SPARE PARTS

rEvo

Meg

JJ-CCR

SF2 eCCR

DiveSoft

Horizon

En Stock

Available

Meg

9v battery adapter

BB-Adapter 9v

7.00 €

This 9V standard batteries adapter is perfect to use when you are out of genuine Meg batteries. An essential tool along with standard 9v batteries in our toolkit so you do not miss any immersion due to lack of batteries.

Fuera de Stock

Out-of-Stock

Meg

9v battery duplicator for Meg®

ISC-9V-DUP

12.00 €

With this duplicator you will be able using two 9v batteries together getting the double of capacity/twich time run time.

View

En Stock

Available

Meg

ADV-Schrader Valve for ISC rebreathers

ADV-Schrader Valve

3.14 €

ADV-Schrader Valve spare part for ISC Rebreathers (Copis, Meg and Pathfinder)

En Stock

inicio

Breathing hoses ballast (pair) (pre owned)

Jdive00BH

49.58 €

Weight rings for JJ-CCR breathing hoses. The rings are made of stainless steel and have exceptional finishes, which also fit perfectly into the JJ-CCR breathimngs hoses Specs:: Weigh 300gr/unit Inner: 36mm Outer: 56mm Width: 25mm NOTE: this product is used. It presents slight signs of wear that in some areas reveal the interior brass, nothing that could...

En Stock

Available

inicio

Cell Retainer nut (pair)

48620207

8.26 €

Fuera de Stock

Out-of-Stock

Meg

Complete clip for ISC® Andy strap

HAR-Complete Buckle

4.40 €

The two pieces, female and male, that compose the clips for the counter lungs and crotch strap of the ISC® rebreathers

View

Fuera de Stock

Ask us about availability

rEvo

copy of rEvo DiveCan Battery Box (NO rMS)

R411B / 63

420.00 €

Battery box kit for the rEvo model DiveCan NON rMS with classic solenoid connections NOTE: The product image shows the waterproof Solenoid connections, not match the product itself!!!

En Stock

Available

rEvo

Cover Retaining Nut

48600015

23.76 €

Unfortunately, many users end up losing this piece. Do not stop diving because you do not have this spare part.

Fuera de Stock

Ask us about availability

BOVs

Divesoft BOV for...

900.52 € 968.30 €

Description Divesoft BOV for use with any rebreather listed at the dropdown menuSupplied together with two clamping rings. CE approved to EN250:2014

Fuera de Stock

Out-of-Stock

Meg

DSV mushroom valve

DSV Flapper valve

5.06 €

View

En Stock

Available

Meg

Dust Cap Set 9/16" (male & female)

DS-2

41.73 €

Female and male metal Dust Cap for the 9/16 "regulator hose connections Ideal for protecting the hose terminal, rebreather head inlet, BOV, etc ...

Fuera de Stock

Out-of-Stock

Meg

Dust Caps 9/16"

NAN0003

23.97 €

These dust caps are made to fit any standard 2nd stage hose and reg fitting.One use is to cap the oxygen solenoid and hose of your rebreather or cap the ends of the ADV hoseIt fits the kiss BOV, or can be used simply to protect and keep hoses clean.ALSO FITS ANY STANDARD 9/16 REGULATOR FITTINGThey come as a set 1 male and 1 female (one for the hose and...

View

En Stock

Available

BATTERIES

Energizer Litium 9v Battery

BAT-6F22/EG

21.00 €

Non-rechargeable 9V lithium battery. Ideal for replacing traditional batteries found in rEvo, JJ, and Megalodon Classic (an adapter is required for this), greatly extending battery life.

En Stock

Available

rEvo

Extension 25 mm incl male M8 for Stand

48620608

6.20 €

Fuera de Stock

Ask us about availability

rEvo

Extension 50 mm for Stand

48600793

4.88 €

En Stock

Available

Meg

Female clips for ISC®

HAR-Buckle female 1

2.20 €

The female part clip for the webbing of the counterlungs of the ISC® rebreathers NOTE: the photo shows the two sides of the piece. The price is for 1 Piece

Fuera de Stock

On demand

Wings

Halcyon Evolve JJ rebreather wing

519.00 €

The Evolve JJ Wing is precision-engineered for JJ-CCR rebreather divers seeking the performance and reliability of a true twin-cylinder wing. With 19 kg/42 lbs of lift and a streamlined design, it's built for demanding exploration dives. The Evolve JJ Rebreather Wing features a proven, circular bladder system that offers excellent stability and trim....

En Stock

Available

Meg

Head to coupling breathing hose O-Ring

Head to coupling O-Ring

3.30 €

The O-Ring that goes between the head and the base where the breathing hoses are screwed. See the piece in the photo.Note: base-piece not included, only shown by way of clarification.

Fuera de Stock

Ask us about delivery time

rEvo

Horizon & rEvo BOV Lever

48660017

12.00 €

En Stock

Available

rEvo

Horizon & rEvo scrubber spring

48600108

7.43 €

En Stock

Available

rEvo

Horizon & rEvo Top Marker

48600097

9.80 €

En Stock

Available

Horizon

Horizon battery box tool

48670033

20.66 €

The main battery compartment of the SCR Mares Horizon is sealed by man O-Ring that works conically. This requires firmly tightening the cap. This tool greatly facilitates both the closing and the opening of the compartment lid.

En Stock

Available

Horizon

Horizon battery compartment O-Ring

48630142

4.05 €

En Stock

Available

Horizon

Horizon BOV O-Rings

48660039

8.18 €

En Stock

Available

Horizon

Horizon filter cartridge

48660054

10.32 €

Filter cartridge spare part See attached file for instructions.

En Stock

Available

Horizon

Horizon gasket scrubber canister

48630144

5.37 €

En Stock

Available

Horizon

Horizon O-Ring Set

48630188

32.23 €

Mares Horizon complete O-Ring Set.

En Stock

Available

REBREATHER

Horizon Scrubber complete

48630135

57.02 €

En Stock

Available

Horizon

Horizon Sorb filters Set

48630187

43.50 €

8 pieces of sorb filters for the scrubber Can

Fuera de Stock

Ask us about delivery time

Horizon

Horizon weight compartment cover bottom

48630019

12.40 €

Fuera de Stock

Ask us about delivery time

Horizon

Horizon weight compartment cover top

48630020

12.40 €

Fuera de Stock

Ask about availability

Meg

ISC heads calibration kit

Calibration Kit J.Dive

74.37 €

It is a kit assembled by us and it consists of a flow restrictor connected to a ISC® genuine head plug by a low hose. It is the easiest and most accurate way to calibrate our Meg, Copis and Pathfinder heads. Only by connecting the flow restrictor to our Oxygen tank with the DIN standard connection and adjusting the Oxygen flow to the right one...

Fuera de Stock

Out-of-Stock

TANKS & MORE...

ISC Oxygen decal

ISC DEC Oxygen decal

4.12 €

MEG® Oxygen Sticker Dimensions: 20cm x 5cm

View

Fuera de Stock

Out-of-Stock

Meg

ISC® Breathing hose (from the head to the T piece)

BH-Breathing hose 10.5"

45.45 €

Megalodon rebreather upper breathing hose

View

En Stock

Meg

ISC® ADV Pin

ISC-ADV-PIN

59.50 €

Fuera de Stock

Out-of-Stock

Meg

ISC® APECS 4 Lens

PHA4C-Lens MP

39.00 €

Lens for APECS 4 handset

View

Fuera de Stock

Out-of-Stock

Meg

ISC® Breathing hose (from the DSV to the Ts)

BH-Breathing hose 13"

34.71 €

Megalodon rebreather breathing hose, the witch one attached to the DSV The ones we supply are the new ones of silicone, softer and more comfortable than the old ones

View

Fuera de Stock

Product available with different options

Meg

ISC® Breathing hose clamp

4.95 €

Stainless steel clamps for the breathing hoses, available in three sizes: Option 1: 21-38mm, breathing hose connection to the head Option 2: 30-44mm, breathing hose connection to the Ts Option 3: 37-51mm, breathing hose connection to the DSV

View

Fuera de Stock

Out-of-Stock

Meg

ISC® Breathing hose kit

BH-Breathing hose kit

94.14 €

Breathing hose kit One breathing hose 10,5" (Ts to head) and one of 13" (Ts to DSV)

View

Fuera de Stock

Out-of-Stock

Meg

ISC® Complete Shadow mount kit

SM-Full set-ASSY

329.75 €

The Shadow mount is an extremely low profile cylinder mounting and accessories fixture that allows cylinders to “hug” the primary breathing system. It also allows for cylinders or accessories to be quickly and repeatability remounted in its desired configuration. Shadow mounts may be welded to the Megalodon CCR gas plenum canister or fixed by compression...

View

Fuera de Stock

Out-of-Stock

Meg

ISC® Counterlung Shoulder Strap

HAR-Shoulder strap

10.00 €

kit of straps and clips for attaching the counter lungs to the backplate

View

Fuera de Stock

Out-of-Stock

Meg

ISC® Crotch strap with male clips

HAR-Crotch strap

15.67 €

Specific crotch strap with permanently males clips attached.

View

En Stock

Available

Meg

ISC® DSV Lever

DSV-Valve lever MP

17.35 €

Fuera de Stock

Ask us about availability

Meg

ISC® DSV lever screw

FST-Screw w/o-ring

8.26 €

The O-ring is included with the screw.

Fuera de Stock

Out-of-Stock

Meg

ISC® Handset button spring

FST-Spring handset

3.08 €

ISC® Handset button spring used in APECS 2,5 and 2,7 versions (classics Megalodon version)

View

Fuera de Stock

Out-of-Stock

Meg

ISC® handset push button

ISC-PUSH-LEGACY

13.45 €

Push button for the ISC® Copis and Megalodon rebreathers Handset NOTE: The price is only for one button. Two units are shown in the photo to be able see both sides of the piece.

View

Fuera de Stock

Out-of-Stock

Meg

ISC® Hose clamp cover

4.05 €

Hose clamp cover There are three differents types, the short which fit in the Ts zone and in the HEad zone, the large for the exale zone of the DSV and the doubble for the HUD zone. Choose in the menu which option is needed

View

En Stock

Meg

ISC® Hose coupling nut

37.19 €

These are the threads nuts to attach the tracheas to the head. There are two options to choose from in the drop-down menu: Inhalation: this is the central part of the clean gas outlet with right-hand threads Exhaust: this is the piece that is next to it and is the entry of the gas still to be filtered and with left-hand threads

Fuera de Stock

Ask us about availability

Meg

ISC® Hose coupling tube

HS-hose col tube

8.18 €

The tube where the tracheas are mounted and the connection thread nut to the base.It is supplied together with the washer for the threads.

En Stock

Available

Meg

ISC® inhale/exhaust hose coupling base

56.60 €

These are the inhale and exhaust hose coupling bases whitch are screwed to the head. There are two options to choose from in the drop-down menu: Inhalation: this is the central part of the clean gas outlet with right-hand threads Exhaust: this is the piece that is next to it and is the entry of the gas still to be filtered and with left-hand threads

En Stock

Available

Meg

ISC® Lens for classic APECS handset

SHA-Lens-MP (legacy part)

25.20 €

Screen Len for the classic APECS Handsets of Megalodon and Copis. Despite having two screens options, one for the primary and one for the secondary handset. Those of the primary have been totally exhausted and there will be no more available. Only the secondary ones can be supplied, however, there is not problem so, it can be used to both handsets,...

Fuera de Stock

Ask us about availability

Meg

ISC® Meg HUD Holder

HUD-Mount-MP

26.18 €

Meg HUD bracket for Megalodon, Copis and Pathfinder DSV

En Stock

Available

Meg

ISC® O-ring silicone used in ADV

OR-218 ADV

3.05 €

Silicone O-Ring used at the ADV.

Fuera de Stock

Out-of-Stock

Meg

ISC® Sensor carriage top lock

top-sen-lock

116.00 €

Top of ICS Rebreather Sensors carriage of the models Megalodon classic and Copis. The piece is the one that, together with the metal part, closes the sensors carriage

View

Fuera de Stock

Out-of-Stock

Meg

ISC® Shadow mount kit, only tanks side

SM-Shadow Gear Male kit

127.27 €

View

Fuera de Stock

Out-of-Stock

Meg

ISC® Shadow mount male

SM-Shadow Gear Male

65.00 €

Shadow mount male side

View

En Stock

Available

Meg

ISC® Shadow mount pin

SM-Pin

33.05 €

This Pin only works with genuine ISC® Shadow mount systems.

En Stock

ISC® Shadown mount female part (newer version)

Available

Meg

ISC® Shadown mount female part (newer version)

SM-Shadow Mount female

66.10 €

This is the female part of the ISC® Shadow mount system. This new version is wider than the previous one. Its measures are: 97mm hight x 32mm wide.

Fuera de Stock

Ask us about availability

Meg

ISC® single tank adapter for Meg.

GP-STA Meg

48.00 €

The Single tank adapter is a stainless steel single cylinder adapter that adapts a back plate to a single cylinder or in this case, to the Meg and Copis canister. The STA is used as a stand-alone fixture that mounts to the cylinder with nylon cam straps. (Not provided).

En Stock

Available

Meg

ISC® single tank adapter for Pathfinder

STA for PH

48.00 €

COMPLETE DESCRIPTION: The Single tank adapter is a stainless steel single cylinder adapter that adapts a back plate to a single cylinder or in this case, to the Pathfinder canister. The STA is used as a stand-alone fixture that mounts to the cylinder with nylon cam straps. (Not provided). NOTE: the canister picture is showed only as a example and match...

Fuera de Stock

Ask us about availability

Meg

ISC® Solenoid base

ML-Solenoid base-MP

36.36 €

Piece where the Meg solenoid is placed and fixed.

Fuera de Stock

Out-of-Stock

Meg

ISC® STA nut and bolt

ISC-SCREW-SET

3.72 €

Screw and nut for ISC® rebreathres STA (Copis, Megalodon and Pathfinder)

View

Fuera de Stock

Out-of-Stock

Meg

ISC®, internal retainer for DSV

FST-Snap RIng

3.80 €

Stainless Steel retainers used on the sides of the DSV of the Copis, Megalodon and Pathfinder rebreathers.

View

Fuera de Stock

Out-of-Stock

Meg

ISC®, Latch external

GP-Latch external

36.36 €

Latch External

View

Fuera de Stock

Out-of-Stock

Meg

ISC®, Latch external

GP-Latch internal

33.05 €

Latch Internal of the Meg Head

View

En Stock

Available

JJ-CCR

J-CCR Over pressure valve for 1st stage (17bar)

2010200038

29.00 €

Overpressure valve preset at 17Bar, indicated for the 1st stage of Diluent Adjustable from 10 to 20 bar

Fuera de Stock

Out-of-Stock

rEvo

Jaksa Solenoid inner spare part

298183

70.22 €

Jaksa solenoids are used in many rebreathers, it is the most common. When it fails, whether it is blocked and does not open or have leaks, it is not necessary to change the electromagnet. By changing only the internal part, the problem will be solved. Some of the rebreathers that use this model are: rEvo in some of its units Meg in some of her units SF2...

View

Fuera de Stock

Ask us about availability

DECO ESSENTIALS

JJ CCR Bailout Clamps (pair)

62100101

19.00 €

Stainless steel cylinder clamps with webbing to prevent scratches and abrasions. Used to secure the diluent cylinders, typically 7 liter or similar, in a GUE configured JJ CCR. Four would normally be required per unit.

En Stock

Available

JJ-CCR

JJ-CCR 3-Way Manifold

4100-30

53.72 €

3-way manifold with 9/16" male connection (to connect a standard regulator hose) and three 3/8" female connections (for standard regulator hose connection)

Fuera de Stock

Ask us about availability

JJ-CCR

JJ-CCR ADV complete

2016000000

220.00 €

Complete Inhale T with integrated ADV, etc...

En Stock

Available

JJ-CCR

JJ-CCR ADV Cover

3016080013

12.00 €

En Stock

Available

JJ-CCR

JJ-CCR ADV diaphragm

2050-10

32.73 €

ADV diaphragm spare part (JJ-CCR Rebreather)

En Stock

Available

JJ-CCR

JJ-CCR ADV Lever

2300-42

4.50 €

En Stock

Available

JJ-CCR

JJ-CCR ADV PIN

2300-44

2.47 €

En Stock

Available

JJ-CCR

JJ-CCR ADV Push Pin

2300-48

12.00 €

En Stock

Available

JJ-CCR

JJ-CCR ADV spring

2300-45

9.20 €

Fuera de Stock

Ask us about availability

JJ-CCR

JJ-CCR ASM Handle For Canister

2006100010

120.00 €

Fuera de Stock

Ask us about availability

JJ-CCR

JJ-CCR ASM Stand

2006100008

187.00 €

Fuera de Stock

On Demand

JJ-CCR

JJ-CCR Axial Scrubber

3060-00

276.00 €

Axial scrubber for JJ-CCR rebreather Capacity 2,3kg Autonomy 168´

En Stock

Available 24-48h

JJ-CCR

JJ-CCR backlit bolt spacer + bolt set

4100-42

21.00 €

En Stock

JJ-CCR

JJ-CCR breathing hose protectors

2300-10

29.99 €

JJ-CCR breathing hose protectors (pair)

Fuera de Stock

Ask us about availability

JJ-CCR

JJ-CCR canister bottom plate

3006080002

164.46 €

O-Rings NOT included

Fuera de Stock

Ask us about availability

JJ-CCR

JJ-CCR Complete exhale T

201600000010001

89.00 €

Complete Inhale T with integrated ADV, etc...

En Stock

Available

JJ-CCR

JJ-CCR Counter Lung inner bag

37.50 €

JJ-CCR rebreather counter lung inner bladders Choose the required one, inhalation or exhalation, from the drop-down menu

Fuera de Stock

Ask us about availability

JJ-CCR

JJ-CCR Counter lungs Complete Set

2007220040

695.00 €

Set with all the parts included, inner bladders, outer bag, OPV, Ts...

En Stock

JJ-CCR

JJ-CCR Divecan HUD Protector

DCHP

67.00 €

Divecan HUD Protector - Fits multiple Units inc. JJ-CCR, Hollis Prism, Optima

En Stock

Available

JJ-CCR

JJ-CCR DSV lever

3100-10

12.00 €

En Stock

Available

JJ-CCR

JJ-CCR DSV O-ring kit

2000-20

22.00 €

En Stock

Available

JJ-CCR

JJ-CCR Flapper valves for DSV or BOV

3018280004

30.00 €

Both mushrooms valves are included

En Stock

ADAPTERS

JJ-CCR Flow Stop

3000-10

64.00 €

En Stock

Available

JJ-CCR

JJ-CCR Heavy duty cam band

3400-00

26.25 €

En Stock

Available

JJ-CCR

JJ-CCR HUD

2200-10

247.11 €

HUD for rebreather JJ-CCR model DiveCan New HUD model for the JJ-CCR JJ's HUD now comes mounted on a holder to avoid pressure on it every time we mount and dismount it from the HUD DSV holder. In this way, what we will mount, consequently what we will put pressure on, will be on the support on which it is already mounted. In this way the life of the...

En Stock

Available

JJ-CCR

JJ-CCR HUD Holder

3002080000

10.00 €

HUD Holder to avoid having to mount and remove the HUD from the DSV's fixed holder. This new holder, included with all new HUDs, anchors itself to the DSV's fixed holder. This way, we avoid clipping and unclipping the HUD itself, thus extending its useful life due to the delicate nature of the transparent part. The part that clips and unclips is the new...

Fuera de Stock

Ask us about availability

JJ-CCR

JJ-CCR Lock Block for Stand (pair)

200608000710001

24.79 €

En Stock

Available

JJ-CCR

JJ-CCR Lockring for breathing hose

2300-05

2.50 €

En Stock

Available

JJ-CCR

JJ-CCR Lockwasher for breathing hose

3018080033

4.00 €

En Stock

Available

JJ-CCR

JJ-CCR Loop hose

2300-00

30.17 €

JJ-CCR Loop hose 1m long

Fuera de Stock

Ask us about availability

JJ-CCR

JJ-CCR Loop Weight

3100-04

31.50 €

En Stock

Available

MAVs, Flowstops, fittings, blocks...

JJ-CCR MAV

2026000000

185.00 €

The JJ-CCR Manual Addiction Valve has a 360º rotatory attached system which allow you easily to remove the on-board gas inlet and attached the off-board one in case of to be needed.

En Stock

Available

JJ-CCR

JJ-CCR MAV O-ring kit

2000-15

12.00 €

Complete kit for the JJ-CCR MAV maintenance.

En Stock

Available

JJ-CCR

JJ-CCR MAV spring

2026100009

9.00 €

En Stock

Available

JJ-CCR

JJ-CCR Membrane for dump valve

4100-01

1.00 €

En Stock

Available

JJ-CCR

JJ-CCR Mouthpiece for BOV or DSV

2050-20

15.70 €

En Stock

JJ-CCR

JJ-CCR Nut ADV Side

3100-06

30.00 €

En Stock

JJ-CCR

JJ-CCR Nut Tee Side

3100-02

30.00 €

En Stock

Available

JJ-CCR

JJ-CCR Over pressure valve for 1st stage (10bar)

2010200003

29.00 €

Overpressure valve preset at 10Bar, indicated for the 1st stage of Oxygen Adjustable from 0 to 10 bar

Fuera de Stock

On Demand

JJ-CCR

JJ-CCR Radial Scrubber

3050-00

479.34 €

Radial scrubber for JJ-CCR rebreather This scrubber directly replaces the standard one supplied with the unit, without the need for additional couplings. The use of a Radial scrubber gives us several advantages, two of them stand out: More absorbent capacity (3kg), which offers us a longer "official" autonomy (230´) Its peculiar design offers us a best...

Fuera de Stock

Ask us about availability

JJ-CCR

JJ-CCR RBSM - Rebreather Safety Mouthpiece

301820011110001

132.00 €

The new design RBSM offers great security and comfort. The head-strap holds the mouthpiece firmly in position allowing for a very relaxed grip on the bite and significantly reducing jaw fatigue on longer dives. The crucial safety benefit is that the RBSM greatly increases the likelihood that the diver will remain on the loop in the event of going...

En Stock

Available

inicio

JJ-CCR Red silicone O-Ring

2000-22

7.00 €

Silicone O-Ring. It is the one that is mounted on the breathing hose (we usually use it to hold the HUD cable), very useful to always carry it mounted as it serves as an emergency replacement for the base of the Ts.

En Stock

Available

inicio

JJ-CCR Screw for T Lung holding

4100-04

2.00 €

Spare part of the screw used for fixing the T (3 are used) to the base.

En Stock

Available

JJ-CCR

JJ-CCR Scrimnet filter kit Radial

2100-10

12.00 €

Scrimnet filter kit. 1 unit to use in Radial scrubber

En Stock

Available

JJ-CCR

JJ-CCR Scrubber bottom Axial

3060-01

48.76 €

Fuera de Stock

Ask us about availability

JJ-CCR

JJ-CCR Scrubber bottom Radial

3055-00

48.76 €

En Stock

Available

JJ-CCR

JJ-CCR Scrubber nut

2100-20

14.80 €

En Stock

Available

JJ-CCR

JJ-CCR Sensor Cover

2000-60

86.50 €

A travel protection cover is now available from JJ-CCR. This cover will provide the inside of the JJ-head with sturdy protection for; the oxygen solenoid, sensors and threads.

Fuera de Stock

on demand

JJ-CCR

JJ-CCR Shearwater Petrel-3 controller

SH2000-40

1,652.07 €

En Stock

Available

JJ-CCR

JJ-CCR Tool for ADV

2016100000

15.00 €

En Stock

JJ-CCR

JJ-CCR Tool for Tee-ADV Fitting

4100-20

27.75 €

Tool to disassemble the bases of Ts of the rebreather JJ-CCR. Necessary to be able to adequately replace/manage the counter lungs

Fuera de Stock

Ask us about availability

JJ-CCR

JJ-CCR Wing

2012000000

387.00 €

Fuera de Stock

Ask us about availability

JJ-CCR

JJ-CCR wing inner bladder

2300-25

78.00 €

Fuera de Stock

Ask us about availability

JJ-CCR

JJ-CCR XRC Set (X-tended range canister & radial scrubber)

2006020001-XRC

1,649.00 €

The X-tended Range Canister provides the experienced diver with a total runtime of nearly 6 hours. The canister is extended in length by 50mm and the stand is shortened with 50 mm so the overall length of the unit stays the same! The canister comes complete with stand, handle and radial scrubber. All other parts from the original rebreather will fit...

Fuera de Stock

Ask us about availability

JJ-CCR units

JJ-Head Complete (No Sensors)

2000-30

3,304.96 €

View

Fuera de Stock

Ask us about availability

Meg

Male clips for ISC®

HAR-Buckle male 1

2.20 €

The male part clip for the webbing of the counterlungs of the ISC® rebreathers

En Stock

-15%

Available

Computers Bags

Mares Controller Case XR

415184

14.02 € 16.49 €

Inside, this hard case is divided into an open main compartment and a small mesh pocket with zipper closure for storing charging cables or other accessories. The case features a heavy duty zipper with pulleys for easy grip and a D-ring to hold it wherever you want. Complete the Mares look with the micro-injected “Mares XR” logo for extra Mares-style...

En Stock

Available

inicio

Mares HORIZON Charging Clip

48640019

68.80 €

Mares HORIZON Charging Clip without cable

Fuera de Stock

Ask us about availability

inicio

Mares HORIZON Smart battery pack

48640022

135.00 €

Mares HORIZON Charging Clip without cable

Fuera de Stock

Out-of-Stock

BATTERIES

Meg Battery Pack

BB-5Cell AA Pack

25.30 €

Meg Battery Pack NOTE: Due to the last problems of importing spare parts from USA, it would possible the battery packs be the green ones. These battery packs are made of high quality Energizer batteries and are totally warranted.

View

Fuera de Stock

Ask us about availability

Meg

Meg breathing hoses caps (pair)

0042

21.90 €

Fuera de Stock

Out-of-Stock

Meg

Meg canister cover

0044

19.83 €

This scrubber cover was designed to clip on to the main body of the ISC canisters (Meg, Copis, Meg 15 and Tiburon) when the head is off. It is made from unbreakable plastic with a neoprene seal on the under side and a patterned finish on top.This cover will stop your sorb from drying out between dive weeks or keep water and bugs out if your unit is left...

View

Fuera de Stock

Out-of-Stock

Meg

Meg Classic O-Ring kit

Meg O-ring kit

38.54 €

The essential kit of the O-ring, should be mandatory to always carry with us as spare part. It includes the O-Rings that are more exposed to wear and, therefore, are more delicate.

View

En Stock

Available

TANKS & MORE...

MEG DIL Tank Label

ISC DEC Diluent Decal

4.12 €

MEG® DILUENT STICKER Dimensions: 20cm x 5cm

Fuera de Stock

Ask us about availability

Meg

Meg Head bungs (pair)

0043

21.90 €

These o-ringed plastic push in bung's are made to fit the inhale/exhale ports on the Meg head.The bung's will keep out water, bugs and stop air flowing through the scrubber bed helping to stop the sorb from drying out,

Fuera de Stock

Out-of-Stock

Meg

Meg Logo decal

ISC MEG Logo decal

8.90 €

Megalodon rebreather label 204mm x 168mm

View

Fuera de Stock

Ask us about availability

Meg

Meg Lung Bungs (pair)

MLB

41.25 €

This cap is designed to fit over the Meg Counter Lung T-piece entry. This can be used for isolating them from dirty while the unit is stored.SOLD IN A SET OF 2

En Stock

Available

Meg

Meg T-Piece Cap (pair)

MTPC

34.00 €

This cap is designed to fit over the Meg T-piece when its not attached to the lung,This can be used for isolating the loop from the lungs when tying to find leaks or just for protection.SOLD IN A SET OF 2

Fuera de Stock

Ask us about availability

Meg

Meg-15 O-Ring Kit

Meg-15 O-ring kit

32.19 €

Fuera de Stock

megalodon-80lb-363kg-radial-co2-scrubber

Ask us about availability

Meg

MEGALODON 8.0LB/3.63KG RADIAL CO2 SCRUBBER

iscradial8lb

809.92 €

Note: The price for ISC products has been calculated using a currency change 0,79€/$ + taxes + import cost. The price may be affected by a currency change. Please, ask us about the right price before place the order

En Stock

Available

Meg

Megalodon Carriage sensors O-Ring, down one

OR-042

4.12 €

It is the O-Ring that goes between the sensor carriage and the head itself, the smallest one. See attached photo.

En Stock

Available

Meg

Megalodon Carriage sensors upper O-Ring

OR-037

4.90 €

It is the O-ring that is located on the top of the sensor carriage, the largest one. See attached photo.

Fuera de Stock

Out-of-Stock

Meg

Moisture pad for Meg canister

AS-Moisture pad-ASSY (unit)

3.26 €

Moisture pad for Megalodon and Copis canister

View

Fuera de Stock

Out-of-Stock

Meg

Moisture pad for Meg sensor carriage

AS-Moisture pad-Head

3.55 €

Moisture pad for Megalodon and Copis sensor carriage

View

Fuera de Stock

Out-of-Stock

Meg

Narked Meg Stand

NAN0050

297.00 €

View

En Stock

Available

JJ-CCR

Nautec service kit Air / Nitrox

2098220002

37.00 €

Service kit for Nautec® valves used on JJ-CCR and rEvo rebreathers, suitable for Diluent and Oxygen

En Stock

Available

Meg

O-Ring DSV female entry

OR-013

1.64 €

O-ring for ADV S/S coupling, female ADV hose (internal) Image of the product explains it...

Fuera de Stock

Out-of-Stock

Meg

O-Ring for DSV Lever Screw

OR-LeverScrew

2.27 €

View

Fuera de Stock

Ask us about availability

Meg

O-Ring for head/breathing hose

OR-123

3.30 €

O-Ring for head/breathing hose for all ISC€ rebreathers

En Stock

Available

Meg

O-Ring for Meg 15 inhale tube

OR-025

3.14 €

O-Ring for Meg 15 inhale tube (2 o-rings per head)

Fuera de Stock

Out-of-Stock

Meg

O-Ring for Meg and Copis head

OR-259 for head

4.95 €

The main perimetral O-Ring for the Megalodon and Copis head.

View

En Stock

Available

Meg

O-Ring for Meg® Radial Scrubber

OR-247 Radial Scrubber

3.26 €

Meg® Radial Scrubber O-Ring

En Stock

Available

Meg

O-Ring for Pathfinder head

OR-130 PF head

3.30 €

The main perimetral O-Ring for the Pathfinder head.

En Stock

Available

Meg

O-ring for T piece base

OR-233 T piece base

3.11 €

Standar O-Ring used at the T-pieces base, between the Ts and the counterlung

En Stock

O-Ring for the ISC® APECS handset display

Available

Meg

O-Ring for the ISC® APECS handset display

OR-235 HS display

4.95 €

O-ring for the display of the APECS Handset (handset of the Megalodon and Copis)

En Stock

Available

Meg

O-Ring head to scrubber

or-127

3.00 €

O-Ring to use on the inhale tube to the scrubber, up to use with Meg classic, Meg 15 and Meg TIBURON

En Stock

Available

Meg

O-Ring Large for Jaksa Solenoid

OR-010 Jaksa Large

1.64 €

O-Ring Large for Jaksa Solenoid

En Stock

Available

rEvo

O-Ring Set for rEvo III

R212

46.20 €

Fuera de Stock

Out-of-Stock

Meg

O-Ring Small for Jaksa Solenoid

OR-009 Jaksa small

1.64 €

View

Fuera de Stock

Ask us about availability

inicio

Pair of breathing hose protectors

jdive0031

34.50 €

Pair of breathing hoses protectors. The sections are open with Velcro closure, to facilitate the assembly and disassembly operation. The measurements of each section are 50cm x 20cm

Fuera de Stock

Ask us about availability

Meg

Pathfinder O-Ring kit

Path O-Ring kit

32.19 €

The essential kit of the O-ring, should be mandatory to always carry with us as spare part. It includes the O-Rings that are more exposed to wear and, therefore, are more delicate.

Fuera de Stock

Out-of-Stock

Meg

Radial Scrubber 5,5lb (2,49kg)

RAD5.5

809.92 €

View

En Stock

Available

JJ-CCR

Rebreather o-ring kit

2000-00

42.00 €

En Stock

Available

rEvo

rEvo & HORIZON bytepiece strap

48650000

20.00 €

Silicone strap for rEvo and HORIZON mouthpieces, 15.5mm wide model

En Stock

Available

rEvo

rEvo & HORIZON silicone bytepiece with lipshield

48650001

55.00 €

Fuera de Stock

Ask us about availability

inicio

rEvo 4-pin wet Matable Connector to Dual Molex

R572

83.00 €

4 pin wet connector to two mole connections. Mainly used for the connection of the rEvodream to the sensors. Also suitable for connecting the Shearwater NERD as a Backup computer to only 2 sensors

En Stock

Available

rEvo

rEvo and Horizon Murshroom valve

48600234

24.00 €

NOTE: the price is for one unit, not the pair

En Stock

Available

rEvo

rEvo and HORIZON silicone bytepiece with strap complete

48600235

95.00 €

Boquilla de silicona original rEvo

Fuera de Stock

On demand

inicio

rEvo BOV compete set

R610

500.00 €

BOV including Spiders, Valves, MP hose, Connections to Breathing Hose... al the things you need to assembly the BOB to your rEvo rebreather.

En Stock

Available

inicio

rEvo Breathing hose

R518

79.20 €

New rEvo Silicone breathing hose. The new ones are shorter than the old rubber.

Fuera de Stock

Ask us about availability

rEvo

rEvo DiveCan Battery Box (NO rMS)

R411B / 64

420.00 €

Battery box kit for the rEvo model DiveCan NON rMS with waterproof solenoid connections

En Stock

Available

rEvo

rEvo Flat Base for dual HUD

R545B

9.00 €

En Stock

Available

REGULATOR ACCESORIES

rEvo male/male 9/16" to 3/8" adapter

R551

14.00 €

En Stock

Available

rEvo

rEvo MAV Button Removal Tool

48600829

40.80 €

En Stock

Available

rEvo

rEvo MAV DIL manual add button

R567B

24.79 €

En Stock

Available

rEvo

rEvo MAV O2 manual add button

R567A

24.79 €

Fuera de Stock

Ask us about availability

rEvo

rEvo Micro Stand 50mm

R603

314.60 €

Keep your unit standing hassle-free with the rEvo-specific stand. This is the 50mm height option. Includes all necessary mounting hardware. Fits all units from January 2019 and younger. Units from before January 2019 need to have a modification on the housing, therefore, please contact us

Fuera de Stock

Ask us about availability

rEvo

rEvo Micro Stand 75mm

R605

314.60 €

Keep your unit standing hassle-free with the rEvo-specific stand. This is the 75mm height option. Includes all necessary mounting hardware. Fits all units from January 2019 and younger. Units from before January 2019 need to have a modification on the housing, therefore, please contact us

Fuera de Stock

Ask us about availability

rEvo

rEvo Mini Stand 50mm

R604

314.60 €

Fuera de Stock

Ask us about availability

rEvo

rEvo Mini Stand 75mm

R606

314.60 €

En Stock

Available

rEvo

rEvo O-ring Set Battery Pack

48620221

2.42 €

En Stock

Available

rEvo

rEvo Quadro Side Fix with CAM Band

60.33 €

Quick tanks fixing. ideal for when traveling without cylinders, being able to easily and quickly assemble any cylinder supplied to us, without the need to assemble the metal flanges of the standard system.

Fuera de Stock

Ask us about delivery time

rEvo

rEvo rEvodream Fixation plates

R517B

31.00 €

rEvodream fixation system for SPG with Miflex hose. Included cable protector

Fuera de Stock

Ask us about availability

rEvo

rEvo rMS DiveCan Battery Box

R411A

390.00 €

Fuera de Stock

Ask us about availability

rEvo

rEvo Solenoid with Orifice inside

48600543

240.00 €

rEvo Solenoid with Orifice inside, waterproof cables

En Stock

Available

inicio

rEvo Splitter

48600566

21.00 €

Molex splitter to connect a sensor to two monitors

En Stock

Available

rEvo

rEvo Tank Fixation Diluent side

R205B

48.76 €

Sistema de fijación para las botellas On-Board compatible con todos los modelos rEvo. Compuesto por: Placa de fijación al chasis 2 x bridas 2 x cintas plásticas de protección.

En Stock

Available

rEvo

rEvo Tank Fixation Oxigen side

48622051

48.76 €

Sistema de fijación para las botellas On-Board compatible con todos los modelos rEvo. Compuesto por: Placa de fijación al chasis 2 x bridas 2 x cintas plásticas de protección.

En Stock

Available

rEvo

rEvo weight pouch

48620226

34.32 €

En Stock

Available

JJ-CCR

Scrimnet filter kit

2100-00

10.60 €

Scrimnet filter kit

En Stock

Available

rEvo

Scrubber Retaining Screw

R223

18.48 €

En Stock

Available

ADAPTERS

Scuba Force 90º fixed elbow for second stage

SFS013

20.66 €

90º fixed elbow for second stage. 9/16" male/female connection

Fuera de Stock

Ask us about availability

SF2 eCCR

SF2 MAV Block Diluent side

DT021OVMET

106.61 €

SF2 rebreather MAV block. This is the block only, does not include hoses, neither push button

Fuera de Stock

On demand

SF2 eCCR

SF2 MAV Block Oxygen side

DT021OVMETOXY

106.61 €

SF2 rebreather MAV block. This is the block only, does not include hoses, neither push button

En Stock

Available

SF2 eCCR

SF2 MAV Push Buttom

DT036-38

32.23 €

SF2 rebreather MAV push button, for both sides Oxygen and Diluent

Fuera de Stock

On demand

SF2 eCCR

SF2 O2 Sidemount Injection

SFSMO2PB

57.02 €

SF2 rebreather Sidemount version push button

Fuera de Stock

Ask us about availability

O2 SENSORS

SF2 Oxygen Sensor

SF2OX

89.00 €

Fuera de Stock

on demand

SF2 eCCR

SF2 Shearwater Petrel-3 DiveCan controller

SH11313

1,890.76 €

Fuera de Stock

Ask us about availability

Shearwater

Shearwater NERD 2 DiveCan AK (4 Pin)

SH12516

1,995.87 €

Fuera de Stock

Ask us about availability

Shearwater

Shearwater NERD 2 DiveCan for rEvo units

R424

1,975.21 €

Specific unit for rEvo Dive Can rebreathers The NERD is delivered with the cable gland ready to mount directly in place of the rEvodream

Fuera de Stock

Ask us about availability

Shearwater

Shearwater Petrel 3 Dive-Can

SH11320

1,404.13 €

The Shearwater Petrel 3 unit with Dive-Can AK 4Pin connection is ideal for connecting to our rebreathers as a PpO2 reader and redundant Deco controller. More and more rebreather manufacturers are resorting to the Dive-Can type connection for the installation of both the main controller and the HUD. It is in this second connection where we can mount the...

Fuera de Stock

Out-of-Stock

Meg

Silicone O-Ring for ISC® T piece

OR-224 T piece O-ring

3.30 €

This is the silicone O-Ring used ta the ISC® rebreathers T pieces

View

Fuera de Stock

Ask us about availability

rEvo

Solenoid with Orifice inside, Type A

R561A

227.27 €

Solenoid with integrated orifice for rEvo rebreather, with flat connection terminals

Fuera de Stock

Ask us about availability

rEvo

Solenoid with Orifice inside, Type B

R561B

240.00 €

Solenoid with integrated orifice for rEvo rebreather, with waterproof connection terminals

En Stock

Available

rEvo

Solenoide with waterproof terminals

R554C

65.29 €

Solenoid with with waterproof terminals for rEvo or any other rebreather

En Stock

Available

rEvo

Sorb Filters

48620203

22.00 €

Sorb Filters two units for repleace the rEvo sorb filters

Showing 1-203 of 203 item(s)