STEEL HARDWARE

En Stock

Available

Hardware things...

Aluminium D-Ring 50mm

A24518004

5.80 €

En Stock

Available

STEEL HARDWARE

aluminium whistle red

DTD 3311

2.42 €

Aluminium whistle red

En Stock

Available

Apeks wings Spare parts

Apeks 3/8 Book Screw set

BT115118

59.00 €

En Stock

Available

STEEL HARDWARE

belt stop serrated SS

DTD 3017

1.57 €

Fuera de Stock

Product available with different options

STEEL HARDWARE

Bolt Snap Stainless Steel 316L

7.99 €

316L Steel bolt snaps. Its high quality not only in the exterior steel and finish but also in the spring used makes them a very smooth operation. 4 sizes available: 90mm: 21mm x 11mm eye and 20mm x 15mm ring 100mm: 21mm x 11mm eye and 23mm x 21mm ring 110mm: 21mm x 11mm eye and 37mm x 34mm ring Choose the desired size from the drop-down menu

View

En Stock

Available

STEEL HARDWARE

Bolt Snap Technical, Stainless Steel 316L

13.39 €

316L Steel bolt snaps. Its high quality not only in the exterior steel and finish but also in the spring used makes them a very smooth operation. Its large anti-snag trigger allows us to use them with any type of gloves or without them, comfortably and precisely. The eye design makes them quick to clip. The three options have the same body size, differing...

En Stock

Available

STEEL HARDWARE

Bolt snap, stainless steel

7.01 €

Four sizes available: S: 64 mm length 16 mm ø approx. for the Eye and 11mm ø for the end ring M: 80 mm length 18 mm ø approx. for the Eye and 16mm ø for the end ring L: 92mm length 21 mm ø approx. for the Eye and 19mm ø for the end ring XL: 117 mm length 18 mm ø approx. for the Eye and 34mm ø for the end ring

En Stock

Available 24-48h

STEEL HARDWARE

Book screw tool

A11918097

2.00 €

Specific tool to facilitate the screwing-unscrewing operation of the Book screw set for backpad, backplate, argon systems, etc It is sold individually but two pieces are recommended to facilitate the work Link to the Screw set

En Stock

Available

STEEL HARDWARE

Buckle for adjustable harness, s-s

DTD 3005

9.46 €

En Stock

Available

BUNGEE MOUNTS/COMPASS

BUNGEE in 4, 5, 6 and 8mm

1.36 €

Price per meter

En Stock

Available

inicio

Cover for Book Screw nut flat

A11818019

0.97 €

Rubber cover for Book Screw nut flat 1/4" Link to the Book Screw nut NOTE: The price corresponds only to the rubber cover, the visible nut in the photo is for illustrative purposes

En Stock

Available

STEEL HARDWARE

Cressi Asymmetric Carabiner, 316L Stainless Steel

EJA 200004

22.00 €

En Stock

Available

STEEL HARDWARE

Cressi Asymmetrical Aluminum Carabiner with Stainless Steel closure

Alu-Inox

3.00 €

Asymmetrical aluminum carabiner with stainless steel closure for saltwater resistance. Available in two sizes: 60mm (S) 80mm (L) Select the appropriate size from the drop-down menu.

En Stock

Available

STEEL HARDWARE

Cressi bolt snap

9.99 €

316L Stainless Steel bolt snap with high-strength springs, easy-to-use triggers, and anti-snag protection. Available in two sizes: the small (S) is ideal for use with hoses, flashlights, etc., while the large (L) is perfect for use with thick gloves, as its large eye allows for easy handling. S: 87mm L: 105mm Select the appropriate size from the...

En Stock

Available

STEEL HARDWARE

Cressi double ender bolt snap Stainless Steel 316

12.00 €

The new Cressi double ender snap features a very smooth-action spring; combined with a snag-free gate design, this ensures quick, comfortable, and precise operation without snagging. Available in three sizes: S: 91mm M: 105mm L: 121mm

En Stock

Available

STEEL HARDWARE

Cressi double ender bolt snap Stainless Steel 316 Black

11.00 €

316L stainless steel double ender bolt snap with high-strength springs, finished in black. Available in three sizes: S: 90mm M: 100mm L: 115mm Choose the appropriate size from the drop-down menu.

Fuera de Stock

Ask us about availability

STEEL HARDWARE

Cressi Stainless Steel Keyring

Alu-Inox

0.90 €

Available in two options, both 25mm in diameter: Item 1: Oval Item 2: Round Select the appropriate one from the drop-down menu.

En Stock

Available

Buoys

Cressi Whistle

EIZ 750013

4.01 €

En Stock

Available

STEEL HARDWARE

D-Ring 50mm Flat

DTD 3011

2.75 €

Made of marine grade steel, 316L Ring thread: 4.8mmø Interior width in the widest areas: 55mm x 42mm

En Stock

Available

STEEL HARDWARE

d-ring welded on triglide

DTD 3014

5.40 €

En Stock

-20%

Available

STEEL HARDWARE

D-Rings Bent SS316 Mares XR Line

417526-uni

3.16 € 3.94 €

Mares D-Ring Bent Stainless Steel 316

En Stock

Available

Hardware

D-Rings FLAT SS316 Mares XR Line

417525

3.94 €

Mares D-RIng Flat 50mm wide

En Stock

Available

STEEL HARDWARE

DTD stainless-steel belt buckle

DTD 3004

9.87 €

stainless-steel belt buckle High-quality stainless-steel buckle.

En Stock

Available

STEEL HARDWARE

DTD stainless-steel bolt-snap

6.80 €

DTD Bolt-snap in two sizes: Stainless-steel bolt-snap small for backup torches and small things attaching to a loop in pocket, etc. Length is 75 mm, the eye is 9 mm wide. And Stainless-steel bolt-snap for pressure gauge, long hose, etc. The eye is 20 mm wide The other bolt-snap is 114mm long and 40mm wide for the eye.

En Stock

dtd-stainless-steel-double-end-snap-long

Available

STEEL HARDWARE

DTD stainless-steel double end snap long

9.33 €

Stainless-steel double end snap Stainless-steel double end snap, all-round use for fastening various equipment, overall length 100 mm or 120mm

En Stock

Available

STEEL HARDWARE

Extra wide ladder ring

DTD 3026

9.15 €

Ring to mount on the belt as shown in the photo. Its measures are: Totals: 53 x 90mm Internal measurement of the useful part: 43 x 23mm NOTE: The price is for only one unit. The double photo is by way of illustration.

En Stock

STEEL HARDWARE

Halcyon Adjustable Crotch Strap with Front & Rear D-Rings

10.050.003

48.40 €

Replaces or Adds to any Halcyon Secure Harness System (or any other harness brand). Keeps the BC unit Secure on the Diver in any Position

En Stock

Available

Hardware things...

IQ Lite screw (Nylon) 6 pieces

A11918074

8.00 €

En Stock

Accessories

Ladder ring

TEC-DR-8

8.99 €

Ring to mount on the belt as shown in the photo. Its measures are: Totals: 38 x 99mm Internal measurement of the useful part: 33 x 28 mm. NOTE: The price is for a single unit. The double photo is by way of illustration.

En Stock

Accessories

Light battery holder

HA-026-0

15.00 €

Fuera de Stock

-25%

Ask us about availability

STEEL HARDWARE

Mares Bolt dead snap Ceramic

Mosquetones giratorios Mares XR cerámicos

16.46 € 21.95 €

Mares XR dead bolt snap in high quality 316L stainless steel with black ceramic coating Available in 2 sizes: Small (S): 75mm Large (L): 120mm Choose the required one according to S or L in the drop-down menu

En Stock

-30%

Available

Hardware

Mares D-RIng for adjustable harness

417522

13.97 € 19.95 €

Sliding ring to mount on the lower part of the backplate, allowing the harness web to run freely, making this an adjustable continuous webbing harness

En Stock

-10%

Available

STEEL HARDWARE

Mares Dead Bolt Snap Pro 110mm

415752 - 80MM

17.96 € 19.95 €

Its wide eye facilitates its operation and the specifically designed trigger prevents tangling and is very easy to use even with dry gloves. High quality 316 grade marine grade stainless steel

En Stock

-20%

Available

Hardware

Mares Triglide with Sawtooth Bar

417524-uni

18.36 € 22.95 €

Triglide with Sawtooth Bar to use on 50mm wide cinch

En Stock

Available

STEEL HARDWARE

Mares XR dead bolt snap

Mosquetones giratorios Mares XR

13.95 €

Mares XR dead bolt snap in high quality 316L stainless steel Available in 2 sizes: Small (S): 75mm Large (L): 120mm Choose the necessary one according to S or L in the drop-down menu

Fuera de Stock

-25%

Product available with different options

STEEL HARDWARE

Mares XR double ender bolt snap

Mosquetones dobles Mares XR cerámicos

18.71 € 24.95 €

Mares XR dead bolt snap in high quality 316L stainless steel with black ceramic coating Available in 3 sizes: Small (S): 90mm Medium (M): 100mm Large (L): 120mm Choose the necessary one according to S, M or L in the drop-down menu

View

En Stock

-18%

Available

STEEL HARDWARE

Mares XR double enders carabiners

Mosquetones dobles Mares XR

14.71 € 17.94 €

Mares XR double enders carabiners in high quality 316L stainless steel Available in 3 sizes: Small (S): 90mm Medium (M): 100mm Large (L): 120mm Choose the necessary one according to S, M or L in the drop-down menu

En Stock

-18%

Hardware

Metal buckle SS316 - XR Line

417555

32.76 € 39.95 €

Safety stainless steel buckle for adjusting the harness, allows us to adjust the harness and release the strap for easier entry and exit from the equipment. NOTE: THE PRICE IS FOR ONE BUCKLE. THE PHOTO SHOWS TWO UNITS WITH THE INTENTION SHOW IT IN OPEN AND CLOSED

En Stock

OMS D-Ring 1" (~25 mm) stainless Steel , straight

Available

Hardware things...

OMS D-Ring 1" (~25 mm) stainless Steel , straight

A11910208

2.40 €

En Stock

OMS 2 in (5 cm) Stainless Steel D-Ring, ~ 45° bend

Available

Hardware things...

OMS 2 in (5 cm) Stainless Steel D-Ring, ~ 45° bend

A24510206

4.40 €

En Stock

Available

Hardware things...

OMS 2 in (~5 cm) Stainless Steel D-Ring

A11910209

4.40 €

En Stock

Available

Hardware things...

OMS 5 cm Alu D-Ring, bend

A24518003

6.30 €

En Stock

-10%

Available

STEEL HARDWARE

OMS BigGrip Double-Enders

9.99 € 11.10 €

Product Description Hardware in any size or configuration has always been a hunt for the best grip. Divers wearing thick neoprene or dry gloves can have difficulties manipulating gear clips. OMS BigGrip™ clips have an extended section on the gate that allows for easier use of the clip. Available on all size and style clips available from OMS. Standard on...

En Stock

Available

STEEL HARDWARE

OMS Book screw 1/4"

4.30 €

Screw (one unit) for mounting the wing with the backplate, Argon system, weight pockets, or,... etc... The screw is provided with an O-ring at the base in order, on the one hand, to prevent it from slipping and loosening and, on the other, to avoid direct pressure of the metal against the fixed part. 1/4" screw thread, available in 3 sizes: 12mm 18mm...

En Stock

STEEL HARDWARE

OMS Book Screw nut flat

A11818017

5.87 €

Female Screw (one unit) for mounting the wing with the backplate, Argon system, weight pockets, or,... etc... The screw is provided with an O-ring at the base in order, on the one hand, to prevent it from slipping and loosening and, on the other, to avoid direct pressure of the metal against the fixed part. 1/4" screw thread The male threads are sold...

En Stock

Available

inicio

OMS Book Screw nut flat 1/4"

A11818018

4.37 €

Female Flat Screw (one unit) for mounting the wing with the backplate, Argon system, weight pockets, or,... etc... SCREWS Rubber cover

En Stock

Available

Hardware things...

OMS D-Ring, 2,5 cm Aluminum

A24518006

2.30 €

En Stock

Available

STEEL HARDWARE

OMS Triglide with Sawtooth Bar

A11910211

1.90 €

En Stock

Available

Hardware things...

OMS Triglide, Stainless Steel

A11910210

1.69 €

En Stock

-15%

Available

Hardware things...

OMS weight belt buckle

16.07 € 18.90 €

Available in Stainless Steel or Aluminium

En Stock

-10%

Available

STEEL HARDWARE

OMS® BigGrip Bolt-Snaps

8.28 € 9.20 €

En Stock

Available

STEEL HARDWARE

Plastic slider, 50mm

HA60245020

1.36 €

Plastic slider with slots for 50mm webbing

En Stock

Available

COMPLEMENTS

Plastic Thumbwheel M8 x 1,25 (Pair)

18.00 €

Plastic Thumbwheels with stainless steel thread inserted. Designed to replace the butterfly nuts on DIR Style SteelBands, these thumbwheel allow an easier manipulation,also with Dive gloves. Available in two thread types: M8 x 1.25 (metric thread) 5/16 "x 18 (Imperial thread)

En Stock

Available

Accessories

Retainer with fixed D-Ring and port (pair)

SFSTGA

19.00 €

Inner diameter of the port: 16mm

En Stock

Available

Spare parts

Rubber ring for harness and D-Ring

A11918092

4.01 €

Rubber Ring with 8,0 mmø section, 50mm outer diameter and 85mm inner diameter.This ring is used in OMS wing equipment to keep the D-Rings of the pockets in a 90º position. It is also used in harnesses to stop different elements that we have mounted.

En Stock

Available

STEEL HARDWARE

Screw set for backplate

DTD 3022

3.92 €

Screw set for mounting wing to backplate. Suitable for backplate 3 mm.

En Stock

Available

STEEL HARDWARE

Screw set for buoy pocket

DTD 3021

7.20 €

Screw set for buoy pocket with. Suitable for backplate 3 mm.

En Stock

Available

STEEL HARDWARE

Screw set for STA

DTD 3025

4.15 €

Screw set for mounting STA to backplate. Screws are longer then screws for compensator, 25 mm instead 20 mm. Also suitable for wing with 6 mm backplate.

En Stock

Available

STEEL HARDWARE

Screw set for weighting system

DTD 3023

7.39 €

Screw set for weighting system. Suitable for backplate 3 mm.

En Stock

Available

STEEL HARDWARE

Scuba Force Cobra GT Buckle female

FG50MWF

19.00 €

The GT Cobra high strength polymer buckle system. designed to be more robust than any other type of plastic hardware on the market, with a targeted tensile load of 500lbf/2,2kN, the GT cobra buckle is a 100% Polymer system with no metal components.

En Stock

Hebilla Cobra GT ajustable (macho), Scuba Force

Available

STEEL HARDWARE

Scuba Force Cobra GT Buckle male, adjustable type

FG50MMV

19.00 €

En Stock

Scuba Force Cobra GT Buckle male, fixed type

Available

STEEL HARDWARE

Scuba Force Cobra GT Buckle male, fixed type

FG50MMF

15.00 €

En Stock

Available

inicio

Scuba Force Comfort Clip for adjustable harness

SF55410

15.00 €

Stainless steel angled pin for mounting adjustable harnesses, allowing it to be attached to the belt at an angle to the vertical strap. This angle allows the strap to move more smoothly, facilitating overall adjustment.

En Stock

Available

STEEL HARDWARE

Scuba Force double snap

9.99 €

Double stainless- steel snap Stainless-steel double end snap, all-round use for fastening various equipment. Available in two sizes: M: 100mm L: 117mm

En Stock

Available

STEEL HARDWARE

Sidemount tank holder

FB108X45X2

15.00 €

45 x 105mm

En Stock

Available

Accessories

Sliding D-Ring 50mm

DR50SLIDE

8.00 €

This D-Ring allows us to use it as a retainer for a classic D-Ring allowing us to move its position up and down, see attached photo as an example.

En Stock

Available

STEEL HARDWARE

stainless steel d-ring, low profile

DTD 3013

2.06 €

En Stock

Available

STEEL HARDWARE

Stainless Steel Eyelet 10mmø

8473

1.36 €

10mmø Stainless steel eyelet with for riveting.

En Stock

Available

STEEL HARDWARE

Stainless steel hose clamp

3.50 €

Stainless steel clamps for fixing the breathing hoses, or anything you need... Wide: 12mmTwo sizes available:30 to 45mm (S)32 to 50mm (M) ATTENTION: the price is for one unit.

En Stock

Available

STEEL HARDWARE

Stainless Steel Quick Link

6.00 €

Three sizes availables: Inner space 46mm x 15mm; 6mmØ thread; Maximum opening of the closing 8.5mmInner space 39mm x 13mm; 5mmØ thread; Maximum opening of closing 7.5mmInner space 33mm x 12mm; 4mmØ thread; Maximum opening of the closing 6mm Please, choose your size from the dropdown menu

En Stock

STEEL HARDWARE

Stainless Steel quick link

DTD 3019

2.98 €

Quick Link Quick-Link stainless-steel, dimensions 36 x 17 mm, diameter 3,5 mm, opening max 5 mm

En Stock

Available

STEEL HARDWARE

Stainless Steel stopper

80001

1.67 €

En Stock

Available

COMPLEMENTS

Stainless steel tank clamp W5

7.01 €

6 sizes available: 70mm a 90mm (XS) 90mm a 110mm (S) 100mm a 120mm (M) 120mm a 140mm (L) 140 a 16mm (XL) 170 a 190mm (XXL)

En Stock

Available

STEEL HARDWARE

stainless-steel belt buckle

A21910601

9.00 €

En Stock

Available

STEEL HARDWARE

Stainless-steel D-Ring Bend

DTD 3012

2.86 €

Made of marine grade steel, 316L Ring thread: 4.8mmø Interior width in the widest areas: 55mm x 42mm

En Stock

Available

STEEL HARDWARE

stainless-steel stopper large

DTD 3018

2.71 €

En Stock

Available

STEEL HARDWARE

Steel compression Latch

DTD 3020

16.94 €

Steel latch commonly used on battery canisters, scooters, rebreather canisters, and similar items. Its push-to-close mechanism makes it ideal for securely sealing all types of watertight containers.

En Stock

Available

STEEL HARDWARE

Steel Grower washer 8mm

jdive1005

0.61 €

Steel Grower washer with 8mm pitch

En Stock

Available

STEEL HARDWARE

Steel screw, 20mm length, M8

DTD 3022/1

1.20 €

M8 screw with a 20mm threaded length A4 stainless steel

En Stock

Available

STEEL HARDWARE

Steel screw, 25mm length, M8

DTD 3025/1

1.30 €

M8 screw with a 25mm threaded length A4 stainless steel

En Stock

Available

STEEL HARDWARE

Steel washer 6mm

jdive1004

0.61 €

Steel washer with 6mm pitch

En Stock

Available

STEEL HARDWARE

Teflon washer

jdve0027

1.21 €

Teflon washer especially indicated for aluminum backplates in order to prevent the contact of the steel screws with the backplate. Perfectly suitable also for use on steel backplates as a washer without more ... 1mm thick x 16mm in diameter. Suitable for screws up to 8mmø

En Stock

Available

STEEL HARDWARE

Tri Gilde Billy Ring Large

SFAC1042

12.00 €

Welded/fiexed D-Ring ring with a greater height than standard (44 mm in this case) for 50 mm cinch straps.

En Stock

Available

Accessories

Tri glide 50mm with attachment port

SFTGP

7.50 €

Inner diameter of the port: 16mm

En Stock

Available

Accessories

Tri glide butt wide double port 50mm

SFTGBD

15.00 €

Retainer with fixed dual port bent D-Ring

En Stock

Available

STEEL HARDWARE

Trim bar glider "T" type

80135

4.67 €

Multipurpose "T" type stainless steel retainer. Dimensions of the slots up to use with standard 5cm wide webbing.

En Stock

Available

STEEL HARDWARE

Trim bar glider with double Ring

80313

3.99 €

Stainless steel retainer for 5cm webbing with rings on both sides. Exterior measure: 57mm x 33mm Slots measure: 52mm x 6mm Interior measure of the rings: 25m x 19mm Thickness: 1.5mm

En Stock

Available

STEEL HARDWARE

Welded D-ring welded

ETA 650002

9.00 €

Fixed welded D-ring for 5cm webbing

En Stock

STEEL HARDWARE

Wing nut M10 SS A4

jdive1003

0.99 €

Wing nut Metric 10mm made of SS A4

En Stock

Available

STEEL HARDWARE

Wing nut M8 SS A4

DTD 3029

0.82 €

wing nut M8 A4

En Stock

Available

STEEL HARDWARE

Xdeep NX Series boltsnap

AC-016-0

12.00 €

A completely new shape of the head prodvides better support for the finger and more assured grip. A larger opening, a perfectly slim hook part of the head and a large trigger makes clipping amazingly easy, especially in thick gloves. Finally, the weight to strength ratio has been optimized to make it over 30% lighter than a regular bolt snap. made of...

En Stock

Available

STEEL HARDWARE

Xdeep NX Series boltsnap for regulator

AC-012-0

9.99 €

En Stock

Available

STEEL HARDWARE

Xdeep NX Series boltsnap for stage

AC-013-0

12.00 €

En Stock

Available

Spare parts

Xdeep Stainless Steel weight belt buckle

HA-013-0

9.99 €

En Stock

Available 24-48h

Accessories

Xdeep STEALTH 2.0 back D-ring set

HA-052-0

15.00 €

The Back D-rings for the Stealth 2.0 are the square D-rings that extend off the waist band, which are used for the lower tank conection point (unless using a butt plate). Additional Back D-rings can be useful for additional stage tanks or accessories, on the Stealth or any other technical diving harness. The Back D-Rings have four slots for threading onto...

Fuera de Stock

Ask us about availability

STEEL HARDWARE

Adjustable D-Ring with bungee

80208

7.26 €

Adjustable stainless steel ring with standard 5cm wide slot, already bungee mounted Ideal for quick position adjustment

Fuera de Stock

Ask us about availability

Apeks wings Spare parts

Apeks 3/4 wings screw Set

BT115119

59.00 €

Apeks screw set for mounting wing gears (accopling wing to backplate). Made of stainless steel, they have a 20mm long screw. The inner faces of the threads have a rubber gasket that prevents them from unscrewing by themselves. Widths can be set from 25mm to 16mm. The minimum width they reach is 11mm but from 16 onwards, the stud protrudes from the rear.

Fuera de Stock

Ask us about availability

STEEL HARDWARE

D-Ring 50mm x 47mm

80129

2.21 €

Flat Stainless Steel D-Ring with interior dimensions in its widest parts of: 51mm wide x 49mm long Thread diameter 5mm

Fuera de Stock

Ask us about availability

STEEL HARDWARE

D-Ring Bend

80130

2.43 €

Bend Steel D-Ring with interior dimensions in its widest parts of: 51mm wide x 47mm long Thread diameter 5mm

Fuera de Stock

Ask us about availability

STEEL HARDWARE

D-Ring perfil bajo

80136

2.82 €

Flat SS D-Ring with interior dimensions in its widest parts of: 51mm wide x 26mm long Thread diameter 5mm

Fuera de Stock

Halcyon Stainless Steel Halycon weight belt buckle

Ask us about availability

Spare parts

Halcyon Stainless Steel Halycon weight belt buckle

62.040.010

26.62 €

Fuera de Stock

Ask us about availability

STEEL HARDWARE

Ladder ring

80083

3.99 €

Fuera de Stock

-10%

Ask us about availability

STEEL HARDWARE

Mares Dead Bolt Snap Pro 80mm

415752 - 80MM

17.96 € 19.95 €

Its wide eye facilitates its operation and the specifically designed trigger prevents tangling and is very easy to use even with dry gloves. High quality 316 grade marine grade stainless steel

Fuera de Stock

-15%

Ask us about availability

STEEL HARDWARE

Mares Double Ender Pro 105mm

415751 - 105MM

16.96 € 19.95 €

Its wide eye facilitates its operation and the specifically designed trigger prevents tangling and is very easy to use even with dry gloves. The multi-function holes offer us additional functions High quality 316 grade marine grade stainless steel

Fuera de Stock

-10%

Ask us about availability

STEEL HARDWARE

Mares Double Ender Pro 120mm

415751 - 120MM

19.75 € 21.95 €

Fuera de Stock

Ask us about availability

Spare parts

Slide Tri Glide

SFSTG

5.00 €

Slide tri glide for 50mm webbing.It can be use for different applies, one of them and the most demanding is mounting it on the back of the back plate, making the cinch able to run over it and making the harness infinitely adjustable.

Fuera de Stock

Triglide with Sawtooth Bar and fixed D-Ring

Ask us about availability

Hardware

Triglide with Sawtooth Bar and fixed D-Ring

417552

26.95 €

50MM TOOTHED AND CURVED TRIGLIDERS MARES, ALUMINIUM

Fuera de Stock

Ask us about availability

Hardware

Triglide with Sawtooth Bar and fixed D-Ring

417553

26.95 €

MARES 50MM TOOTHED AND CURVED TRIGLIDERS, STAINLESS STEEL

Fuera de Stock

Out-of-Stock

STEEL HARDWARE

Backplate screw set M10

jdive1002

3.93 €

Set of steel screws for backplate in metric 10 composed of 2 hex head screws 24mm long and 2 wing nuts

View

Fuera de Stock

Out-of-Stock

STEEL HARDWARE

Belt stop serrated Stainless Steel 316L

80125

1.57 €

Serrated stainless-steel stopper for 50 mm (2") strap.

View

Fuera de Stock

Out-of-Stock

STEEL HARDWARE

Bolt Snap with shackle

DP-HL911

26.62 €

Stainless Steel marine gradeTotal length: 100mmEye size: 18mm x 11mmShackle size: 14mm x 15mm

View

Fuera de Stock

Boltsnap, coldwater boltsnap,stainless steel, 120mm

Out-of-Stock

STEEL HARDWARE

Boltsnap, coldwater boltsnap,stainless steel, 120mm

bs120

9.99 €

Boltsnaps, the fixing solution in technical diving. Whether to attach the primary regulator, the lamp, the backup lamp or the pressure gauge - always this carabiner is used for. The size is the way specified in the length and diameter of the eye. This boltsnap is perfect for cold water conditions. Stainless steell Length ca. 120 mm Diameter Eye ca. 33 mm

View

Fuera de Stock

Out-of-Stock

STEEL HARDWARE

D-ring 25 mm.

DTD 3015

1.45 €

Stainless-steel D-ring for strap. Thickness 2 mm, width 25 mm.

View

Fuera de Stock

Out-of-Stock

inicio

OMS Square ring Aluminum

A24518008

4.40 €

Rectangular aluminum ring used in OMS Smartstream harnesses, it´s also useful for many other tasks. Its dimensions: Inside: 55mm x 12mm Thread diameter: 5mm Weight: 7gr

View

Fuera de Stock

Screw set for buoy pocket, extra long (16mm)

Out-of-Stock

STEEL HARDWARE

Screw set for buoy pocket, extra long (16mm)

DTD 3021L

7.20 €

Set of 8 extra long screws to mount the buoy pocket or backpad on 6mm backplates or in cases where a longer stud is required (stud size 16mm). The female thread is high-strength plastic and also slows the thread, making it more difficult to accidentally unscrew. This set is useable for 6mm backplates.

View

Fuera de Stock

screw-set-for-weighting-system-longer-screws

Out-of-Stock

STEEL HARDWARE

Screw set for weighting system longer screws

DTD 3028

7.39 €

Screw set for weighting system with longer screws. Suitable for backplate 6 mm.

View

Fuera de Stock

Out-of-Stock

DECO ESSENTIALS

Stage D-Rings holder

XS-HL916

6.50 €

Width: 20 mm Inner flange pitch: 17 mm Slot width: 5.5 mm Length: 40 mm Material: Steel

View

Fuera de Stock

Out-of-Stock

STEEL HARDWARE

stainless-steel stopper

DTD 3016

1.38 €

View

Fuera de Stock

Out-of-Stock

STEEL HARDWARE

Steel washer 8mm

jdive1007

0.61 €

Made of stainless steel 30415,5mm in diameter. Suitable for screws up to 8mmø

View

Fuera de Stock

Out-of-Stock

STEEL HARDWARE

Steel washer 8mm

jdive1006

0.61 €

Made of stainless steel 30419mm in diameter. Suitable for screws up to 8mmø

View

Fuera de Stock

Out-of-Stock

STEEL HARDWARE

Steel washer 8mm

jdive0028

0.61 €

Made of stainless steel 3040,8mm thick x 22mm in diameter. Suitable for screws up to 8mmø

View

Fuera de Stock

-15%

Out-of-Stock

Hardware things...

Triglide, aluminium

reten.alu.bts

2.30 € 2.70 €

Aluminum Triglide, for 50mm webbing18mm x 63mm x 1.3m

View

Showing 1-122 of 122 item(s)