Fuera de Stock Ask us about availability ATOMIC AQUATICS ATOMIC AQUATICS Z2 FIRST STAGE AT-01-0062-4P-S 330.54 € Add to cart
Fuera de Stock Ask us about availability ATOMIC AQUATICS Atomic Aquatics Z2 Octopus AT-02-0360-3P 239.63 € Add to cart
En Stock Available Spare parts Atomic Aquatics, 2nd stage LP seat AT-02-0008-2P 9.50 € NOTE: the maintenance of the regulators must always be carried out by suitably qualified personnel, otherwise there is a great risk of malfunctioning of the equipment with the obvious dangers derived from this situation, that is why the spare parts that require regulator disassembly to be replaced, are only available to authorized / qualified... Add to cart
Fuera de Stock Ask us about availability Spare parts Atomic Aquatics, Jam Nut AT-02-0037-00 16.52 € Spacer with 9/16 "thread for hose entry to the Atomic Aquatics second stages Add to cart
En Stock Available Spare parts Atomic Aquatics, M1 exhaust defletor at-02-0087-00 22.00 € Atomic Aquatics M1 Wide Exhaust T Deflector. Since the dawn of diving, divers have sought ways to keep exhaust bubbles away from their field of view. Add to cart
Fuera de Stock Out-of-Stock Spare parts Atomic Aquatics, Orifice sleeve 2nd stage 02-0036-00 8.90 € NOTE: the maintenance of the regulators must always be carried out by suitably qualified personnel, otherwise there is a great risk of malfunctioning of the equipment with the obvious dangers derived from this situation, that is why the spare parts that require regulator disassembly to be replaced, are only available to authorized / qualified... View
Fuera de Stock Ask us about availability Spare parts Atomic Aquatics, second stage diaphragm 02-0002-2P 16.52 € Main diaphragm for second stages Atomic Aquatics. Add to cart
Fuera de Stock Ask us about availability ATOMIC AQUATICS Atomic B2 + Z2 octopus AT-03-0027-4P + AT-02-0360-3P 670.25 € Add to cart
En Stock Available Boat Emergency Kits Backpack For Single Tank ACC-BCD-0001 38.83 € Backpack to assemble the tank quickly and simply to be able to carry out simple operations. Ideal for boats in order to be able to inspect the hull, untangle propeller lines, unscrew the anchor, etc... The body is made of ultra resistant plastic and has a harness to be able to fix and adjust it to the body and a tank holder strap to be able to firmly hold... Add to cart
En Stock Available REGULATOR ACCESORIES Blind Plug UNF 1/2" incl. o-Ring for 1st stage A13910607 5.88 € UNF 1/2" blind plug for LP outlet of 1st stage regulator. Some older Mares and Apeks 1st stages had an LP output with that thread pitch, it was/is the output intended for the main 2nd stage. Add to cart
En Stock Available 24-48h Tools and grease Blower adaptable to quick connect hose, Cressi EJA 900001 18.18 € Low pressure blower connectable to any LP inflator. Very useful for cleaning or drying delicate equipment items. Adjustable flexible tip. Ixox ring and plastic carabiner. Add to cart
Fuera de Stock -40% Product available with different options Spare parts-kits Boquilla Mares Jax Termomoldeables Boquilla Mares Jax 17.33 € 28.88 € The Mares Jax Mouldable mouthpiece for your regulator are certainly not cheap but once fitted you will realise what you spent your money on! Designed by an actual orthodontist and allows you to mould your mouthpiece to your own individual mouth and teeth shape. Simply immerse JAX in boiling water for a few seconds and then clamp it between your teeth to... View
Fuera de Stock -20.8% Ask us about availability Spare parts-kits Boquilla Mares Jax Termomoldeables Junior 415354 18.98 € 23.97 € The famous mares Jax mouthpiece, now, in a smaller size!!! The Mares Jax Mouldable mouthpiece for your regulator are certainly not cheap but once fitted you will realise what you spent your money on! Designed by an actual orthodontist and allows you to mould your mouthpiece to your own individual mouth and teeth shape. Simply immerse JAX in boiling... Add to cart
Fuera de Stock Ask us about availability CONTROL INSTRUMENTS BtS Pressure Gauge (SPG) 52mm A14115803 54.62 € BtS GAUGE Clean for O2 gauge 52mm diameter Hardened mineral crystal Sphere luminescent Finished nickel Add to cart
En Stock Available CONTROL INSTRUMENTS BtS Pressure Gauge (SPG) 63mm A14115804 51.26 € GAUGE BtS Clean for O2 gauge 52mm diameter Hardened mineral crystal Sphere luminescent Finished nickel Add to cart
En Stock Available BUNGEE MOUNTS/COMPASS BUNGEE in 4, 5, 6 and 8mm 1.12 € Price per meter Add to cart
En Stock Available chemicals Christolube® grease (57 gr/2 oz ) 3403.99.0000 57.80 € Oxygen compatible grease for use with any of your oxygen equipment. Christo-Lube MCG 129 is surely the best grease (civil use) you can use for the maintenance of your rebreather or any other oxygen equipment you have (regulators, o-rings, etc.) Add to cart
Fuera de Stock Out-of-Stock Spare parts Combi Inflator tool 80056 4.00 € Tool to be able to disassemble the inflator end and perform its maintenance. The tool also incorporates the notches to disassemble the knobs of the tanks valves View
En Stock Available (48-72h) Spare parts Combi Inflator tool DT-20 7.60 € Tool to be able to disassemble the inflator end and perform its maintenance. The tool also incorporates the notches to disassemble the knobs of the tanks valves Add to cart
Fuera de Stock Ask us about availability Service kits and O-Rings Complete O-Rings kit jnt-box-0001 39.67 € Complete kit with viton and standard O-Rings for: the neck of the tank, the HP nipples, for regulator hoses both terminals, for HP hoses, 2 sizes for regulator DIN connection, HP nipples, schrader valves for the inflator hose with its specific tool and 2 INT racors... Add to cart
En Stock Available Service kits and O-Rings copy of JNT-NBR-0004 3.90 € 20 units of O-Rings for the 9/16" terminal of the regulator hose (the O-Ring that goes into the terminal of the regulator hose that enters the 2nd stage) Add to cart
En Stock Available Spare parts and kits copy of Apeks HP Valve seat valve RG912236 14.52 € Valve (HP piston) suitable for all 1st stages Apeks Add to cart
Fuera de Stock Out-of-Stock Spare parts-Kits Cressi 1st stage Poppet valve EHZ 800085 13.22 € Valve for 1st stages Cressi with compensated diaphragm. Works with: MC5 MC7 MC8 MC9 T10 View
En Stock Available CRESSI Cressi 1ªetapa MC9 EHZ 820098 125.62 € Ellipse Titanium comes online in the 1st stage membrane MC9 overcompensated, very modern but at the same time, easy to maintain and very robust and reliable. Add to cart
En Stock Available inicio Cressi 2nd Stage Valve Seat Body for... EHZ 810094 4.05 € Ellipse, Ellipse Balanced and XS 2nd Stage Valve Seat Body Add to cart
Fuera de Stock -15% Out-of-Stock Cressi 2º stage Cressi 2ª stage MASTER Cromo EHZ 200012 185.45 € 218.18 € Performance, ergonomic reliability, and ease of maintenance make this regulator a product for true diving professionals. Instructors, guides, dive operators, and researchers will find the answer they need in the Master Ellipse. View
En Stock Available Service kits and O-Rings Cressi AC2 DIN 1st stage maintenance kit EHZ 730149 16.00 € The maintenance kit contains all the O-rings as well as the parts to be replaced (piston, valve, membranes, etc ...) that correspond to each model. NOTE: the image may not exactly match the product, it is shown only for illustration. Add to cart
En Stock Available Service kits and O-Rings Cressi AC2 INT 1st stage maintenance kit EHZ 730150 13.22 € The maintenance kit contains all the O-rings as well as the parts to be replaced (piston, valve, membranes, etc ...) that correspond to each model. NOTE: the image may not exactly match the product, it is shown only for illustration. Add to cart
Fuera de Stock Ask us about availability CRESSI Cressi AC25 1st stage Cressi AC25 185.12 € Without any doubt, a 1st stage that should never have left the Cressi catalog. The new Cressi AC25 does not hide its origings, from the ashes of the old AC10 and completely renewed, Cressi presents the new AC25. A 1st stage that will satisfy the needs of many divers who either wished for a compensated piston stage, or needed a stage that would offer us an... View
En Stock Available Service kits and O-Rings Cressi AC9-AC10 DIN 1st stage maintenance kit EHZ 735052 18.18 € The maintenance kit contains all the O-rings as well as the parts to be replaced (piston, valve, membranes, etc ...) that correspond to each model. NOTE: the image may not exactly match the product, it is shown only for illustration. Add to cart
En Stock Available Service kits and O-Rings Cressi AC9-AC10 INT 1st stage maintenance kit EHZ 735050 18.18 € The maintenance kit contains all the O-rings as well as the parts to be replaced (piston, valve, membranes, etc ...) that correspond to each model. NOTE: the image may not exactly match the product, it is shown only for illustration. Add to cart
En Stock Available Service kits and O-Rings Cressi AirPlus, XS, XS2/1 2nd stage maintenance kit EHZ 790090 11.57 € The maintenance kit contains all the O-rings as well as the parts to be replaced (piston seat, membranes, etc ...) that correspond to each model. NOTE: the image may not exactly match the product, it is shown only for illustration. Add to cart