings and 8 units of gold plated pins Add to cart
En Stock Available Cables and adapters Molex to Coax adaptor MOLEXTOSMB 34.73 € Adapter cable to be able using Molex sensors in our EVOLUTIONS OR INSPIRATIONS heads and in any other head witch use - have female coaxial connections installed Add to cart
En Stock Available ADAPTERS One way system, male part SF AB-09 33.90 € The male part has a non-return valve that only allows the gas to flow in one direction. The hose connection is male 9/16 To use with this other part Do you need the service kit for this part? FOLLOW THIS LINK Add to cart
En Stock Available REGULATOR ACCESORIES Orientador de salidas (triplicador) SFDY051 25.00 € Outputs trippler to connect to the first stage and to be able to guide while tripling the 3/8" low outputs It has a 3/8 "male connection and three 3/8" female connections. Two of the female connections are oriented 90º from the connection to the first stage and the third is in a straight line. Add to cart
Fuera de Stock Ask us about availability valves Rebreather mono valve G5/8" T07122 65.39 € Rebreather mono valve G5/8 (DIN) 232Bar M25 thread (EN-144 FLAT) Clean in O2 service Add to cart
En Stock Available ADAPTERS Scuba Force 90º fixed elbow for second stage SFS013 26.00 € 90º fixed elbow for second stage. 9/16" male/female connection Add to cart
En Stock Available REGULATOR ACCESORIES Scuba Force LP Hose Splitter SFAD30 30.00 € LP Hose Splitter • Allows the attachment of two low pressure regulator hoses (first stage ends)• One 9/16-18 male inlet to two 3/8-24 female outlets• Chromed brass construction• Low pressure only Add to cart
En Stock Available ADAPTERS Second stage male part quick connection system SF S-03-4M 11.00 € Second stage part of the quick connection system TO USE WITH THIS OTHER PART Add to cart
En Stock Available O2 SENSORS Sensor rubber cover RSCOVERBOX50 5.20 € NOTE: Sensor not included Add to cart
Fuera de Stock New Ask us about availability SF2 eCCR SF2 MAV Block Diluent side DT021OVMET 129.00 € SF2 rebreather MAV block. This is the block only, does not include hoses, neither push button Add to cart
Fuera de Stock New On demand SF2 eCCR SF2 MAV Block Oxygen side DT021OVMETOXY 129.00 € SF2 rebreather MAV block. This is the block only, does not include hoses, neither push button Add to cart
Fuera de Stock New On demand SF2 eCCR SF2 MAV Push Buttom DT036-38 30.25 € SF2 rebreather MAV push button, for both sides Oxygen and Diluent Add to cart
Fuera de Stock New On demand SF2 eCCR SF2 O2 Sidemount Injection SFSMO2PB 76.23 € SF2 rebreather Sidemount version push button Add to cart
En Stock Available STEEL HARDWARE Stainless steel hose clamp 3.87 € Stainless steel clamps for fixing the breathing hoses, or anything you need... Wide: 12mmTwo sizes available:30 to 45mm (S)32 to 50mm (M) ATTENTION: the price is for one unit. Add to cart
Fuera de Stock Product available with different options COMPLEMENTS Stainless steel tank clamp W5 7.01 € 6 sizes available: 70mm a 90mm (XS) 90mm a 110mm (S) 100mm a 120mm (M) 120mm a 140mm (L) 140 a 16mm (XL) 170 a 190mm (XXL) View
En Stock Available COMPLEMENTS Tanks fixation Short SFPCSH 65.00 € Tanks fixation Perfect to attach any pony tank like the Argon tank or extra Oxygen tank, to another tank or to the rebreather canister side It´s Stainless Steel made Add to cart