Spare parts

Fuera de Stock

Ask us about availability

Apeks wings Spare parts

Apeks 3/4 wings screw Set

48.76 €

Apeks screw set for mounting wing gears (accopling wing to backplate). Made of stainless steel, they have a 20mm long screw. The inner faces of the threads have a rubber gasket that prevents them from unscrewing by themselves. Widths can be set from 25mm to 16mm. The minimum width they reach is 11mm but from 16 onwards, the stud protrudes from the rear.

En Stock

Available

Apeks wings Spare parts

Apeks 3/8 Book Screw set

BT115118

48.76 €

Fuera de Stock

Ask us about availability

Spare parts

Apeks corrugated hose

32.95 €

Apeks Corrugated Hose Corrugated hose for Apeks Wings. Available in two lengths: 42cm (16") 47cm (18")

Fuera de Stock

Ask us about availability

Apeks wings Spare parts

Apeks Elbow for WTX wings

bc911537

4.50 €

Fuera de Stock

Product available with different options

Apeks wings Spare parts

Apeks elbow with dump valve

3.45 €

Spare parts for Apeks elbow with bleed for Apeks WTX and PSD wings.Choose the necessary part from the drop-down menu according to the numbering marked in the drawing 1: Elbow fixing ring 2: Elbow body 3: Purge mechanism seat 4: Purge mechanism body 5: Purge mechanism spring 6: Purge mechanism outer seat 7: Cable anchoring clip 8: Teflon coated 42cm steel...

View

Fuera de Stock

Ask us about availability

Apeks wings Spare parts

Apeks end inflator mouthpiece

15759

4.30 €

Mouthpiece for the end inflator of the Apeks wings.

En Stock

Spare Parts & Accessories

Apeks Exotec Screw/Washer Kit

BC911652

3.50 €

Fuera de Stock

Out-of-Stock

Apeks wings Spare parts

Apeks Inflator Insert Module

BC911184

34.28 €

View

En Stock

-20%

Apeks wings Spare parts

Apeks Inflator Insert Module

BC911194

27.42 € 34.28 €

Fuera de Stock

Out-of-Stock

Apeks wings Spare parts

Apeks WTX Inner Blade wings D30 and D40

BC911541

69.87 €

Inner bladder for Apeks WTX wings models 30 and 40 NOTE: the picture is illustrative only and may not match the specific model

View

En Stock

Available

Apeks wings Spare parts

Apeks-Aqualung OPV wings and Jackets

2.20 €

Spare parts for Apeks wings and Aqualung jackets. Single parts or complete kits. Choose the necessary one in the drop-down menu according to the numbering visible in the image and described below.

En Stock

Available

BUNGEE MOUNTS/COMPASS

BUNGEE in 4, 5, 6 and 8mm

1.12 €

Price per meter

Fuera de Stock

Out-of-Stock

Spare parts

Combi Inflator tool

80056

4.00 €

Tool to be able to disassemble the inflator end and perform its maintenance. The tool also incorporates the notches to disassemble the knobs of the tanks valves

View

En Stock

Available (48-72h)

Spare parts

Combi Inflator tool

DT-20

7.60 €

Tool to be able to disassemble the inflator end and perform its maintenance. The tool also incorporates the notches to disassemble the knobs of the tanks valves

En Stock

Available

Spare parts

Complete elbow assembly

A11918022

18.24 €

Complete elbow kit for OMS wings manufactured before 2015, Halcyon manufactured before 2018 and many other brands such as Xdeep, Dive Rite, Hollis, Tecline, Hog, EDGE ... Ask us if you have any questions-doubts about compatibility with your wing gear

Fuera de Stock

On demand

Spare parts

copy of Halcyon Zero Gravity Inner bladder (with upgrade kit)

14080100 ZG

120.00 €

Halcyon Zero Gravity Wing Inner Bladder Replacement NOTE: Old wing bladders are no longer available. In order to replace the bladder on older Halcyon wings the thread upgrade kit is required as the new thread screws have changed. This product includes everything needed to update threads. The bladder includes and installs the males for mounting the elbow...

En Stock

Available

Spare parts

copy of Service Kit for X01 end Inflator

DTD 3429

30.00 €

Box with 10 services for the J01 end inflator used in DTD end inflators and in others brands... Picture could not match with the right kit...

Fuera de Stock

Ask us about availability

Spare parts

Corrugated hose 340 mm DIR

DTD 3421

20.00 €

340mm corrugated windpipe much softer than other standard ones. This allows it to better adapt to the necessary curves it takes on the way from the wing elbow to the inflator end.

En Stock

Available

Spare parts

Corrugated universal hose (OMS)

15.46 €

This corrugated hose is used to connect the BC to the power inflator. These standard corrugated hoses are compatible with both wings and regular BCs. This hose is perfect as a spare, especially for brands like:OMS, Halcyon, Dive Rite, xDEEP, IST, Hollis… and more brands…. Choose your size: Option 1: 32,5cm (13") Option 2: 40cm (16") Option 3: 48cm (19")

En Stock

Available

Spare and accessories

Cressi direct system O-Ring kit

EIZ 750080

6.00 €

O-Ring kit for the maintenance of the Cressi Direct System inflator

Fuera de Stock

Ask us about availability

inicio

Crotch strap 5cm wide ( 2")

30045

12.27 €

Crotch strap 5cm wide and very soft to the touch to prevent damage to the diving suit and make it more comfortable when closing the legs around it. It has a front D-Ring up to fix the scooter, and also a rear D-Ring.

En Stock

Available

Spare parts

Double Gasket

A11918020

2.94 €

This is the gasket that goes between the male and female pieces that serve as seats for the overpressure valves and wing elbows. Measures: Outer diameter: 50mm Inner diameter: 25mm

En Stock

Available

Spare parts

DTD Corrugated hose

21.00 €

Corrugated Hose Corrugated Hose in three differents sizes: option 1: 380mm Option 2: 400mm Option 3: 600mm These hoses work with these brands: DTD, ATS, Golem, DUX, Dir Zone.

Fuera de Stock

Ask us about availability

Spare parts

DTD Inflator - end-piece J01

DTD 3422

36.41 €

The J01 Raw power has an improved piston-based system, highly sensitive and gradual, specifically designed for technical/professional use and addressing the needs of technical diving where compliance with the highest standards is a must.

Fuera de Stock

Out-of-Stock

Spare parts

DTD inflator end piece X01K

DTD 3401

32.26 €

View

En Stock

Available

Spare parts

DTD knee joint with screwed fitting Inflator low profile

DTD 3423

14.45 €

DTD, inflator - knee joint with screwed fitting low profile

En Stock

Available

DTD

DTD PA webbing 50 mm - 4 m

DTD 2105

14.05 €

Special-made, hard, very resistant strap for backplate with a grommet for a screw.

En Stock

Available

DTD

DTD Weight inner pocket DOWN-DROP

11.49 €

This is the spare part for the dropdown weight pocket system. There are 2 options: Big:: can carry 2 pcs of standard sized 1,5-2 kg lead blocks. Small: can carry one piece of standard sized 1,5-2 kg lead block.

En Stock

Available

Spare parts

Elbow Assembly with OVP with cable

28.57 €

Elbow Assembly with OVP with cable suitable. There are 3 lengths options for the cable: 33cm 40cm 48cm

En Stock

Available

Spare parts

Elbow O-Ring

DTD-Jun-Cod

2.48 €

Elbow O-Ring for DTD wings.

En Stock

Available

Spare parts

Elbow O-Ring

0.67 €

Replacement O-ring for the trachea elbow. OPTION 1: Wings manufactured after 2015. (Dimensions: outside 38mmø, inside 25mmø and 3.8mm thick) OPTION 2: Wings manufactured before 2015 and also for Halcyon, Dive Rite, IST, Xdeep, Hollis, EDGE, HOG ... (Dimensions: Outside 38mmø, Inside 25mmø, and 3mm thick) Choose the appropriate one you need from the...

En Stock

Available

Spare parts

Elbow OMS (newest version, universal)

A11918023

4.29 €

The newly designed OMS elbow can be used in any wing of the most common such as, obviously, all OMS, halcyon, Edge, Xdeep, Dive Rite, etc ... if you have any questions, ask us. To this new design has been added a very marked stretch mark, in this way the trachea is much more secured once installed and even losing the flange it is highly unlikely that the...

En Stock

Spare parts

Elbow universal

A11918023-uni

4.29 €

Universal elbow suitable for a multitude of brands such as: Halcyon Dive Rite Hollis Tecline OMS Contact us if you have questions about compatibility with your wing

En Stock

Available

Spare parts

End Inflator Mouthpiece

AC-024-0

9.92 €

Replacement mouthpiece for wing end inflator: Xdeep, Dive Rite, Halcyon, OMS, Hollis, Tecline…

En Stock

Available

Spare parts

EPDM Rubber Band for Harness

A11918011

1.24 €

En Stock

Spare parts

External screw outlet flange

DTD 0000

5.00 €

DTD, inflator - screw outlet flange Female thread to place/fit the inflator elbow Works with wings DTD, ATS, Golem, DUX, Dir Zone, Scuba Force and some Mares wings

En Stock

Available

Spare parts

Halcyon 90-Degree Elbow for Wing

14.070.014

14.69 €

Halcyon Elbow (Wing/Corrugated Hose) suitable for all Halcyon Wings.The elbow is the connection between the wing and the corrugated hose.Halcyon Elbow (Wing/Corrugated Hose)- Connection between wing und corrugated hose- Suitable for all Halcyon wings- 90 degree elbow- Scope of delivery: elbow, union nut with thread, gasket

Fuera de Stock

On demand

Spare parts

Halcyon CCR 35 Inner bladder (new version)

10000923 Coa

91.00 €

Halcyon CCR 35 Wing Inner Bladder Replacement The bladder includes and installs the males for mounting the elbow and the overpressure/drain valve, both males are the ones with the new thread pitch, contact us if you need the old thread pitches and we will supply you the upgrade kit NOTE: The picture could not match with the real product...

Fuera de Stock

On demand

Spare parts

Halcyon CCR 35 Inner bladder (with upgrade kit)

14080100 CCR 35

120.00 €

Halcyon CCR 35 Wing Inner Bladder Replacement NOTE: Old wing bladders are no longer available. In order to replace the bladder on older Halcyon wings the thread upgrade kit is required as the new thread screws have changed. This product includes everything needed to update threads. The bladder includes and installs the males for mounting the elbow and the...

Fuera de Stock

On demand

Spare parts

Halcyon Contour Inner bladder (new version)

14080050 Coa

91.00 €

Halcyon Contour Wing Inner Bladder Replacement The bladder includes and installs the males for mounting the elbow and the overpressure/drain valve, both males are the ones with the new thread pitch, contact us if you need the old thread pitches and we will supply you the upgrade kit NOTE: The picture could not match with the real product...

Fuera de Stock

On demand

Spare parts

Halcyon Contour Inner bladder (with upgrade kit)

14080100 Con

120.00 €

Halcyon Contour Wing Inner Bladder Replacement NOTE: Old wing bladders are no longer available. In order to replace the bladder on older Halcyon wings the thread upgrade kit is required as the new thread screws have changed. This product includes everything needed to update threads. The bladder includes and installs the males for mounting the elbow and...

Fuera de Stock

On demand

Spare parts

Halcyon Contour S Inner bladder (new version)

14080051 Coa

91.00 €

Halcyon Contour S Wing Inner Bladder Replacement The bladder includes and installs the males for mounting the elbow and the overpressure/drain valve, both males are the ones with the new thread pitch, contact us if you need the old thread pitches and we will supply you the upgrade kit NOTE: The picture could not match with the real product...

Fuera de Stock

On demand

Spare parts

Halcyon Contour S Inner bladder (with upgrade kit)

14080100 Con S

120.00 €

Halcyon Contour S Wing Inner Bladder Replacement NOTE: Old wing bladders are no longer available. In order to replace the bladder on older Halcyon wings the thread upgrade kit is required as the new thread screws have changed. This product includes everything needed to update threads. The bladder includes and installs the males for mounting the elbow and...

Fuera de Stock

On demand

Spare parts

Halcyon Eclipse Inner bladder (new version)

91.00 €

Halcyon Eclipse Wing Inner Bladder Replacement The bladder includes and installs the males for mounting the elbow and the overpressure/drain valve, both males are the ones with the new thread pitch, contact us if you need the old thread pitches and we will supply you the upgrade kit

Fuera de Stock

On demand

Spare parts

Halcyon Eclipse Inner bladder (with upgrade kit)

120.00 €

Halcyon Eclipse Wing Inner Bladder Replacement NOTE: Old wing bladders are no longer available. In order to replace the bladder on older Halcyon wings the thread upgrade kit is required as the new thread screws have changed. This product includes everything needed to update threads. The bladder includes and installs the males for mounting the elbow and...

Fuera de Stock

On demand

Spare parts

Halcyon Evolve Inner bladder (new version)

91.00 €

Halcyon Evolve Wing Inner Bladder Replacement The bladder includes and installs the males for mounting the elbow and the overpressure/drain valve, both males are the ones with the new thread pitch, contact us if you need the old thread pitches and we will supply you the upgrade kit

Fuera de Stock

On demand

Spare parts

Halcyon Evolve Inner bladder (with upgrade kit)

120.00 €

Halcyon Evolve Wing Inner Bladder Replacement NOTE: Old wing bladders are no longer available. In order to replace the bladder on older Halcyon wings the thread upgrade kit is required as the new thread screws have changed. This product includes everything needed to update threads. The bladder includes and installs the males for mounting the elbow and the...

Fuera de Stock

On demand

Spare parts

Halcyon Explorer Inner bladder (new version)

91.00 €

Halcyon Explorer Wing Inner Bladder Replacement To use with the 70lb one, choose the Option 55lb The bladder includes and installs the males for mounting the elbow and the overpressure/drain valve, both males are the ones with the new thread pitch, contact us if you need the old thread pitches and we will supply you the upgrade kit

Fuera de Stock

On demand

Spare parts

Halcyon Explorer Inner bladder (with upgrade kit)

120.00 €

Halcyon Explorer Wing Inner Bladder Replacement NOTE: Old wing bladders are no longer available. In order to replace the bladder on older Halcyon wings the thread upgrade kit is required as the new thread screws have changed. This product includes everything needed to update threads. The bladder includes and installs the males for mounting the elbow and...

Fuera de Stock

Out-of-Stock

Spare parts

Halcyon OEM Power inflator

14060102

35.00 €

Halcyon 45º inflator end. Fits most BCDs on the market that require a 1in inner diameter corrugated hose. Also has a steel pin for BCDs that use a pull to dump feature. Sleek streamlined design replacement power inflator for your BC compatible with most 1″ corrugated hoses

View

En Stock

Halcyon Stainless Steel Halycon weight belt buckle

Available

Spare parts

Halcyon Stainless Steel Halycon weight belt buckle

62.040.010

22.00 €

Fuera de Stock

Ask us about availability

Spare parts

Halcyon velcro tab for shoulder strap pad

10.040.022

4.79 €

Velcro tap strip normally used to hold the corrugated hose in the shoulder pad

Fuera de Stock

On demand

Spare parts

Halcyon Zero Gravity Inner bladder (new version)

14080032 Coa

91.00 €

Halcyon Zero Gravity Wing Inner Bladder Replacement The bladder includes and installs the males for mounting the elbow and the overpressure/drain valve, both males are the ones with the new thread pitch, contact us if you need the old thread pitches and we will supply you the upgrade kit NOTE: The picture could not match with the real product...

Fuera de Stock

Ask us about availability

inicio

Harness webbing with Grommet, soft

30044

15.85 €

Harness webbing with a slightly softer hardness than the standard one, ideal for adjustable harnesses that require the webbing to run smoothly through buckles and/or rings. Despite its softness, it is highly resistant and perfect for any type of harness, whether adjustable or continuous webbing. It has a stainless steel eyelet already installed and is...

En Stock

Available

Hollis Spare parts

Hollis complete inflator system

68.55 €

Complete inflation system for Hollis wings, consisting of elbow with female thread and gasket, trachea and inflator end. Available in three sizes: 33cm 41cm 48cm Choose the appropriate one from the drop-down menu

Fuera de Stock

Ask us about availability

Hollis Spare parts

Hollis complete inflator system with valve

208.1061.016

107.40 €

Complete inflator kit with drain valve inserted in the elbow, works with all Hollis wings. Consists in: inflator control 41cm trachea Elbow with drain valve (jacket type)

En Stock

Available

Spare parts

inflator - end-piece X01

DTD 3400

36.41 €

En Stock

inflator-knee-joint-with-screwed-fitting

Available

Spare parts

inflator - knee joint with screwed fitting

DTD 3406

10.21 €

DTD, inflator - knee joint with screwed fitting

En Stock

Available

Spare parts

inflator - safety valve 1,4 (OPV)

DTD 3407

10.28 €

DTD, inflator - safety valve 1,4 (OPV)

En Stock

Available

Spare parts

inflator - screw outlet flange

DTD 3409

10.48 €

DTD, inflator - screw outlet flange Male thread to place the inflator elbow and the overpressure valve. Includes what is displayed in the image The thread pitch where we will attack the outside of the overpressure valve or elbow of the inflator is 51mmø and works with wings DTD, ATS, Golem, DUX, Dir Zone, Scuba Force and some Mares wings

En Stock

Available

Spare parts

Inner coupling

A11918021

3.61 €

Male piece that goes inside the wing, which serves to anchor both the elbow system and the exhaust / drain valve. It is suitable for many wings of the market, for the most common brands such as, OMS prior to 2015, Halcyon old wings*, Edge*, Dive Rite*, Xdeep,* etc... Outer diameter: 49.2mm *NOTE: compatibility refers exclusively to the thread pitch

En Stock

Available

Spare parts

Male nipple

303046

5.37 €

Male nipple for wing inflator end piece

En Stock

OMS Peformance Internal Bladder Mono wings

Available

Spare parts

OMS Peformance Internal Bladder Mono wings

59.58 €

Inner blade for wings manufactured after 2015 Choose the one you need from the dropdown menu

En Stock

Available

Spare parts

OMS Complete Elbow Assembly + 2015

A11918016

9.91 €

To use on wings manufactured after 2015

Fuera de Stock

Ask us about availability

Spare parts

OMS complete wing inflator kit

67.56 €

Completed airway (to use with OMS wings manufactured after 2015): elbow, corrugated hose , inflator and gasket 13", 16" oder 19" Länge

En Stock

OMS Donut Shape Internal Bladder (32 lb.)

OMS Donut Shape Internal Bladder (32 lb.) 2

Available

Spare parts

OMS Donut Shape Internal Bladder (32 lb.)

A11918038

52.61 €

Inner bladder to use as spare part with OMS Performance mono wings manufactured before 2015 The inner bladder does NOT come with the males (the bases for the elbow and the OPV). Related products below...

En Stock

Available

Spare parts

OMS Elbow collar + 2015

A11918025-new

4.12 €

Elbow retainer collar thread for OMS wings manufactured after 2015 (wider threads)

En Stock

-15%

Available

Spare parts

OMS inflator end

a11918013

30.50 € 35.88 €

OMS 45º inflator end. Fits most BCDs on the market that require a 1in inner diameter corrugated hose. Also has a steel pin for BCDs that use a pull to dump feature. Sleek streamlined design replacement power inflator for your BC compatible with most 1″ corrugated hoses

En Stock

Available

Spare parts

OMS OPV cap

A11918030

3.78 €

Over pressure valve cap to use with OMS wings manufactured before 2015. It also works with many other different wings brands, like: Halcyon, Dive Rite, IST, Hollis, HOG, EDGE, etc...

En Stock

Available

Spare parts

OMS Over pressure valve

A11918017

12.27 €

This spare part is only able to use in OMS wings manufactured after 2015

En Stock

Available

Spare parts

OMS Peformance Internal Bladder Double

61.18 €

Inner blade for wings manufactured after 2015 Choose the one you need from the dropdown menu

En Stock

OMS Replacement Inner Pocket ballast system

OMS Replacement Inner Pocket ballast system 2

-15%

Available

OMS

OMS Replacement Inner Pocket ballast system

A11918093

11.43 € 13.45 €

Replacement inner pocket of the vertical OMS ballast system >2018The price is only for the replacement of the inner pocket, the pocket itself that can be seen in the 2nd photo is not included

En Stock

Available

Spare parts

OMS® Complete Over Pressure valve

a11918026

12.27 €

Complete overpressure valve (except the male part inside the bladder, not included) for OMS® wings manufactured before 2015.This valve is the universal type one, are also valid / suitable for and are suitable for a multitude of brands such as Halcyon, EDGE, Dive Rite, Xdeep, etc ... get in touch with us is you could have any doubt about compatibility....

En Stock

Available

Spare parts

OPV retainer

A11918028

0.84 €

Over pressure seat retainer to use with OMS wings manufactured before 2015. It also works with many other different wings brands, like: Halcyon, Dive Rite, IST, Hollis, HOG, EDGE, etc..

En Stock

Available

Spare parts

OPV Seat

A11918027

1.26 €

The OMS O-Ring (to use with OMS wings manufactured before 2015) is for use in the over pressure valve of the wings, however, its also works with these other brands: Halcyon, Dive Rite, IST, Xdeep, Hollis, EDGE, HOG...

En Stock

Available

Spare parts

OPV valves spring type 1

A11918029

0.50 €

This is the spring which is located at the over pressure valves and elbow of the wings This spring has the same diameter at both sides, up and down, 24mm

En Stock

Available

Spare parts

OPV valves spring type 2

legacy parts

0.50 €

This is the spring which is located at the over pressure valves and elbow of the wings This spring is asymmetric, one side has 22mm of diameter and the other one 17mm of diameter

En Stock

Spare parts

Plug DTD for inflator/OPV opening

DTD 3410

9.72 €

DTD blind plug for the overpressure outlets of the wings: DTD, ATS, Golem, DIR Zone, Scuba Force

En Stock

Available

Spare parts

Pull ball - non-floatable

DTD 3411

5.00 €

Handle to mount on the drain / overpressure valves (OPV) of the wings and / or jackets.

En Stock

Available

Jackets Spare Parts

Pull knob Aqualung

BC911473

3.00 €

Handle to mount on the drain / overpressure valves (OPV) of the wings and / or jackets of any type and/or brand

En Stock

Available

Spare parts

Rubber band for harness cinch

SFWEBBUN

2.40 €

Bungee band for use in the harness, either to hold the backup flashlight, or the remaining strap.Much more comfortable and easy to handle than the classic rubber bands ATTENTION: The price is for one (1) rubber band. The photo shows 6 units for illustrative purposes.

En Stock

Available

Spare parts

Rubber O-ring to fix the inflator hose

A11918012

4.20 €

Rubber O-ring to fix the inflator on left chest D-ring

En Stock

Available

Spare parts

Rubber ring for harness and D-Ring

A11918092

3.36 €

Rubber Ring with 8,0 mmø section, 50mm outer diameter and 85mm inner diameter.This ring is used in OMS wing equipment to keep the D-Rings of the pockets in a 90º position. It is also used in harnesses to stop different elements that we have mounted.

En Stock

Available

Spare parts

Scuba Force inflator - safety valve 1,4 (OPV)

SFOPV

12.40 €

DTD, inflator - safety valve 1,4 (OPV)

Fuera de Stock

Ask us about availability

inicio

Scubapro 36cm (14") corrugated hose

01.030.115

7.36 €

Corrugated hose for Jackets and/or wings with oversized terminals, at the top to adapt to the elbow and accommodate a wide reusable flange and at the bottom to give us more grip and also accommodate a wide reusable flange. Inner diameter on both sides 21mm smooth

En Stock

Available

inicio

Scubapro 36cm (14") corrugated Oval hose

22.247.106

24.00 €

Inner diameter on both sides 24mm smooth

En Stock

Available

inicio

Scubapro 41cm (16") corrugated hose

01.030.114

18.93 €

Inner diameter both sides 21mm smooth

En Stock

Available

inicio

Scubapro 41cm corrugated hose

01.030.121

6.53 €

Fuera de Stock

Ask us about availability

inicio

Scubapro 45cm corrugated hose

821.096.000

18.18 €

Trachea with lateral protrusions for hose routing 20mm molded interior for elbow and inflator control adjustment

En Stock

-20%

Available

Spare Parts & Accessories

Scubapro AIR 2 to BPI adapter

21.080.626

33.72 € 42.15 €

Fuera de Stock

-20%

Ask us about availability

Spare Parts & Accessories

Scubapro BPI (post. 2013)

21.610.002

65.46 € 81.82 €

The Balanced Power Inﬂator has a streamlined and ergonomic design. The inﬂation button is easy to locate and requires little effort. A soft mouthpiece has been added. Without hose/inflatorhose

En Stock

-20%

Available

Spare Parts & Accessories

Scubapro BPI (pre. 2013)

21.622.001

59.50 € 74.38 €

The Balanced Power Inﬂator has a streamlined and ergonomic design. The inﬂation button is easy to locate and requires little effort. A soft mouthpiece has been added. Without hose/inflatorhose

Fuera de Stock

Ask us about availability

Spare Parts & Accessories

Scubapro BPI Quick Connect

21.626.013

23.14 €

En Stock

Available

Spare Parts & Accessories

Scubapro Elbow and OPV for jackets

2.80 €

Replacement elbows and OPV-drain valves for Scubapro jackets. Spare parts are common for almost all jacket models, with only a few exceptions. If you have any questions about compatibility with your model, please contact us before placing your order. Choose the necessary spare part from the drop-down menu according to the numbering in the diagram. Part...

En Stock

Available

inicio

Scubapro Elbow without cable

21.200.017

13.22 €

En Stock

Available

Spare Parts & Accessories

Scubapro jacket OPV ASSY

21.200.003

24.79 €

En Stock

-20%

Available

Scubapro wings spare parts

Scubapro S-Tek Balanced Power Inflator (BPI)

21.615.000

65.46 € 81.82 €

Designed by the SCUBAPRO development team for technical diving equipment, the Tek-BPI only resembles the rest of the inflator controls in its K-type external appearance. Both externally and, above all, internally, it is much more robust and has also been designed to carry out periodic inspections with the specific kit available. The Scubapro Tek-BPI...

En Stock

-20%

Available

Spare Parts & Accessories

Scubapro Supercinch Tank Strap

20.135.005

42.98 € 53.72 €

En Stock

Available

Spare parts

Seal Ring

A11918019

4.45 €

Sel Ring for OMS wing manufactured before 2015. Also fits in: Halcyon, IST, Hollis, Dive Rite, etc... if you have any doubt regarding the adaptability, please, contact us. Outer diameter: 46,7mm *NOTE: compatibility refers exclusively to the thread pitch

En Stock

Available

Spare parts

Service Kit for X01 end Inflator

DTD 3414

30.00 €

Box with 10 services for the X01 end inflator used in DTD, Scuba Force wings and in some other brands such as DIR Zone, AGIR, some Mares wings....

Fuera de Stock

Out-of-Stock

Spare parts

Sitech String Dump Valve

13350WN

31.84 €

Spring loaded Dump Valve with twin check valves and cord. Intended for use in inflatable units such as rebreathers, lift bags, BCD´s etc. Double check valves reduce water intrusion to a minimum. A moving pressure plate prevents the check valve from tacking to the spring retainer when dumping manually.This Dump Valve is designed to be fitted in a Weld nut.

View

En Stock

Available

Spare parts

Slide Tri Glide

SFSTG

4.13 €

Slide tri glide for 50mm webbing.It can be use for different applies, one of them and the most demanding is mounting it on the back of the back plate, making the cinch able to run over it and making the harness infinitely adjustable.

En Stock

Available

STEEL HARDWARE

Stainless Steel Eyelet 10mmø

8473

1.12 €

10mmø Stainless steel eyelet with for riveting.

Fuera de Stock

Ask us about availability

Spare parts

Tank band with S.S cam buckle

30046

24.15 €

Fuera de Stock

Ask us about availability

Spare parts

Xdeep End Power Inflator

sp-002-0

24.79 €

K-type inflator, balanced piston type inflator, which enables precise adding of the gas to the buoyancy compensator. The body of the inflator is made of POM-H poliacetal of very high mechanical durability and 100% resistance to salt water. The seat of the valve is made of metal and therefore the inflator is definitely more resistant to freezing than...

Fuera de Stock

Ask us about availability

Accessories/extras

Xdeep Inner bladder replacement

65.29 €

Replacement inner bladder for Xdeep wings. Choose the appropriate option for your wing model by selecting it from the drop-down menu, following the relationship in the list below: Item #1: Project Item #2: ZEN Item #3: ZEOS 28 Item #4: ZEOS 38 Item #5: Hydros 40 Item #6: Hydros 50 Item #7: Stealth 2.0 Classic Item #8: Stealth 2.0 TEC Item #9: Stealth 2.0...

En Stock

Available

Spare parts

Xdeep Stainless Steel weight belt buckle

HA-013-0

8.26 €

Showing 1-107 of 107 item(s)