STEEL HARDWARE

En Stock

Available

COMPLEMENTS

Stainless steel tank clamp W5

5.79 €

6 sizes available: 70mm a 90mm (XS) 90mm a 110mm (S) 100mm a 120mm (M) 120mm a 140mm (L) 140 a 16mm (XL) 170 a 190mm (XXL)

En Stock

Available

STEEL HARDWARE

stainless-steel belt buckle

A21910601

7.44 €

En Stock

Available

STEEL HARDWARE

Stainless-steel D-Ring Bend

DTD 3012

2.36 €

Made of marine grade steel, 316L Ring thread: 4.8mmø Interior width in the widest areas: 55mm x 42mm

En Stock

Available

STEEL HARDWARE

stainless-steel stopper large

DTD 3018

2.24 €

En Stock

Available

STEEL HARDWARE

Steel compression Latch

DTD 3020

14.00 €

Steel latch commonly used on battery canisters, scooters, rebreather canisters, and similar items. Its push-to-close mechanism makes it ideal for securely sealing all types of watertight containers.

En Stock

Available

STEEL HARDWARE

Steel Grower washer 8mm

jdive1005

0.50 €

Steel Grower washer with 8mm pitch

En Stock

Available

STEEL HARDWARE

Steel screw, 20mm length, M8

DTD 3022/1

0.99 €

M8 screw with a 20mm threaded length A4 stainless steel

En Stock

Available

STEEL HARDWARE

Steel screw, 25mm length, M8

DTD 3025/1

1.07 €

M8 screw with a 25mm threaded length A4 stainless steel

En Stock

Available

STEEL HARDWARE

Steel washer 6mm

jdive1004

0.50 €

Steel washer with 6mm pitch

En Stock

Available

STEEL HARDWARE

Teflon washer

jdve0027

1.00 €

Teflon washer especially indicated for aluminum backplates in order to prevent the contact of the steel screws with the backplate. Perfectly suitable also for use on steel backplates as a washer without more ... 1mm thick x 16mm in diameter. Suitable for screws up to 8mmø

En Stock

Available

STEEL HARDWARE

Tri Gilde Billy Ring Large

SFAC1042

9.92 €

Welded/fiexed D-Ring ring with a greater height than standard (44 mm in this case) for 50 mm cinch straps.

En Stock

Available

Accessories

Tri glide 50mm with attachment port

SFTGP

6.20 €

Inner diameter of the port: 16mm

En Stock

Available

Accessories

Tri glide butt wide double port 50mm

SFTGBD

12.40 €

Retainer with fixed dual port bent D-Ring

En Stock

Available

STEEL HARDWARE

Trim bar glider "T" type

80135

3.86 €

Multipurpose "T" type stainless steel retainer. Dimensions of the slots up to use with standard 5cm wide webbing.

En Stock

Available

STEEL HARDWARE

Trim bar glider with double Ring

80313

3.30 €

Stainless steel retainer for 5cm webbing with rings on both sides. Exterior measure: 57mm x 33mm Slots measure: 52mm x 6mm Interior measure of the rings: 25m x 19mm Thickness: 1.5mm

En Stock

Available

STEEL HARDWARE

Welded D-ring welded

ETA 650002

7.44 €

Fixed welded D-ring for 5cm webbing

En Stock

STEEL HARDWARE

Wing nut M10 SS A4

jdive1003

0.82 €

Wing nut Metric 10mm made of SS A4

En Stock

Available

STEEL HARDWARE

Wing nut M8 SS A4

DTD 3029

0.68 €

wing nut M8 A4

En Stock

Available

STEEL HARDWARE

Xdeep NX Series boltsnap

AC-016-0

9.92 €

A completely new shape of the head prodvides better support for the finger and more assured grip. A larger opening, a perfectly slim hook part of the head and a large trigger makes clipping amazingly easy, especially in thick gloves. Finally, the weight to strength ratio has been optimized to make it over 30% lighter than a regular bolt snap. made of...

En Stock

Available

STEEL HARDWARE

Xdeep NX Series boltsnap for regulator

AC-012-0

8.26 €

En Stock

Available

STEEL HARDWARE

Xdeep NX Series boltsnap for stage

AC-013-0

9.92 €

En Stock

Available

Spare parts

Xdeep Stainless Steel weight belt buckle

HA-013-0

8.26 €

En Stock

Available 24-48h

Accessories

Xdeep STEALTH 2.0 back D-ring set

HA-052-0

12.40 €

The Back D-rings for the Stealth 2.0 are the square D-rings that extend off the waist band, which are used for the lower tank conection point (unless using a butt plate). Additional Back D-rings can be useful for additional stage tanks or accessories, on the Stealth or any other technical diving harness. The Back D-Rings have four slots for threading onto...

Fuera de Stock

Ask us about availability

STEEL HARDWARE

Adjustable D-Ring with bungee

80208

6.00 €

Adjustable stainless steel ring with standard 5cm wide slot, already bungee mounted Ideal for quick position adjustment

Fuera de Stock

Ask us about availability

Apeks wings Spare parts

Apeks 3/4 wings screw Set

BT115119

48.76 €

Apeks screw set for mounting wing gears (accopling wing to backplate). Made of stainless steel, they have a 20mm long screw. The inner faces of the threads have a rubber gasket that prevents them from unscrewing by themselves. Widths can be set from 25mm to 16mm. The minimum width they reach is 11mm but from 16 onwards, the stud protrudes from the rear.

Fuera de Stock

Ask us about availability

STEEL HARDWARE

D-Ring 50mm x 47mm

80129

1.83 €

Flat Stainless Steel D-Ring with interior dimensions in its widest parts of: 51mm wide x 49mm long Thread diameter 5mm

Fuera de Stock

Ask us about availability

STEEL HARDWARE

D-Ring Bend

80130

2.01 €

Bend Steel D-Ring with interior dimensions in its widest parts of: 51mm wide x 47mm long Thread diameter 5mm

Fuera de Stock

Ask us about availability

STEEL HARDWARE

D-Ring perfil bajo

80136

2.33 €

Flat SS D-Ring with interior dimensions in its widest parts of: 51mm wide x 26mm long Thread diameter 5mm

Fuera de Stock

Halcyon Stainless Steel Halycon weight belt buckle

Ask us about availability

Spare parts

Halcyon Stainless Steel Halycon weight belt buckle

62.040.010

22.00 €

Fuera de Stock

Ask us about availability

STEEL HARDWARE

Ladder ring

80083

3.30 €

Ring to mount on the belt as shown in the photo. Its measures are: Totals: 38 x 99mm Internal measurement of the useful part: 33 x 28 mm. NOTE: The price is for a single unit. The double photo is by way of illustration.

Fuera de Stock

-10%

Ask us about availability

STEEL HARDWARE

Mares Dead Bolt Snap Pro 80mm

415752 - 80MM

14.84 € 16.49 €

Its wide eye facilitates its operation and the specifically designed trigger prevents tangling and is very easy to use even with dry gloves. High quality 316 grade marine grade stainless steel

Fuera de Stock

-15%

Ask us about availability

STEEL HARDWARE

Mares Double Ender Pro 105mm

415751 - 105MM

14.02 € 16.49 €

Its wide eye facilitates its operation and the specifically designed trigger prevents tangling and is very easy to use even with dry gloves. The multi-function holes offer us additional functions High quality 316 grade marine grade stainless steel

Fuera de Stock

-10%

Ask us about availability

STEEL HARDWARE

Mares Double Ender Pro 120mm

415751 - 120MM

16.33 € 18.14 €

Fuera de Stock

Ask us about availability

Spare parts

Slide Tri Glide

SFSTG

4.13 €

Slide tri glide for 50mm webbing.It can be use for different applies, one of them and the most demanding is mounting it on the back of the back plate, making the cinch able to run over it and making the harness infinitely adjustable.

Fuera de Stock

Triglide with Sawtooth Bar and fixed D-Ring

Ask us about availability

Hardware

Triglide with Sawtooth Bar and fixed D-Ring

417552

22.27 €

50MM TOOTHED AND CURVED TRIGLIDERS MARES, ALUMINIUM

Fuera de Stock

Ask us about availability

Hardware

Triglide with Sawtooth Bar and fixed D-Ring

417553

22.27 €

MARES 50MM TOOTHED AND CURVED TRIGLIDERS, STAINLESS STEEL

Showing 73-108 of 122 item(s)

Product added to wishlist