DTD

Complete Gear

Wings

Harness & Backplates

Accessories, additional gear

Weighting Systems, STA, tank straps...

Spare parts

En Stock

Available

Spare parts

Elbow O-Ring

DTD-Jun-Cod

2.48 €

Elbow O-Ring for DTD wings.

En Stock

Spare parts

External screw outlet flange

DTD 0000

5.00 €

DTD, inflator - screw outlet flange Female thread to place/fit the inflator elbow Works with wings DTD, ATS, Golem, DUX, Dir Zone, Scuba Force and some Mares wings

En Stock

Available

Spare parts

inflator - end-piece X01

DTD 3400

36.41 €

En Stock

inflator-knee-joint-with-screwed-fitting

Available

Spare parts

inflator - knee joint with screwed fitting

DTD 3406

10.21 €

DTD, inflator - knee joint with screwed fitting

En Stock

Available

Spare parts

inflator - safety valve 1,4 (OPV)

DTD 3407

10.28 €

DTD, inflator - safety valve 1,4 (OPV)

En Stock

Available

Spare parts

Pull ball - non-floatable

DTD 3411

5.00 €

Handle to mount on the drain / overpressure valves (OPV) of the wings and / or jackets.

En Stock

Available

Spare parts

Rubber band for harness cinch

SFWEBBUN

2.40 €

Bungee band for use in the harness, either to hold the backup flashlight, or the remaining strap.Much more comfortable and easy to handle than the classic rubber bands ATTENTION: The price is for one (1) rubber band. The photo shows 6 units for illustrative purposes.

En Stock

Available

Spare parts

Rubber O-ring to fix the inflator hose

A11918012

4.13 €

Rubber O-ring to fix the inflator on left chest D-ring

En Stock

Available

Spare parts

Rubber ring for harness and D-Ring

A11918092

3.31 €

Rubber Ring with 8,0 mmø section, 50mm outer diameter and 85mm inner diameter.This ring is used in OMS wing equipment to keep the D-Rings of the pockets in a 90º position. It is also used in harnesses to stop different elements that we have mounted.

Fuera de Stock

Ask us about availability

DTD

backplate s-s 3 mm complete QUICK-FIX

218.12 €

Stainless-steel backplate, thickness 3 mm, made of salt water resistant stainless-steel with edges bevelled on a NC cutter, manually polished for perfect flattening of sharp edges. It is not possible to take the new QUICK-FIX stainless-steel buckles apart, it is not openable. You can only adjust the harness by pulling the stra

Fuera de Stock

Ask us about availability

Spare parts

Corrugated hose 340 mm DIR

DTD 3421

20.00 €

340mm corrugated windpipe much softer than other standard ones. This allows it to better adapt to the necessary curves it takes on the way from the wing elbow to the inflator end.

Fuera de Stock

Ask us about availability

DTD

DTD Stream twin tank wing 15 / 20 / 25

251.13 €

Fuera de Stock

Ask us about availability

DTD

DTD DIR Harness + SS backplate

179.32 €

Complete Backplate/harness set Aluminuml backplate, thickness 3 with PA harness, stainless-steel D-rings and stoppers, stainless-steel buckle, crotch strap, buoy pocket and pocket with knife. Choose between the different color options of buoy storage

Fuera de Stock

Ask us about availability

DTD

DTD KIDDO complete

354.21 €

Fuera de Stock

Ask us about availability

DTD

DTD QUICK-FIX Harness

DTD 2111

75.14 €

Fuera de Stock

Ask us about availability

DTD

DTD RING 14/17/20

208.30 €

Circular style wing for diving with a single tank. Comes out from time proven double layer model CUB. Use for single tank 12 - 18 l. Part of the wing are also 2 pieces of rubber pins in the middle area of wing which allow to attach the single bottle WITHOUT the need to use single tank adapter.

Fuera de Stock

Ask us about availability

DTD

DTD Ring Col, 14, 17

208.30 €

Fuera de Stock

On demand

Harness & Backplates

DTD sidemount harness

DTD 2102

127.93 €

Fuera de Stock

Ask us about availability

Weighting Systems, STA, tank straps...

DTD Single tank adapter

DTD 3003

49.30 €

Fuera de Stock

Ask us about availability

DTD

DTD SS backplate 3 mm with adjustable harness

218.12 €

Stainless-steel backplate, thickness 3 or 6 mm Stainless Steel or 3mm aluminium, made of salt water resistant metal with edges bevelled on a NC cutter, manually polished for perfect flattening of sharp edges.

Fuera de Stock

Ask us about availability

DTD

DTD Stream CCR wing

247.11 €

This wing is especilly designed for diving with CCR rebreathers. buoyancy: 150N, 200 N or 250N material: cover Cordura 2000, high-frequency welded inner tube Cordura 560 with PU seam coating, zip YKK weight: 1,47 kg

Fuera de Stock

Ask us about availability

Wings

DTD Stream Ring 17

DTD 1116

259.71 €

Circular style wing for diving with doubles. STREAM RING 17 was designed for diving with double tanks from 2x7-2x8 and stage. Due to the small profile, along with sufficient lift, this wing is especially suitable for recreational and also tec diving.

Fuera de Stock

Ask us about availability

DTD

DTD STREAM RING 20 col. RED Wing

261.03 €

Circular style wing for diving with doubles. STREAM RING 20 was designed for diving with double tanks from 2x7-2x12 and stage. Due to the small profile, along with sufficient lift, this wing is especially suitable for recreational and also tec diving. weight: 1.22 kgmaterial: cover Cordura 1000, high-frequency welded inner tube Cordura 560 with PU seam...

Fuera de Stock

Ask us about availability

DTD

DTD Stream RIng CCR 20 wing

DTD 1202

247.11 €

Circular wing is especilly designed for diving with CCR rebreathers.Height of empty wing = 65 cm, width = 70 cm. buoyancy: 200 N material: cover Cordura 2000, high-frequency welded inner tube Cordura 560 with PU seam coating, zip YKK weight: 1,42

Fuera de Stock

Ask us about availability

DTD

DTD Stream Ring Lite 20

DTD 1106

246.70 €

Del ya conocido modelo Stream Ring, este otro en versión ligera. Cordura 1000 para el saco exterior y 560 para la vejiga interna. 20 litros de capacidad perfectos para bibotellas de 2x12 y etapas.

Fuera de Stock

Ask us about availability

DTD

DTD Stream Ring Twin Tank Wing 20, 23

261.03 €

Fuera de Stock

DTD twin tank set, Stream Ring 20 / 23 2

On sale!

Ask us about availability

DTD

DTD twin tank set, Stream Ring 20 / 23

405.00 €

DTD twin tank set consisting of the Stream Ring 20 or 23 wing, DIR type continuous harness and 3mm SS backplate.Choose your color combination from the drop-down menus.

Fuera de Stock

Ask us about availability

DTD

DTD twin tank Set, Stream Ring Col

404.90 €

DTD twin tank set consisting of the Stream Ring Col wing, DIR type continuous belt harness and steel backplate in 3 mmChoose your wing color from the drop-down menus.

Fuera de Stock

DTD twin tanks Set, Stream Ring Stripe 2

Ask us about availability

DTD

DTD twin tanks Set, Stream Ring Stripe

404.95 €

DTD twin tank set consisting of the Stream Ring Stripe wing, DIR type continuous belt harness and steel backplate in 3 mm thick Choose your color wing from the drop-down menus.

Fuera de Stock

Ask us about availability

Tools

DTD Wings valves tool

DTD 3430

6.00 €

Tool for disassembling and tightening the NEW extra flat overpressure valves and elbows of the DTD wings

Fuera de Stock

DTD, Aluminium single tank Ring 14-17-20 Set

Ask us about availability

Complete Gear

DTD, Aluminium single tank Ring 14-17-20 Set

399.17 €

Single Tank Set DTD Ring 14-17-20 This set consisting of DTD Ring 14 wing, 3mm aluminium backplate with continuous webbing harness and double DTD tank holder straps.

Fuera de Stock

Ask us about availability

DTD

DTD, DIAMOND WING

743.90 €

DIAMOND shaped wing and complete harness. Developed and tested by Czech best cave divers, used during our explorations on Yucatan, where we have 64 km long UW system - 4th longest on the world! 2 sizes - 10 (M) and 13 litres (L). Material: Cordura 1000, high-frequency welded inner tube Cordura 560 with PU seam coating, zip RiRi, stainless-steel AISI...

Fuera de Stock

Ask us about availability

DTD

DTD, SS Ring 14 Lite single tank

1800-1005-2x2107

412.40 €

Single Tank Set DTD Ring 14 Lite This set consisting of DTD Ring 14 wing, 3mm stainless steel backplate with continuous webbing harness and double DTD tank holder straps.

Fuera de Stock

Ask us about availability

Complete Gear

DTD, SS single tank Ring 14-17-20 Set

438.84 €

Single Tank Set DTD Ring 14-17-20 This set consisting of DTD Ring 14 wing, 3mm stainless steel backplate with continuous webbing harness and double DTD tank holder straps.

Fuera de Stock

Ask us about availability

DTD

DTDSTREAM RING 20 stripe Wing

261.03 €

Circular style wing for diving with doubles. STREAM RING 20 was designed for diving with double tanks from 2x7-2x12 and stage. Due to the small profile, along with sufficient lift, this wing is especially suitable for recreational and also tec diving. weight: 1.22 kg material: cover Cordura 1000, high-frequency welded inner tube Cordura 560 with PU seam...

Fuera de Stock

Ask us about availability

DTD

wing for single RING 14 Lite

DTD 1005

200.79 €

Showing 37-72 of 76 item(s)