En Stock -15% Available Hardware things... IQ Lite screw (Nylon) 6 pieces A11918074 7.65 € 9.00 € Add to cart
En Stock New Available STEEL HARDWARE Adjustable D-Ring with bungee 80208 7.26 € Adjustable stainless steel ring with standard 5cm wide slot, already bungee mounted Ideal for quick position adjustment Add to cart
En Stock Available STEEL HARDWARE aluminium whistle red DTD 3311 2.10 € Aluminium whistle red Add to cart
Fuera de Stock -22% Ask us about availability Apeks wings Spare parts Apeks wings screw Set BT115119 46.02 € 59.00 € Apeks screw set for mounting wing gears (accopling wing to backplate). Made of stainless steel, they have a 20mm long screw. The inner faces of the threads have a rubber gasket that prevents them from unscrewing by themselves. Widths can be set from 25mm to 16mm. The minimum width they reach is 11mm but from 16 onwards, the stud protrudes from the rear. Add to cart
En Stock New Available STEEL HARDWARE Belt stop serrated Stainless Steel 316L 80125 1.57 € Serrated stainless-steel stopper for 50 mm (2") strap. Add to cart
En Stock New Available STEEL HARDWARE Bolt Snap Stainless Steel 316L 7.99 € 316L Steel bolt snaps. Its high quality not only in the exterior steel and finish but also in the spring used makes them a very smooth operation. 4 sizes available: 90mm: 21mm x 11mm eye and 20mm x 15mm ring 100mm: 21mm x 11mm eye and 23mm x 21mm ring 110mm: 21mm x 11mm eye and 37mm x 34mm ring Choose the desired size from the drop-down menu Add to cart
En Stock New Available STEEL HARDWARE Bolt Snap Technical, Stainless Steel 316L 11.89 € 316L Steel bolt snaps. Its high quality not only in the exterior steel and finish but also in the spring used makes them a very smooth operation. Its large anti-snag trigger allows us to use them with any type of gloves or without them, comfortably and precisely. The eye design makes them quick to clip. The three options have the same body size, differing... Add to cart
Fuera de Stock Out-of-Stock STEEL HARDWARE Bolt Snap with shackle DP-HL911 16.00 € Stainless Steel marine gradeTotal length: 100mmEye size: 18mm x 11mmShackle size: 14mm x 15mm View
En Stock Available STEEL HARDWARE Bolt snap, stainless steel 6.20 € Four sizes available: S: 64 mm length 16 mm ø approx. for the Eye and 11mm ø for the end ring M: 80 mm length 18 mm ø approx. for the Eye and 16mm ø for the end ring L: 92mm length 21 mm ø approx. for the Eye and 19mm ø for the end ring XL: 117 mm length 18 mm ø approx. for the Eye and 34mm ø for the end ring Add to cart
En Stock Available STEEL HARDWARE Boltsnap, coldwater boltsnap,stainless steel, 120mm bs120 9.99 € Boltsnaps, the fixing solution in technical diving. Whether to attach the primary regulator, the lamp, the backup lamp or the pressure gauge - always this carabiner is used for. The size is the way specified in the length and diameter of the eye. This boltsnap is perfect for cold water conditions. Stainless steell Length ca. 120 mm Diameter Eye ca. 33 mm Add to cart
En Stock -15% Available 24-48h Hardware things... Book screw tool A11918097 1.61 € 1.90 € Specific tool to facilitate the screwing-unscrewing operation of the Book screw set for backpad, backplate, argon systems, etc It is sold individually but two pieces are recommended to facilitate the work Link to the Screw set Add to cart
En Stock Available BUNGEE MOUNTS/COMPASS BUNGEE in 4, 5, 6 and 8mm 1.36 € Price per meter Add to cart
En Stock -15% Available inicio Cover for Book Screw nut flat A11818019 0.85 € 1.00 € Rubber cover for Book Screw nut flat 1/4" Link to the Book Screw nut NOTE: The price corresponds only to the rubber cover, the visible nut in the photo is for illustrative purposes Add to cart
En Stock Available STEEL HARDWARE D-ring 25 mm. 3015 1.45 € Stainless-steel D-ring for strap. Thickness 2 mm, width 25 mm. Add to cart
En Stock Available STEEL HARDWARE D-Ring 50mm Flat DTD 3011 2.75 € Made of marine grade steel, 316L Ring thread: 4.8mmø Interior width in the widest areas: 55mm x 42mm Add to cart
En Stock New Available STEEL HARDWARE D-Ring 50mm x 47mm 80129 2.21 € Flat Stainless Steel D-Ring with interior dimensions in its widest parts of: 51mm wide x 49mm long Thread diameter 5mm Add to cart
En Stock New Available STEEL HARDWARE D-Ring Bend 80130 2.43 € Bend Steel D-Ring with interior dimensions in its widest parts of: 51mm wide x 47mm long Thread diameter 5mm Add to cart
En Stock New Available STEEL HARDWARE D-Ring perfil bajo 80136 2.82 € Flat SS D-Ring with interior dimensions in its widest parts of: 51mm wide x 26mm long Thread diameter 5mm Add to cart
En Stock Available STEEL HARDWARE D-Rings Bent SS316 Mares XR Line 417526 3.94 € Mares D-Ring Bent Stainless Steel 316 Add to cart
Fuera de Stock Ask us about availability Hardware D-Rings FLAT SS316 Mares XR Line 417525 3.94 € Mares D-RIng Flat 50mm wide Add to cart
En Stock Available STEEL HARDWARE DTD stainless-steel belt buckle DTD 3004 9.87 € stainless-steel belt buckle High-quality stainless-steel buckle. Add to cart
En Stock Available STEEL HARDWARE DTD stainless-steel bolt-snap 6.80 € DTD Bolt-snap in two sizes: Stainless-steel bolt-snap small for backup torches and small things attaching to a loop in pocket, etc. Length is 75 mm, the eye is 9 mm wide. And Stainless-steel bolt-snap for pressure gauge, long hose, etc. The eye is 20 mm wide The other bolt-snap is 114mm long and 40mm wide for the eye. Add to cart
En Stock Available STEEL HARDWARE DTD stainless-steel double end snap long 9.33 € Stainless-steel double end snap Stainless-steel double end snap, all-round use for fastening various equipment, overall length 100 mm or 120mm Add to cart
En Stock Available STEEL HARDWARE Extra wide ladder ring DTD 3026 9.15 € Ring to mount on the belt as shown in the photo. Its measures are: Totals: 53 x 90mm Internal measurement of the useful part: 43 x 23mm NOTE: The price is for only one unit. The double photo is by way of illustration. Add to cart
En Stock Last items in stock STEEL HARDWARE Halcyon Adjustable Crotch Strap with Front & Rear D-Rings 10050003 48.40 € Replaces or Adds to any Halcyon Secure Harness System (or any other harness brand). Keeps the BC unit Secure on the Diver in any Position Add to cart
En Stock Available Spare parts Halcyon Stainless Steel Halycon weight belt buckle 62040010 26.62 € Add to cart
Fuera de Stock Out-of-Stock COMPLEMENTS Handwheel Tool XS-DSS-HW-VV-KY 11.90 € All hand wheels on diving cylinders are held on by a small nut that requires a slotted screwdriver. This hand wheel tool is universal and works on almost all brands of scuba valves and hand wheels. Made of stainless steel with a larger handle for those hard to loosen nuts. This hand wheel tool can even double as a keychain for diving enthusiasts! View
En Stock -19% Available Hardware Hebilla Aluminio de ajuste de arnés Mares 417556 48.56 € 59.96 € Safety aluminium buckle for adjusting the harness, allows us to adjust the harness and release the strap for easier entry and exit from the equipment. NOTE: THE PRICE IS FOR ONE BUCKLE. THE PHOTO SHOWS TWO UNITS WITH THE INTENTION SHOW IT IN OPEN AND CLOSED Add to cart
En Stock New Available STEEL HARDWARE Ladder ring 80083 3.99 € Ring to mount on the belt as shown in the photo. Its measures are: Totals: 38 x 99mm Internal measurement of the useful part: 33 x 28 mm. NOTE: The price is for a single unit. The double photo is by way of illustration. Add to cart
En Stock Available Accessories Ladder ring TEC-DR-8 8.99 € Ring to mount on the belt as shown in the photo. Its measures are: Totals: 38 x 99mm Internal measurement of the useful part: 33 x 28 mm. NOTE: The price is for a single unit. The double photo is by way of illustration. Add to cart
En Stock -25% Available STEEL HARDWARE Mares Bolt dead snap Ceramic Mosquetones giratorios Mares XR cerámicos 17.25 € 23.00 € Mares XR dead bolt snap in high quality 316L stainless steel with black ceramic coating Available in 2 sizes: Small (S): 75mm Large (L): 120mm Choose the required one according to S or L in the drop-down menu Add to cart
En Stock Available Hardware Mares D-RIng for adjustable harness 417522 17.94 € Sliding ring to mount on the lower part of the backplate, allowing the harness web to run freely, making this an adjustable continuous webbing harness Add to cart
En Stock -10% New Available STEEL HARDWARE Mares Dead Bolt Snap Pro 110mm 415752 - 80MM 17.96 € 19.95 € Its wide eye facilitates its operation and the specifically designed trigger prevents tangling and is very easy to use even with dry gloves. High quality 316 grade marine grade stainless steel Add to cart
En Stock -10% New Available STEEL HARDWARE Mares Dead Bolt Snap Pro 80mm 415752 - 80MM 17.96 € 19.95 € Its wide eye facilitates its operation and the specifically designed trigger prevents tangling and is very easy to use even with dry gloves. High quality 316 grade marine grade stainless steel Add to cart
En Stock -15% New Available STEEL HARDWARE Mares Double Ender Pro 105mm 415751 - 105MM 18.66 € 21.95 € Its wide eye facilitates its operation and the specifically designed trigger prevents tangling and is very easy to use even with dry gloves. The multi-function holes offer us additional functions High quality 316 grade marine grade stainless steel Add to cart
En Stock -10% New Available STEEL HARDWARE Mares Double Ender Pro 120mm 415751 - 120MM 19.76 € 21.95 € Its wide eye facilitates its operation and the specifically designed trigger prevents tangling and is very easy to use even with dry gloves. The multi-function holes offer us additional functions High quality 316 grade marine grade stainless steel Add to cart
En Stock Available Hardware Mares Triglide with Sawtooth Bar 417524 22.95 € Triglide with Sawtooth Bar to use on 50mm wide cinch Add to cart
En Stock Available STEEL HARDWARE Mares XR dead bolt snap Mosquetones giratorios Mares XR 13.00 € Mares XR dead bolt snap in high quality 316L stainless steel Available in 2 sizes: Small (S): 75mm Large (L): 120mm Choose the necessary one according to S or L in the drop-down menu Add to cart
En Stock -25% Available STEEL HARDWARE Mares XR double ender bolt snap Mosquetones dobles Mares XR cerámicos 13.50 € 18.00 € Mares XR dead bolt snap in high quality 316L stainless steel with black ceramic coating Available in 3 sizes: Small (S): 90mm Medium (M): 100mm Large (L): 120mm Choose the necessary one according to S, M or L in the drop-down menu Add to cart
En Stock -18% Available STEEL HARDWARE Mares XR double enders carabiners Mosquetones dobles Mares XR 17.22 € 21.01 € Mares XR double enders carabiners in high quality 316L stainless steel Available in 3 sizes: Small (S): 90mm Medium (M): 100mm Large (L): 120mm Choose the necessary one according to S, M or L in the drop-down menu Add to cart
Fuera de Stock -18% Out-of-Stock Hardware Metal buckle SS316 - XR Line 417555 32.76 € 39.95 € Safety stainless steel buckle for adjusting the harness, allows us to adjust the harness and release the strap for easier entry and exit from the equipment. NOTE: THE PRICE IS FOR ONE BUCKLE. THE PHOTO SHOWS TWO UNITS WITH THE INTENTION SHOW IT IN OPEN AND CLOSED View
En Stock Available Hardware things... OMS D-Ring 1" (~25 mm) stainless Steel , straight A11910208 2.40 € Add to cart
En Stock Available Hardware things... OMS 2 in (5 cm) Stainless Steel D-Ring, ~ 45° bend A24510206 4.40 € Add to cart
En Stock Available Hardware things... OMS 2 in (~5 cm) Stainless Steel D-Ring A11910209 4.40 € Add to cart
En Stock -20% Available STEEL HARDWARE OMS BigGrip Double-Enders 8.88 € 11.10 € Product Description Hardware in any size or configuration has always been a hunt for the best grip. Divers wearing thick neoprene or dry gloves can have difficulties manipulating gear clips. OMS BigGrip™ clips have an extended section on the gate that allows for easier use of the clip. Available on all size and style clips available from OMS. Standard on... Add to cart
En Stock Available Hardware things... OMS Book screw 1/4" 4.40 € Screw (one unit) for mounting the wing with the backplate, Argon system, weight pockets, or,... etc... The screw is provided with an O-ring at the base in order, on the one hand, to prevent it from slipping and loosening and, on the other, to avoid direct pressure of the metal against the fixed part. 1/4" screw thread, available in 3 sizes: 12mm 18mm... Add to cart
En Stock -15% Available inicio OMS Book Screw nut flat A11818017 5.12 € 6.03 € Female Screw (one unit) for mounting the wing with the backplate, Argon system, weight pockets, or,... etc... The screw is provided with an O-ring at the base in order, on the one hand, to prevent it from slipping and loosening and, on the other, to avoid direct pressure of the metal against the fixed part. 1/4" screw thread The male threads are sold... Add to cart
En Stock -15% Available inicio OMS Book Screw nut flat 1/4" A11818018 3.81 € 4.48 € Female Flat Screw (one unit) for mounting the wing with the backplate, Argon system, weight pockets, or,... etc... SCREWS Rubber cover Add to cart
En Stock Available inicio OMS Square ring Aluminum A24518008 4.50 € Rectangular aluminum ring used in OMS Smartstream harnesses, it´s also useful for many other tasks. Its dimensions: Inside: 55mm x 12mm Thread diameter: 5mm Weight: 7gr Add to cart
En Stock -15% Available Hardware things... OMS weight belt buckle 16.49 € 19.40 € Available in Stainless Steel or Aluminium Add to cart
En Stock -20% Available STEEL HARDWARE OMS® BigGrip Bolt-Snaps 7.36 € 9.20 € Product Description Hardware in any size or configuration has always been a hunt for the best grip. Divers wearing thick neoprene or dry gloves can have difficulties manipulating gear clips. OMS BigGrip™ clips have an extended section on the gate that allows for easier use of the clip. Available on all size and style clips available from OMS. Standard on... Add to cart
En Stock Available STEEL HARDWARE Plastic slider, 50mm HA60245020 1.36 € Plastic slider with slots for 50mm webbing Add to cart
En Stock Available COMPLEMENTS Plastic Thumbwheel M8 x 1,25 (Pair) 18.00 € Plastic Thumbwheels with stainless steel thread inserted. Designed to replace the butterfly nuts on DIR Style SteelBands, these thumbwheel allow an easier manipulation,also with Dive gloves. Available in two thread types: M8 x 1.25 (metric thread) 5/16 "x 18 (Imperial thread) Add to cart
En Stock Last items in stock Accessories Retainer with fixed D-Ring and port (pair) SFSTGA 19.36 € Inner diameter of the port: 16mm Add to cart
En Stock Available Spare parts Rubber ring for harness and D-Ring A11918092 4.01 € Rubber Ring with 8,0 mmø section, 50mm outer diameter and 85mm inner diameter.This ring is used in OMS wing equipment to keep the D-Rings of the pockets in a 90º position. It is also used in harnesses to stop different elements that we have mounted. Add to cart
En Stock Available STEEL HARDWARE Screw set for backplate DTD 3022 3.92 € Screw set for mounting wing to backplate. Suitable for backplate 3 mm. Add to cart
En Stock Available STEEL HARDWARE Screw set for buoy pocket DTD 3021 7.20 € Screw set for buoy pocket with. Suitable for backplate 3 mm. Add to cart
En Stock Last items in stock STEEL HARDWARE Screw set for buoy pocket, extra long (16mm) DTD 3021L 7.20 € Set of 8 extra long screws to mount the buoy pocket or backpad on 6mm backplates or in cases where a longer stud is required (stud size 16mm). The female thread is high-strength plastic and also slows the thread, making it more difficult to accidentally unscrew. This set is useable for 6mm backplates. Add to cart
En Stock Available STEEL HARDWARE Screw set for STA DTD 3025 4.15 € Screw set for mounting STA to backplate. Screws are longer then screws for compensator, 25 mm instead 20 mm. Also suitable for wing with 6 mm backplate. Add to cart
En Stock Available STEEL HARDWARE Screw set for weighting system DTD 3023 7.39 € Screw set for weighting system. Suitable for backplate 3 mm. Add to cart
En Stock Available STEEL HARDWARE Screw set for weighting system longer screws DTD 3028 7.39 € Screw set for weighting system with longer screws. Suitable for backplate 6 mm. Add to cart
En Stock Available STEEL HARDWARE Scuba Force Cobra GT Buckle female FG50MWF 15.00 € The GT Cobra high strength polymer buckle system. designed to be more robust than any other type of plastic hardware on the market, with a targeted tensile load of 500lbf/2,2kN, the GT cobra buckle is a 100% Polymer system with no metal components. Add to cart
En Stock Available STEEL HARDWARE Scuba Force Cobra GT Buckle male, adjustable type FG50MMV 12.50 € The GT Cobra high strength polymer buckle system. designed to be more robust than any other type of plastic hardware on the market, with a targeted tensile load of 500lbf/2,2kN, the GT cobra buckle is a 100% Polymer system with no metal components. THIS PART NEEDS OF THE FEMALE PART (LINK) Add to cart
En Stock Available STEEL HARDWARE Scuba Force Cobra GT Buckle male, fixed type FG50MMF 12.50 € The GT Cobra high strength polymer buckle system. designed to be more robust than any other type of plastic hardware on the market, with a targeted tensile load of 500lbf/2,2kN, the GT cobra buckle is a 100% Polymer system with no metal components. This part needs of the female part (link) Add to cart
En Stock Available STEEL HARDWARE Scuba Force double snap 7.50 € Double stainless- steel snap Stainless-steel double end snap, all-round use for fastening various equipment. Available in two sizes: M: 100mm L: 117mm Add to cart
En Stock Available Spare parts Slide Tri Glide SFSTG 7.90 € Slide tri glide for 50mm webbing.It can be use for different applies, one of them and the most demanding is mounting it on the back of the back plate, making the cinch able to run over it and making the harness infinitely adjustable. Add to cart
En Stock Available Accessories Sliding D-Ring 50mm DR50SLIDE 8.17 € This D-Ring allows us to use it as a retainer for a classic D-Ring allowing us to move its position up and down, see attached photo as an example. Add to cart
En Stock New Available STEEL HARDWARE Stainless Steel Eyelet 10mmø 8473 1.36 € 10mmø Stainless steel eyelet with for riveting. Add to cart
En Stock Available STEEL HARDWARE Stainless steel hose clamp 3.87 € Stainless steel clamps for fixing the breathing hoses, or anything you need... Wide: 12mmTwo sizes available:30 to 45mm (S)32 to 50mm (M) ATTENTION: the price is for one unit. Add to cart
En Stock Available STEEL HARDWARE Stainless Steel Quick Link 6.00 € Three sizes availables: Inner space 46mm x 15mm; 6mmØ thread; Maximum opening of the closing 8.5mmInner space 39mm x 13mm; 5mmØ thread; Maximum opening of closing 7.5mmInner space 33mm x 12mm; 4mmØ thread; Maximum opening of the closing 6mm Please, choose your size from the dropdown menu Add to cart
En Stock Available STEEL HARDWARE Stainless Steel quick link DTD 3019 2.98 € Quick Link Quick-Link stainless-steel, dimensions 36 x 17 mm, diameter 3,5 mm, opening max 5 mm Add to cart
En Stock Last items in stock COMPLEMENTS Stainless steel tank clamp W5 7.01 € 6 sizes available: 70mm a 90mm (XS) 90mm a 110mm (S) 100mm a 120mm (M) 120mm a 140mm (L) 140 a 16mm (XL) 170 a 190mm (XXL) Add to cart
En Stock Available STEEL HARDWARE Stainless-steel D-Ring Bend DTD 3012 2.86 € Made of marine grade steel, 316L Ring thread: 4.8mmø Interior width in the widest areas: 55mm x 42mm Add to cart
Fuera de Stock Out-of-Stock STEEL HARDWARE Steel washer jdive0028 0.61 € Made of stainless steel 3041.8mm thick x 24mm in diameter. Suitable for screws up to 8mmø View
En Stock Available STEEL HARDWARE Teflon washer jdve0027 1.21 € Teflon washer especially indicated for aluminum backplates in order to prevent the contact of the steel screws with the backplate. Perfectly suitable also for use on steel backplates as a washer without more ... 1mm thick x 16mm in diameter. Suitable for screws up to 8mmø Add to cart
En Stock Available STEEL HARDWARE Tri Gilde Billy Ring Large SFAC1042 11.98 € Welded/fiexed D-Ring ring with a greater height than standard (44 mm in this case) for 50 mm cinch straps. Add to cart
En Stock Last items in stock Accessories Tri glide 50mm with attachment port SFTGP 8.47 € Inner diameter of the port: 16mm Add to cart
En Stock Available Accessories Tri glide butt wide double port 50mm SFTGBD 17.86 € Retainer with fixed dual port bent D-Ring Add to cart
Fuera de Stock Ask us about availability Hardware Triglide with Sawtooth Bar and fixed D-Ring 417552 26.95 € 50MM TOOTHED AND CURVED TRIGLIDERS MARES, ALUMINIUM Add to cart
Fuera de Stock Ask us about availability Hardware Triglide with Sawtooth Bar and fixed D-Ring 417553 26.95 € MARES 50MM TOOTHED AND CURVED TRIGLIDERS, STAINLESS STEEL Add to cart
Fuera de Stock -15% Out-of-Stock Hardware things... Triglide, aluminium reten.alu.bts 2.30 € 2.70 € Aluminum Triglide, for 50mm webbing18mm x 63mm x 1.3m View
En Stock New Available STEEL HARDWARE Trim bar glider "T" type 80135 4.67 € Multipurpose "T" type stainless steel retainer. Dimensions of the slots up to use with standard 5cm wide webbing. Add to cart
En Stock New Available STEEL HARDWARE Trim bar glider with double Ring 80313 3.99 € Stainless steel retainer for 5cm webbing with rings on both sides. Exterior measure: 57mm x 33mm Slots measure: 52mm x 6mm Interior measure of the rings: 25m x 19mm Thickness: 1.5mm Add to cart
En Stock Available STEEL HARDWARE Welded D-ring welded ETA 650002 9.00 € Fixed welded D-ring for 5cm webbing Add to cart
En Stock New Available STEEL HARDWARE Xdeep NX Series boltsnap AC-016-0 12.00 € A completely new shape of the head prodvides better support for the finger and more assured grip. A larger opening, a perfectly slim hook part of the head and a large trigger makes clipping amazingly easy, especially in thick gloves. Finally, the weight to strength ratio has been optimized to make it over 30% lighter than a regular bolt snap. made of... Add to cart
En Stock New Available STEEL HARDWARE Xdeep NX Series boltsnap for regulator AC-012-0 10.00 € A completely new shape of the head prodvides better support for the finger and more assured grip. A larger opening, a perfectly slim hook part of the head and a large trigger makes clipping amazingly easy, especially in thick gloves. Finally, the weight to strength ratio has been optimized to make it over 30% lighter than a regular bolt snap. made of... Add to cart
En Stock New Available STEEL HARDWARE Xdeep NX Series boltsnap for stage AC-013-0 12.00 € A completely new shape of the head prodvides better support for the finger and more assured grip. A larger opening, a perfectly slim hook part of the head and a large trigger makes clipping amazingly easy, especially in thick gloves. Finally, the weight to strength ratio has been optimized to make it over 30% lighter than a regular bolt snap. made of... Add to cart
En Stock New Available Spare parts Xdeep Stainless Steel weight belt buckle HA-013-0 8.28 € Add to cart
En Stock Available 24-48h Accessories Xdeep STEALTH 2.0 back D-ring set HA-052-0 14.76 € The Back D-rings for the Stealth 2.0 are the square D-rings that extend off the waist band, which are used for the lower tank conection point (unless using a butt plate). Additional Back D-rings can be useful for additional stage tanks or accessories, on the Stealth or any other technical diving harness. The Back D-Rings have four slots for threading onto... Add to cart