REGULATORS

Special regulators sets

AQUALUNG

APEKS

Scubapro

Mares

CRESSI

Dynamic Nord

TECLINE

HALCYON

Seac Sub

HOLLIS

ATOMIC AQUATICS

ScubaForce

OMS

DIVE RITE

FIRST STAGES

Stage/Bailout regulators

OCTOPUS

SECOND STAGES

Tel Sets

Pressure Gauges

REGULATOR ACCESORIES

Service kits and O-Rings

Spare parts

Tools and grease

Regulator bags

Gadgets

Smaco Systems

Boat Emergency Kits

Chemicals

Fuera de Stock

Product available with different options

Spare parts and kits

Apeks 2nd stage adjustment screw

2.00 €

1: Brightness Adjusting Knob XTX50 and XTX200 2: Satin Adjusting Knob XTX100 3: PVD Tungsten Adjusting Screw 4: Spring adjuster 5: Cap of the adjustment system 6: Black Saphire Adjusting Knob 7: MTX-RC Adjusting Knob

View

En Stock

Available

REGULATOR ACCESORIES

Apeks 2nd stage Bungee Mount kit

RA117111

17.89 €

This is the typical "Necklace" system for the second secondary stage but a little more complete than the classic ones mounted with knots or flanges. This system has a locking feature to retain a regulator in the mouth of an unconscious diver during a rescue situation where it may be required.

En Stock

Apeks exhaust membrane 2nd stage ATX, XTX

Available

Spare parts and kits

Apeks 2nd stage exhaust membrane

RG912050

6.00 €

Common for all Apeks AT and ATX 2nd stage, also works with XTX and MTX 2nd stages

En Stock

Available

Spare parts and kits

Apeks 2nd stage parts

1.80 €

Apeks second stage parts for all models...AT, ATX, XTX, MTX and MTX-RC Choose the appropriate one(s), using both the picture and the descriptive list as a guide. NOTE: spare parts are not refundable!!!

En Stock

inicio

Apeks 2nd stage Spindle Collar

rg912392

5.90 €

Apeks 2nd stage Spindle Collar Useable on XTX, ATX and MTX 2nd stages. The price is only for the plastic piece.

En Stock

Apeks 5th port for FSR and FST 1st stages

Available

Spare parts and kits

Apeks 5th port for FSR and FST 1st stages

RA117114

31.00 €

An upgrade kit with the DST (XTX50) First stage of Apeks can be extended by a further means pressure outlet. This is then located on top of the rotary distributor block, allowing an even better hose configuration. In this kit, all seals, as well as an illustrated manual (English) are included. This kit MUST NOT be retro-fit to any older 1st stage valve....

Fuera de Stock

-20%

Out-of-Stock

inicio

Apeks AT 2nd stage

AP-AT2

111.74 € 139.67 €

Second Stage Pneumatically-balanced second stage results in smooth, easy breathing. The integrated venturi control provides a performance boost at depth while preventing unwanted freeflow at the surface. The Comfo-bite™ mouthpiece virtually eliminates jaw-fatigue.

View

Fuera de Stock

-30%

Ask us about availability

APEKS

Apeks AT Stage 3 with Octopus

rq111111

300.25 € 428.93 €

Before the XTX range of regulators came along, the ATX models ruled the seas. The ATX is still available today and offers a fully balanced first and second stage with cold water capability (can be used in all temperatures including those below 10 C / 50 F).

En Stock

Available

Spare parts and kits

Apeks AT-ATX 2nd stages Front Cover Parts

2.20 €

Apeks AT and ATX 2nd stages Front Cover Parts Choose the required part from the dropdown menu according to the following relationship: 1: ATX40 Decal 2: Purge Button 3: Spring 4: Front Black 5: Front Yellow 6: Click here to go direct to the product

En Stock

Available

Spare parts and kits

Apeks ATX / XTX Diaphragm Assy

RG912123

5.34 €

Main diaphragm of the second stages Apeks XTX, AT and ATX all versions

Fuera de Stock

-10%
New

Out-of-Stock

APEKS

Apeks ATX single tank tech set

RQ112111-tek

487.19 € 541.32 €

Technical configuration for a single tank. Components: Apeks DS4 1st stage Apeks ATX40 2nd main stage Apeks AT20 2nd secondary stage 52mm J.Dive metal pressure gauge 210cm regulator hose 56cm regulator hose 60cm HP hose 2 x swivel snap hooks Collar for 2nd secondary stage

View

En Stock

-25%

APEKS

Apeks ATX Stage 3 DIN

RQ112111

352.69 € 470.25 €

Fuera de Stock

-26%

Out-of-Stock

APEKS

Apeks ATX40 second stage

RS112114-B

103.36 € 139.67 €

This octopus is based upon the ATX second stage with proven cold water capability and the performance you would expect from an Apeks pneumatically balanced valve. It features a diver-adjustable venturi control, a high visibility yellow front cover, yellow accent pieces and a 36” yellow hose.

View

En Stock

Available

Spare parts and kits

Apeks Ball joint service kit

RS135121

5.00 €

Service Kit for Apeks second stage hose ball joints Not compatible with O2 NOTE: Aqualung and Apeks service kits are only available to qualified technicians officially approved by Aqualung Group. If you need them, contact us in order to validate access to these spare parts.

En Stock

Available

Spare parts and kits

Apeks Compensation Chamber inner parts

4.50 €

Internal parts of the Apeks 1st satges Ambient Pressure Compensation Chamber The parts are: Spring, Spring Seat and Valve Lifter Choose the necessary part(s) from the drop-down menu following the relationship described below: 1: Spring for all Apeks 1st stages except Flight 2: Spring for Flight 1st stage 3: Spring seat for all Apeks 1st stages except...

En Stock

Available

Spare parts and kits

Apeks Cover Exhaust Valve for At and ATX 2nd stage

4.00 €

Fuera de Stock

-20%

Out-of-Stock

APEKS

Apeks DB4 First stage M26 Nitrox/O2

RT111114

164.63 € 205.79 €

100% O2 clean DB4 First Stage from Apeks is designed with the cold-water exploration diver in mind. This is the latest cold-water innovation, an over-moulded first stage endcap that reduces ice build-up around the first stage. This technology greatly reduces the risk of a free flow in low temperatures. Cold water performance is further improved by heat...

View

Fuera de Stock

-20%

Out-of-Stock

inicio

Apeks DB4+ 1st stage

RT111116

237.35 € 296.69 €

This compact, ultra-rugged Stage 1 is the result of combining the time-tested DS4 platform with MTX technology. A robust dry chamber closure with a reinforced membrane helps prevent ice build-up while protecting the regulator from impact. A heat exchanger around the diaphragm increases the temperature of the breathing mixture inside the 1st stage. Classic...

View

En Stock

Available

Spare parts and kits

Apeks Diaphragm and Environmental Clamp several models

31.60 €

Apeks Diaphragm and Environmental Clamp for Apeks 1st stage: MTX-R MTX-RC XL4 XL4+ 1: Diaphragm Clamp cover common to all models 2: Environmental End Cap (black) 3: Environmental End Cap (Grey)

En Stock

Available

Spare parts and kits

Apeks Diaphragm Clamp Chrome...

RG912303

26.94 €

Apeks Diaphragm Cap, to use with these 1st stages: XTX200 TEK3 XTX100

Fuera de Stock

Apeks DIN 300Bar or M26 connection screw.

Apeks DIN 300Bar or M26 connection screw. 2

Product available with different options

Spare parts and kits

Apeks DIN 300Bar or M26 connection screw.

39.67 €

Apeks DIN 300Bar or M26 connection screw. DIN 300Bar connections are available in three options: Option 1: Glossy finish Option 2: Matte finish Option 3: Rubberized finish Option 4 corresponds to the M26 connection for Nirox and / or Oxygen. The new model is totally metal, see the attached picture Choose the appropriate one from the drop-down menu

View

Fuera de Stock

Product available with different options

Spare parts and kits

Apeks DIN adapter and connection

65.00 €

Apeks DIN 300Bar or M26 connection kit for first stages.Each one of the options comes provided with all the necessary parts for its assembly (see all the parts at the attached photo). DIN 300Bar connections are available in three options: Option 1: Glossy finish Option 2: Matte finish Option 3: Rubberized finish Option 4 corresponds to the M26...

View

En Stock

Available

Spare parts and kits

Apeks DIN M26 O-Ring

RG912179

1.36 €

O-ring for M26 connection of Apeks 1st stages. O2 Clean It can be used in first stage DIN M26 connections from other brands, for this it is recommended to check measurement compatibility. Dimensions: Outside diameter 19mm Section: 2,5mmø

En Stock

Available

Spare parts and kits

Apeks Din Protector Cap

RA117141

9.92 €

El tapón Apeks para los reguladores de conexión DIN cuenta con un asiento donde alojar una junta tórica de recambio (incluida con la compra del tapón). Es una ingeniosa solución, ya que de esta maneras llevaremos siempre la junta con nosotros hasta el último momento, no dejaremos de bucear nunca por haber perdido la junta del DIN en el último momento...

Fuera de Stock

-20%

Out-of-Stock

APEKS

Apeks DS4 - XTX50

RS132111 + RT134113

388.76 € 485.95 €

View

En Stock

-20%

Available

APEKS

Apeks DS4 1st stage Nitrox DIN

RT134115

197.69 € 247.11 €

DS4 First stage Nitrox version Dry sealed system for cold water G5/8" (DIN) Nitrox Connection 100% O2 compatible 4 medium pressure ports 3/8 UNF 1 high pressure port 7/16 UNF

Fuera de Stock

-20%

Ask us about availability

APEKS

Apeks DS4 1st stage Nitrox M26

RT134117

197.69 € 247.11 €

DS4 First stage Dry sealed system for cold water M26 Nitrox Connection 100% O2 compatible 4 medium pressure ports 3/8 UNF 1 high pressure port 7/16 UNF

Fuera de Stock

On sale!
-20%

Ask us about availability

APEKS

APEKS DS4/ATX 40

RG117112

296.86 € 371.07 €

Fuera de Stock

Out-of-Stock

Spare parts and kits

Apeks DST 5th port

ra117113

32.00 €

View

En Stock

Available

inicio

Apeks DST Turret retain bolt

RG912307

12.85 €

Fuera de Stock

-24%

Ask us about availability

APEKS

Apeks DTS 1st stage

RT129112

238.05 € 313.22 €

The Apeks DST 5 Port 1st Stage is a swivel turret first stage that is environmentally sealed and plenty of hose routing options.

Fuera de Stock

-25%

Ask us about availability

OCTOPUS

Apeks Egress Octopus

RS113114

148.14 € 197.52 €

Fuera de Stock

Ask us about availability

Spare parts and kits

Apeks End Cap XTX200 Tungsten

RG912069

28.59 €

Apeks XTX200 and ATX200 Tungsten First Stages Sealed Chamber End Cap

En Stock

Available

Spare parts and kits

Apeks environmental decal

RG912347

0.93 €

Fuera de Stock

Out-of-Stock

Spare parts and kits

Apeks Environmental End Cap for several models

RG912068

15.00 €

Apeks 1st stage Environmental End Cap to use with: TEK3 FSR (XTX200) DST (XTX50) DS4

View

Fuera de Stock

Out-of-Stock

Spare parts and kits

Apeks environmental service decal

RG912347-fecha

0.93 €

View

Showing 37-72 of 856 item(s)