DTD

Complete Gear

Wings

Harness & Backplates

Accessories, additional gear

Weighting Systems, STA, tank straps...

Spare parts

En Stock

Available

DTD

DTD Trim pockets for backplate

DTD 2006

12.39 €

Small pockets for attachment to the backplate. Each pocket can carry one piece of weight block (dimensions 8x10x3 cm, 1,5-2 kg).Price is for 1 unit

En Stock

Available

DTD

DTD Weight belt with s-s buckle

DTD 2023

12.08 €

Polypropylene strap 1,5 m with integrated stainless-steel buckle.

En Stock

Available

DTD

DTD Weight inner pocket DOWN-DROP

11.49 €

This is the spare part for the dropdown weight pocket system. There are 2 options: Big:: can carry 2 pcs of standard sized 1,5-2 kg lead blocks. Small: can carry one piece of standard sized 1,5-2 kg lead block.

En Stock

Available

DTD

DTD weighting system DOWN-DROP

69.09 €

Ballast system consists of 2 pockets, which are slipped on a waist strap and fastened to a backplate. Left pocket has a D-ring for mounting a pressure gauge. Inside each pocket is an inner pocket with a handle for inserting the weights. Especially suitable for slim people, and if you need to save some space on your waist strap.

En Stock

DTD Weighting system for single bottle 2

Available

DTD

DTD Weighting system for single bottle

DTD 2001

75.36 €

Ballast system consists of 2 pockets, which are slipped on bottle straps, they include inner throw-away pockets for 2x 3 kg weights. material: Cordura 1100, velcro weight: 0,44

En Stock

Available

Tools

DTD X01 end inflators tool

DTD 3431

15.00 €

Tool for disassembling and tightening the NEW extra flat overpressure valves and elbows of the DTD wings

En Stock

Available

DTD

DTD, Aluminium 3mm Backplate

DTD 3002

107.33 €

Dural backplate made of aluminium alloy resistant to salt water. Backplate is hard anodized. Edges bevelled on a NC cutter. Thanks to low weight of 0,75 kg it is ideal for travelling by plane.

En Stock

Available

DTD

DTD, Backplate Aluminium 3 mm SHORT

DTD 3033

107.33 €

Dural backplate made of aluminium alloy resistant to salt water. Backplate is hard anodized. Edges bevelled on a NC cutter. Thanks to low weight of 0,59 kg it is ideal for travelling by plane.ould dilacerate the strap.Length: 355 mmWidth: 238 mmWeight: 0,59 kgPitch between middle holes: 280 mm (11 inches)

En Stock

Available

Accesories / Weight

DTD, Bolsillo adicional

DTD 2204

23.34 €

En Stock

Available

COMPLEMENTS

DTD, bottle strap with plastic buckle

DTD 2107

16.12 €

DTD bottle strap with high quality plastic buckle. Composed of a strap with a perfect balance between hardness and perfect malleability, a plastic buckle and a ring made of AISI 316 stainless steel. The strap has an anti-slip band on the inside to provide an extra grip. After having tried a multitude straps of this type, we dare to say that this is...

En Stock

DTD

DTD, Short SS Backplate

DTD 3031

116.69 €

Stainless-steel backplate 3 mm made of salt water resistant stainless-steel. Edges bevelled on a NC cutter, manually polised for perfect flattening of sharp edges, which could dilacerate the strap.It is 43 mm shorter and 25 mm narrower than normal size backplate, suitable for not so big people :-)

En Stock

DTD

DTD, SS 3mm Backplate

DTD 3000

116.69 €

Stainless-steel backplate 3 mm made of salt water resistant stainless-steel. Edges bevelled on a NC cutter, manually polised for perfect flattening of sharp edges, which could dilacerate the strap.

En Stock

Available

Spare parts

Elbow O-Ring

DTD-Jun-Cod

2.48 €

Elbow O-Ring for DTD wings.

En Stock

Spare parts

External screw outlet flange

DTD 0000

5.00 €

DTD, inflator - screw outlet flange Female thread to place/fit the inflator elbow Works with wings DTD, ATS, Golem, DUX, Dir Zone, Scuba Force and some Mares wings

En Stock

Available

Spare parts

inflator - end-piece X01

DTD 3400

36.41 €

En Stock

inflator-knee-joint-with-screwed-fitting

Available

Spare parts

inflator - knee joint with screwed fitting

DTD 3406

10.21 €

DTD, inflator - knee joint with screwed fitting

En Stock

Available

Spare parts

inflator - safety valve 1,4 (OPV)

DTD 3407

10.28 €

DTD, inflator - safety valve 1,4 (OPV)

En Stock

Available

Spare parts

Pull ball - non-floatable

DTD 3411

5.00 €

Handle to mount on the drain / overpressure valves (OPV) of the wings and / or jackets.

En Stock

Available

Spare parts

Rubber band for harness cinch

SFWEBBUN

2.40 €

Bungee band for use in the harness, either to hold the backup flashlight, or the remaining strap.Much more comfortable and easy to handle than the classic rubber bands ATTENTION: The price is for one (1) rubber band. The photo shows 6 units for illustrative purposes.

En Stock

Available

Spare parts

Rubber O-ring to fix the inflator hose

A11918012

4.13 €

Rubber O-ring to fix the inflator on left chest D-ring

En Stock

Available

Spare parts

Rubber ring for harness and D-Ring

A11918092

3.31 €

Rubber Ring with 8,0 mmø section, 50mm outer diameter and 85mm inner diameter.This ring is used in OMS wing equipment to keep the D-Rings of the pockets in a 90º position. It is also used in harnesses to stop different elements that we have mounted.

Fuera de Stock

Ask us about availability

DTD

backplate s-s 3 mm complete QUICK-FIX

218.12 €

Stainless-steel backplate, thickness 3 mm, made of salt water resistant stainless-steel with edges bevelled on a NC cutter, manually polished for perfect flattening of sharp edges. It is not possible to take the new QUICK-FIX stainless-steel buckles apart, it is not openable. You can only adjust the harness by pulling the stra

Fuera de Stock

Ask us about availability

Spare parts

Corrugated hose 340 mm DIR

DTD 3421

20.00 €

340mm corrugated windpipe much softer than other standard ones. This allows it to better adapt to the necessary curves it takes on the way from the wing elbow to the inflator end.

Fuera de Stock

Ask us about availability

DTD

DTD Stream twin tank wing 15 / 20 / 25

251.13 €

Showing 25-48 of 76 item(s)