Fuera de Stock -5% Ask us about availability DTD backplate s-s 3 mm complete QUICK-FIX 250.73 € 263.93 € Stainless-steel backplate, thickness 3 mm, made of salt water resistant stainless-steel with edges bevelled on a NC cutter, manually polished for perfect flattening of sharp edges. It is not possible to take the new QUICK-FIX stainless-steel buckles apart, it is not openable. You can only adjust the harness by pulling the stra Add to cart
En Stock Available Spare parts Corrugated hose 340 mm DIR DTD 3421 24.20 € 340mm corrugated windpipe much softer than other standard ones. This allows it to better adapt to the necessary curves it takes on the way from the wing elbow to the inflator end. Add to cart
Fuera de Stock Ask us about availability DTD DTD Stream twin tank wing 15 / 20 / 25 303.87 € Add to cart
Fuera de Stock Ask us about availability Harness & Backplates DTD Backplate 6mm DTD 3001 240.56 € Stainless-steel backplate 6 mm made of salt water resistant stainless-steel. Edges bevelled on a NC cutter, manually polised for perfect flattening of sharp edges, which could dilacerate the strap. Add to cart
Fuera de Stock -5% Out-of-Stock Accesories / Weight DTD BACKPLATE BALLAST DTD 2000 91.52 € 96.34 € View
Fuera de Stock Ask us about availability DTD DTD Bottle strap with s-s buckle (short) DTD 2113 28.35 € Indestructible buckle, HDPE pad, protecting the bottle from scratching, strap made from non-elongation material. Stitched on a strip of antislip rubber. Only works with tanks of max. 171mmø After having tried a multitude straps of this type, we dare to say that this is undoubtedly the best bottle holder strap that we have ever tried. Add to cart
En Stock Available COMPLEMENTS DTD bottle strap with stainless-steel buckle DTD 2106 28.35 € Indestructible buckle, HDPE pad, protecting the bottle from scratching, strap made from non-elongation material. Stitched on a strip of antislip rubber. After having tried a multitude straps of this type, we dare to say that this is undoubtedly the best bottle holder strap that we have ever tried. Add to cart
En Stock Available Spare parts DTD Corrugated hose 24.20 € Corrugated Hose Corrugated Hose in three differents sizes: option 1: 380mm Option 2: 400mm Option 3: 600mm These hoses work with these brands: DTD, ATS, Golem, DUX, Dir Zone. Add to cart
En Stock Available DTD DTD Crotch strap with D-rings DTD 2104 16.58 € Polypropylene strap with integrated D-ring and one loose D-ring and stopper. Add to cart
Fuera de Stock Ask us about availability DTD DTD DIR Harness + SS backplate 216.98 € Complete Backplate/harness set Aluminuml backplate, thickness 3 with PA harness, stainless-steel D-rings and stoppers, stainless-steel buckle, crotch strap, buoy pocket and pocket with knife. Choose between the different color options of buoy storage Add to cart
Fuera de Stock -5% Ask us about availability DTD DTD DIR Harness + SS backplate 3-6mm 230.39 € 242.52 € Complete Backplate/harness set Stainless-steel backplate, thickness 3 or 6mm with PA harness, stainless-steel D-rings and stoppers, stainless-steel buckle, crotch strap, buoy pocket and pocket with knife. Choose between the different color options of buoy storage Add to cart
Fuera de Stock Ask us about availability DTD DTD HARNESS DTD 2100 66.84 € HARNESS DTD The package includes: - 4m strap with hole - knife with sheet - stainless-steel buckle - rubber band (4x narrow, 1x wide) - crotch strap with one integrated D-ring - 2x D-ring bend - 2x D-ring normal - 5x belt stoppers Add to cart
En Stock Available Spare parts DTD Inflator - end-piece J01 DTD 3422 44.06 € The J01 Raw power has an improved piston-based system, highly sensitive and gradual, specifically designed for technical/professional use and addressing the needs of technical diving where compliance with the highest standards is a must. Add to cart
En Stock Available Spare parts DTD knee joint with screwed fitting Inflator low profile DTD 3423 17.48 € DTD, inflator - knee joint with screwed fitting low profile Add to cart
En Stock Available Spare parts DTD OPV Inflator - safety valve 1,2 (OPV - low profile) DTD 3424 12.43 € New generation DTD wings overpressure valve outer part, not suitable for wings with standard OPV Add to cart
Fuera de Stock Ask us about availability DTD DTD PA webbing 50 mm - 4 m DTD 2105 17.00 € Special-made, hard, very resistant strap for backplate with a grommet for a screw. Add to cart
En Stock Available DTD DTD Ring 12 250.60 € Lightweight ring model wing for juniors, volume 12 litres. Double-shell construction but the cover is made of lighter material Cordura 1000 red colour. Inflator end-piece is SHARK which is more suitable for smaller hands, softer to press the buttons . Part of the wing are also 2 pieces of rubber pins in the middle area of wing which allow to attach the... Add to cart
Fuera de Stock Ask us about availability DTD DTD RING 14/17/20 252.04 € Circular style wing for diving with a single tank. Comes out from time proven double layer model CUB. Use for single tank 12 - 18 l. Part of the wing are also 2 pieces of rubber pins in the middle area of wing which allow to attach the single bottle WITHOUT the need to use single tank adapter. Add to cart
En Stock Available DTD DTD Ring Col, 14, 17 252.04 € Circular style wing for diving with a single tank. Comes out from time proven double layer model CUB. Use for single tank 12 - 18 l. Part of the wing are also 2 pieces of rubber pins in the middle area of wing which allow to attach the single bottle WITHOUT the need to use single tank adapter INCLUDED in delivery- 1x inflator LP hose 51 cm- 1x screw set... Add to cart
Fuera de Stock Ask us about availability DTD DTD Ring Stripe 14 / 17 252.04 € Circular style wing for diving with a single tank. Comes out from time proven double layer model CUB. Use for single tank 12 l. Part of the wing are also 2 pieces of rubber pins in the middle area of wing which allow to attach the single bottle WITHOUT the need to use single tank adapter.INCLUDED in delivery- 1x inflator LP hose 51 cm- 1x screw set for... Add to cart
Fuera de Stock Ask us about availability DTD DTD Set twin tank, Stream 15 / 20 / 25 479.06 € DTD twin tank set consisting of the Stream 15, 20 or 25 wing, DIR type continuous harness and steel backplate in 3mmChoose your combination from the drop-down menus. Add to cart
En Stock Available Accessories DTD shoulder pads - pair DTD 2215 14.04 € shoulder pads - pairComfortable shoulder pads Add to cart
Fuera de Stock Out-of-Stock DTD DTD SIDEMOUNT BACK PAD DTD 2206 43.14 € sidemount back padAdditional rear part of backplate for attaching the sidemount bottles. View
Fuera de Stock -5% Ask us about availability DTD DTD SS backplate 3 mm with adjustable harness 250.73 € 263.93 € Stainless-steel backplate, thickness 3 or 6 mm Stainless Steel or 3mm aluminium, made of salt water resistant metal with edges bevelled on a NC cutter, manually polished for perfect flattening of sharp edges. Add to cart
Fuera de Stock Ask us about availability DTD DTD Stream CCR wing 299.00 € This wing is especilly designed for diving with CCR rebreathers. buoyancy: 150N, 200 N or 250N material: cover Cordura 2000, high-frequency welded inner tube Cordura 560 with PU seam coating, zip YKK weight: 1,47 kg Add to cart
Fuera de Stock Ask us about availability Wings DTD Stream Ring 17 DTD 1116 314.25 € Circular style wing for diving with doubles. STREAM RING 17 was designed for diving with double tanks from 2x7-2x8 and stage. Due to the small profile, along with sufficient lift, this wing is especially suitable for recreational and also tec diving. Add to cart
Fuera de Stock Ask us about availability DTD DTD STREAM RING 20 col. RED Wing 315.85 € Circular style wing for diving with doubles. STREAM RING 20 was designed for diving with double tanks from 2x7-2x12 and stage. Due to the small profile, along with sufficient lift, this wing is especially suitable for recreational and also tec diving. weight: 1.22 kgmaterial: cover Cordura 1000, high-frequency welded inner tube Cordura 560 with PU seam... Add to cart