DTD

Complete Gear

Wings

Harness & Backplates

Accessories, additional gear

Weighting Systems, STA, tank straps...

Spare parts

En Stock

Available

DTD

DTD ADJUSTABLE Harness

DTD 2101

75.14 €

En Stock

Available

Harness & Backplates

DTD Backplate 6mm

DTD 3001

198.81 €

Stainless-steel backplate 6 mm made of salt water resistant stainless-steel. Edges bevelled on a NC cutter, manually polised for perfect flattening of sharp edges, which could dilacerate the strap.

En Stock

Accesories / Weight

DTD BACKPLATE BALLAST

DTD 2000

75.64 € 79.62 €

En Stock

Available

Accesories / Weight

DTD BELT POCKET

DTD 2203

25.80 €

En Stock

DTD Bottle strap with s-s buckle (short)

Available

DTD

DTD Bottle strap with s-s buckle (short)

DTD 2113

24.68 €

Indestructible buckle, HDPE pad, protecting the bottle from scratching, strap made from non-elongation material. Stitched on a strip of antislip rubber. Only works with tanks of max. 171mmø After having tried a multitude straps of this type, we dare to say that this is undoubtedly the best bottle holder strap that we have ever tried.

En Stock

bottle-strap-with-stainless-steel-buckle

Available

COMPLEMENTS

DTD bottle strap with stainless-steel buckle

DTD 2106

23.43 €

Indestructible buckle, HDPE pad, protecting the bottle from scratching, strap made from non-elongation material. Stitched on a strip of antislip rubber. After having tried a multitude straps of this type, we dare to say that this is undoubtedly the best bottle holder strap that we have ever tried.

Fuera de Stock

Ask us about availability

DTD

DTD buoy pocket

30.82 €

En Stock

Available

Spare parts

DTD Corrugated hose

21.00 €

Corrugated Hose Corrugated Hose in three differents sizes: option 1: 380mm Option 2: 400mm Option 3: 600mm These hoses work with these brands: DTD, ATS, Golem, DUX, Dir Zone.

En Stock

Available

DTD

DTD Crotch strap with D-rings

DTD 2104

13.70 €

Polypropylene strap with integrated D-ring and one loose D-ring and stopper.

En Stock

Available

DTD

DTD DIR Harness + SS backplate 3-6mm

200.43 €

Complete Backplate/harness set Stainless-steel backplate, thickness 3 or 6mm with PA harness, stainless-steel D-rings and stoppers, stainless-steel buckle, crotch strap, buoy pocket and pocket with knife. Choose between the different color options of buoy storage

En Stock

Available

DTD

DTD HARNESS

DTD 2100

55.24 €

HARNESS DTD The package includes: - 4m strap with hole - knife with sheet - stainless-steel buckle - rubber band (4x narrow, 1x wide) - crotch strap with one integrated D-ring - 2x D-ring bend - 2x D-ring normal - 5x belt stoppers

En Stock

Available

Spare parts

DTD Inflator - end-piece J01

DTD 3422

36.41 €

The J01 Raw power has an improved piston-based system, highly sensitive and gradual, specifically designed for technical/professional use and addressing the needs of technical diving where compliance with the highest standards is a must.

En Stock

Spare parts

DTD inflator end piece X01K

DTD 3401

32.26 €

En Stock

Accesories / Weight

DTD Inner pocket spare part

13.14 €

En Stock

Available

Tools

DTD J01 end inflators tool

DTD 3433

11.00 €

Tool for disassembling and tightening the NEW extra flat overpressure valves and elbows of the DTD wings

En Stock

Available

Spare parts

DTD knee joint with screwed fitting Inflator low profile

DTD 3423

14.45 €

DTD, inflator - knee joint with screwed fitting low profile

En Stock

Available

Spare parts

DTD OPV Inflator - safety valve 1,2 (OPV - low profile)

DTD 3424

10.27 €

New generation DTD wings overpressure valve outer part, not suitable for wings with standard OPV

En Stock

Available

DTD

DTD PA webbing 50 mm - 4 m

DTD 2105

14.05 €

Special-made, hard, very resistant strap for backplate with a grommet for a screw.

En Stock

Available

DTD

DTD Ring 12

207.11 €

Lightweight ring model wing for juniors, volume 12 litres. Double-shell construction but the cover is made of lighter material Cordura 1000 red colour. Inflator end-piece is SHARK which is more suitable for smaller hands, softer to press the buttons . Part of the wing are also 2 pieces of rubber pins in the middle area of wing which allow to attach the...

En Stock

Available

DTD

DTD Ring Stripe 14 / 17

208.30 €

Circular style wing for diving with a single tank. Comes out from time proven double layer model CUB. Use for single tank 12 l. Part of the wing are also 2 pieces of rubber pins in the middle area of wing which allow to attach the single bottle WITHOUT the need to use single tank adapter.INCLUDED in delivery- 1x inflator LP hose 51 cm- 1x screw set for...

En Stock

Available

Accessories

DTD shoulder pads - pair

DTD 2215

11.60 €

shoulder pads - pairComfortable shoulder pads

En Stock

DTD

DTD SIDEMOUNT BACK PAD

DTD 2206

35.65 €

sidemount back padAdditional rear part of backplate for attaching the sidemount bottles.

En Stock

Accessories, additional gear

DTD Small back pad / buoy pocket

DTD 2200-S

30.82 €

DTD KIDDO Back Pad for Small DTD Backplates (NOT SUITABLE for standard-sized backplates) The DTD Back Pad is designed to accommodate a safety or lifting buoy between the backplate and the diver's back. It also protects the back from potential chafing caused by the screws that attach the backplate to the fin. It comes with stainless steel screws for...

En Stock

Available

Accesories / Weight

DTD Trim pocket

DTD 2005

9.08 €

En Stock

Available

DTD

DTD Trim pockets for backplate

DTD 2006

12.39 €

Small pockets for attachment to the backplate. Each pocket can carry one piece of weight block (dimensions 8x10x3 cm, 1,5-2 kg).Price is for 1 unit

En Stock

Available

DTD

DTD Weight belt with s-s buckle

DTD 2023

12.08 €

Polypropylene strap 1,5 m with integrated stainless-steel buckle.

En Stock

Available

DTD

DTD Weight inner pocket DOWN-DROP

11.49 €

This is the spare part for the dropdown weight pocket system. There are 2 options: Big:: can carry 2 pcs of standard sized 1,5-2 kg lead blocks. Small: can carry one piece of standard sized 1,5-2 kg lead block.

En Stock

Available

DTD

DTD weighting system DOWN-DROP

69.09 €

Ballast system consists of 2 pockets, which are slipped on a waist strap and fastened to a backplate. Left pocket has a D-ring for mounting a pressure gauge. Inside each pocket is an inner pocket with a handle for inserting the weights. Especially suitable for slim people, and if you need to save some space on your waist strap.

En Stock

DTD Weighting system for single bottle 2

Available

DTD

DTD Weighting system for single bottle

DTD 2001

75.36 €

Ballast system consists of 2 pockets, which are slipped on bottle straps, they include inner throw-away pockets for 2x 3 kg weights. material: Cordura 1100, velcro weight: 0,44

En Stock

Available

Tools

DTD X01 end inflators tool

DTD 3431

15.00 €

Tool for disassembling and tightening the NEW extra flat overpressure valves and elbows of the DTD wings

En Stock

Available

DTD

DTD, Aluminium 3mm Backplate

DTD 3002

107.33 €

Dural backplate made of aluminium alloy resistant to salt water. Backplate is hard anodized. Edges bevelled on a NC cutter. Thanks to low weight of 0,75 kg it is ideal for travelling by plane.

En Stock

Available

DTD

DTD, Backplate Aluminium 3 mm SHORT

DTD 3033

107.33 €

Dural backplate made of aluminium alloy resistant to salt water. Backplate is hard anodized. Edges bevelled on a NC cutter. Thanks to low weight of 0,59 kg it is ideal for travelling by plane.ould dilacerate the strap.Length: 355 mmWidth: 238 mmWeight: 0,59 kgPitch between middle holes: 280 mm (11 inches)

En Stock

Available

Accesories / Weight

DTD, Bolsillo adicional

DTD 2204

23.34 €

En Stock

Available

COMPLEMENTS

DTD, bottle strap with plastic buckle

DTD 2107

16.12 €

DTD bottle strap with high quality plastic buckle. Composed of a strap with a perfect balance between hardness and perfect malleability, a plastic buckle and a ring made of AISI 316 stainless steel. The strap has an anti-slip band on the inside to provide an extra grip. After having tried a multitude straps of this type, we dare to say that this is...

En Stock

DTD

DTD, Short SS Backplate

DTD 3031

116.69 €

Stainless-steel backplate 3 mm made of salt water resistant stainless-steel. Edges bevelled on a NC cutter, manually polised for perfect flattening of sharp edges, which could dilacerate the strap.It is 43 mm shorter and 25 mm narrower than normal size backplate, suitable for not so big people :-)

En Stock

DTD

DTD, SS 3mm Backplate

DTD 3000

116.69 €

Stainless-steel backplate 3 mm made of salt water resistant stainless-steel. Edges bevelled on a NC cutter, manually polised for perfect flattening of sharp edges, which could dilacerate the strap.

Showing 1-36 of 76 item(s)