Fuera de Stock Ask us about availability Tools and grease Digital IP Gauge NANIP 72.00 € The Inter-stage pressure checker is precision instrument in a tough housing for everyday use. Perfect for rebreather divers and technical divers to check their inter-stage pressure with a higher degree of accuracy. It is available with a calibration certificate if required. Add to cart
En Stock Available Meg Dust Caps 9/16" NAN0003 29.00 € These dust caps are made to fit any standard 2nd stage hose and reg fitting.One use is to cap the oxygen solenoid and hose of your rebreather or cap the ends of the ADV hoseIt fits the kiss BOV, or can be used simply to protect and keep hoses clean.ALSO FITS ANY STANDARD 9/16 REGULATOR FITTINGThey come as a set 1 male and 1 female (one for the hose and... Add to cart
En Stock Available Knifes & Cutters EEZYCUT 29.90 € The EEZYCUT trilobite is the latest in line cutting technology and design, aimed primarily at cave divers. The kit comes with 2 replacement blades. Add to cart
En Stock Available Knifes & Cutters Eezycut Bungee Mount Pouch BM 00260 19.90 € Cutter pocket for the Eezycut to mount it with bungees. Add to cart
En Stock Available Knifes & Cutters EEZYCUT Flexi/Shoulder Pouch FP 00259 19.90 € The Shoulder/Flexi Pouch is designed for flexibility and greater accessibility options, wrapping easily around webbing, backpack straps etc. 3 1/2 inches in length, and made of 3mm neoprene. An excellent option for those who have preassembled equipment, and do not wish to go through the trouble of disassembling it. Provides a neat seal around any 2 – 2.5... Add to cart
En Stock Available Knifes & Cutters Eezycut Harness Pouch HP 00258 19.90 € The harness pouch is designed to slide onto any 2 to 2 1/2 inch wide webbing for a secure and comfortable fit. (5 to 6cm) The harness pouch is made of 100% nylon webbing. The harness pouch can also act as a wrist pouch for very large gauge straps, such as trimix computers. NOTE: THE CUTTER IS NOT INCLUDED Add to cart
Fuera de Stock New Ask us about availability PpO2 MONITORS HUD 4PIN AK connection FHUD 750.20 € Monitoring device for the O2 partial pressure in Closed-Circuit Rebreathers Very compact HUD Electronics box Fischer connector already assembled (ready to plug and use...) Add to cart
Fuera de Stock New Ask us about availability PpO2 MONITORS HUD Fischer connection FHUD 792.55 € Monitoring device for the O2 partial pressure in Closed-Circuit Rebreathers Very compact HUD Electronics box Fischer connector already assembled (ready to plug and use...) Add to cart
Fuera de Stock Ask us about availability PpO2 MONITORS HUD Molex connection MOLEXHUD 919.48 € Monitoring device for the O2 partial pressure in Closed-Circuit Rebreathers Very compact HUD Electronics box Molex connector already assembled (ready to plug and use...) Add to cart
En Stock Available Cables and adapters JJ-CCR Cell adaptor CTOM-160 34.73 € This adapter is especially suitable to use Molex sensors in our JJ-CCR head NOTE: The ideal cable length is 160mm. Add to cart
Fuera de Stock Ask us about availability Meg Meg breathing hoses caps (pair) 0042 26.50 € Add to cart
Fuera de Stock Ask us about availability Meg Meg Head bungs (pair) 0043 26.50 € These o-ringed plastic push in bung's are made to fit the inhale/exhale ports on the Meg head.The bung's will keep out water, bugs and stop air flowing through the scrubber bed helping to stop the sorb from drying out, Add to cart
Fuera de Stock Ask us about availability Meg Meg Lung Bungs (pair) MLB 49.91 € This cap is designed to fit over the Meg Counter Lung T-piece entry. This can be used for isolating them from dirty while the unit is stored.SOLD IN A SET OF 2 Add to cart
En Stock Available Meg Meg T-Piece Cap (pair) MTPC 41.14 € This cap is designed to fit over the Meg T-piece when its not attached to the lung,This can be used for isolating the loop from the lungs when tying to find leaks or just for protection.SOLD IN A SET OF 2 Add to cart
En Stock Available inicio Molex Connectors (4 units kit) NAN0074 16.00 € 4 units of Molex housings and 8 units of gold plated pins Add to cart
En Stock Available Cables and adapters Molex to Coax adaptor MOLEXTOSMB 34.73 € Adapter cable to be able using Molex sensors in our EVOLUTIONS OR INSPIRATIONS heads and in any other head witch use - have female coaxial connections installed Add to cart
En Stock Available O2 SENSORS Sensor rubber cover RSCOVERBOX50 5.20 € NOTE: Sensor not included Add to cart
En Stock Available Knifes & Cutters Wrist Pouch WP 00257 19.90 € The Wrist Pouch is designed to fit comfortably around your gauge, up to 1.5 inches wide (4.25cm). This provides excellent accessibility in a whole range of potential situations. It is also ideal as a pouch option for those who anticipate much usage or for those on working projects. Please note that this is designed to be worn over neoprene, dry suits, and... Add to cart