BACKPLATES/WINGS

Halcyon

OMS

DTD

Apeks

XDEEP

ScubaForce

Scubapro

Dive Rite

Mares

Cressi

Hollis

TECLINE

IST

J.Dive Systems

Accesories / Weight

Harness & Backplates

Complete single gear

Doubles tanks complete gear

Accessories

Spare parts

Gadgets

Tools

En Stock

Spare parts

DTD inflator end piece X01K

DTD 3401

32.26 €

En Stock

Accesories / Weight

DTD Inner pocket spare part

13.14 €

En Stock

Available

Tools

DTD J01 end inflators tool

DTD 3433

11.00 €

Tool for disassembling and tightening the NEW extra flat overpressure valves and elbows of the DTD wings

En Stock

Available

Tools

DTD J01 Inflator maintenance kit

DTD 3428

78.15 €

Essential tool kit for the correct maintenance of model J01 inflator controls, used in some of the DTD wings and some other brands Includes semi-round nose pliers cone for loading button O-Ring bush wrench, lubricant 5-mm Allen wrench 8-mm Allen wrench set of O-rings for 10 services

En Stock

Available

Spare parts

DTD knee joint with screwed fitting Inflator low profile

DTD 3423

14.45 €

DTD, inflator - knee joint with screwed fitting low profile

En Stock

Available

Spare parts

DTD OPV Inflator - safety valve 1,2 (OPV - low profile)

DTD 3424

10.27 €

New generation DTD wings overpressure valve outer part, not suitable for wings with standard OPV

En Stock

Available

DTD

DTD PA webbing 50 mm - 4 m

DTD 2105

14.05 €

Special-made, hard, very resistant strap for backplate with a grommet for a screw.

En Stock

Available

DTD

DTD Ring 12

207.11 €

Lightweight ring model wing for juniors, volume 12 litres. Double-shell construction but the cover is made of lighter material Cordura 1000 red colour. Inflator end-piece is SHARK which is more suitable for smaller hands, softer to press the buttons . Part of the wing are also 2 pieces of rubber pins in the middle area of wing which allow to attach the...

En Stock

Available

DTD

DTD Ring Stripe 14 / 17

208.30 €

Circular style wing for diving with a single tank. Comes out from time proven double layer model CUB. Use for single tank 12 l. Part of the wing are also 2 pieces of rubber pins in the middle area of wing which allow to attach the single bottle WITHOUT the need to use single tank adapter.INCLUDED in delivery- 1x inflator LP hose 51 cm- 1x screw set for...

En Stock

Available

Accessories

DTD shoulder pads - pair

DTD 2215

11.60 €

shoulder pads - pairComfortable shoulder pads

En Stock

DTD

DTD SIDEMOUNT BACK PAD

DTD 2206

35.65 €

sidemount back padAdditional rear part of backplate for attaching the sidemount bottles.

En Stock

Accessories, additional gear

DTD Small back pad / buoy pocket

DTD 2200-S

30.82 €

DTD KIDDO Back Pad for Small DTD Backplates (NOT SUITABLE for standard-sized backplates) The DTD Back Pad is designed to accommodate a safety or lifting buoy between the backplate and the diver's back. It also protects the back from potential chafing caused by the screws that attach the backplate to the fin. It comes with stainless steel screws for...

En Stock

Available

Accesories / Weight

DTD Trim pocket

DTD 2005

9.08 €

En Stock

Available

DTD

DTD Trim pockets for backplate

DTD 2006

12.39 €

Small pockets for attachment to the backplate. Each pocket can carry one piece of weight block (dimensions 8x10x3 cm, 1,5-2 kg).Price is for 1 unit

En Stock

Available

DTD

DTD Weight belt with s-s buckle

DTD 2023

12.08 €

Polypropylene strap 1,5 m with integrated stainless-steel buckle.

En Stock

Available

DTD

DTD Weight inner pocket DOWN-DROP

11.49 €

This is the spare part for the dropdown weight pocket system. There are 2 options: Big:: can carry 2 pcs of standard sized 1,5-2 kg lead blocks. Small: can carry one piece of standard sized 1,5-2 kg lead block.

En Stock

Available

DTD

DTD weighting system DOWN-DROP

69.09 €

Ballast system consists of 2 pockets, which are slipped on a waist strap and fastened to a backplate. Left pocket has a D-ring for mounting a pressure gauge. Inside each pocket is an inner pocket with a handle for inserting the weights. Especially suitable for slim people, and if you need to save some space on your waist strap.

En Stock

DTD Weighting system for single bottle 2

Available

DTD

DTD Weighting system for single bottle

DTD 2001

75.36 €

Ballast system consists of 2 pockets, which are slipped on bottle straps, they include inner throw-away pockets for 2x 3 kg weights. material: Cordura 1100, velcro weight: 0,44

En Stock

Available

Tools

DTD X01 end inflators tool

DTD 3431

15.00 €

Tool for disassembling and tightening the NEW extra flat overpressure valves and elbows of the DTD wings

En Stock

Available

Tools

DTD X01 Inflator maintenance Tool kit

DTD 3415

78.15 €

En Stock

Available

DTD

DTD, Aluminium 3mm Backplate

DTD 3002

107.33 €

Dural backplate made of aluminium alloy resistant to salt water. Backplate is hard anodized. Edges bevelled on a NC cutter. Thanks to low weight of 0,75 kg it is ideal for travelling by plane.

En Stock

Available

DTD

DTD, Backplate Aluminium 3 mm SHORT

DTD 3033

107.33 €

Dural backplate made of aluminium alloy resistant to salt water. Backplate is hard anodized. Edges bevelled on a NC cutter. Thanks to low weight of 0,59 kg it is ideal for travelling by plane.ould dilacerate the strap.Length: 355 mmWidth: 238 mmWeight: 0,59 kgPitch between middle holes: 280 mm (11 inches)

En Stock

Available

Accesories / Weight

DTD, Bolsillo adicional

DTD 2204

23.34 €

En Stock

Available

COMPLEMENTS

DTD, bottle strap with plastic buckle

DTD 2107

16.12 €

DTD bottle strap with high quality plastic buckle. Composed of a strap with a perfect balance between hardness and perfect malleability, a plastic buckle and a ring made of AISI 316 stainless steel. The strap has an anti-slip band on the inside to provide an extra grip. After having tried a multitude straps of this type, we dare to say that this is...

En Stock

DTD

DTD, Short SS Backplate

DTD 3031

116.69 €

Stainless-steel backplate 3 mm made of salt water resistant stainless-steel. Edges bevelled on a NC cutter, manually polised for perfect flattening of sharp edges, which could dilacerate the strap.It is 43 mm shorter and 25 mm narrower than normal size backplate, suitable for not so big people :-)

En Stock

DTD

DTD, SS 3mm Backplate

DTD 3000

116.69 €

Stainless-steel backplate 3 mm made of salt water resistant stainless-steel. Edges bevelled on a NC cutter, manually polised for perfect flattening of sharp edges, which could dilacerate the strap.

En Stock

Available

Spare parts

Elbow Assembly with OVP with cable

28.10 €

Elbow Assembly with OVP with cable suitable. There are 3 lengths options for the cable: 33cm 40cm 48cm

En Stock

Available

Spare parts

Elbow O-Ring

DTD-Jun-Cod

2.48 €

Elbow O-Ring for DTD wings.

En Stock

Available

Spare parts

Elbow O-Ring

0.83 €

Replacement O-ring for the trachea elbow. OPTION 1: Wings manufactured after 2015. (Dimensions: outside 40mmø, inside 30mmø and 3.8mm thick) OPTION 2: Wings manufactured before 2015 and also for Halcyon, Dive Rite, IST, Xdeep, Hollis, EDGE, HOG ... (Dimensions: Outside 38mmø, Inside 25mmø, and 3mm thick) Choose the appropriate one you need from the...

En Stock

Available

Spare parts

Elbow OMS (newest version, universal)

A11918023

4.21 €

The newly designed OMS elbow can be used in any wing of the most common such as, obviously, all OMS, halcyon, Edge, Xdeep, Dive Rite, etc ... if you have any questions, ask us. To this new design has been added a very marked stretch mark, in this way the trachea is much more secured once installed and even losing the flange it is highly unlikely that the...

En Stock

Available

Spare parts

Elbow universal

A11918023-uni

4.29 €

Universal elbow suitable for a multitude of brands such as: Halcyon Dive Rite Hollis Tecline OMS Contact us if you have questions about compatibility with your wing

En Stock

Available

Spare parts

End Inflator Mouthpiece

AC-024-0

9.92 €

Replacement mouthpiece for wing end inflator: Xdeep, Dive Rite, Halcyon, OMS, Hollis, Tecline…

En Stock

Available

Spare parts

EPDM Rubber Band for Harness

A11918011

1.65 €

En Stock

Available

Miscellaneous

Extensible clip with swivel

Cordon extensible

14.05 €

Extensible clip with swivel snap hook and stainless steel ring.On one end includes a steel key ring in order to set and hold onto surface; the other includes a plastic carabiner to hold to a BD ring or another part of the diving gear. With its easy extension, it allows diver to use cameras, lighst or other accessories without having to let go.Available...

En Stock

Miscellaneous

Extensible clip with swivel

Cordon extensible

12.69 €

En Stock

Spare parts

External screw outlet flange

DTD 0000

5.00 €

DTD, inflator - screw outlet flange Female thread to place/fit the inflator elbow Works with wings DTD, ATS, Golem, DUX, Dir Zone, Scuba Force and some Mares wings

Showing 73-108 of 550 item(s)

Product added to wishlist