JJ-CCR

En Stock

inicio

Breathing hoses ballast (pair) (pre owned)

49.58 €

Weight rings for JJ-CCR breathing hoses. The rings are made of stainless steel and have exceptional finishes, which also fit perfectly into the JJ-CCR breathimngs hoses Specs:: Weigh 300gr/unit Inner: 36mm Outer: 56mm Width: 25mm NOTE: this product is used. It presents slight signs of wear that in some areas reveal the interior brass, nothing that could...

Fuera de Stock

Ask us about availability

BOVs

Divesoft BOV for...

900.52 € 968.30 €

Description Divesoft BOV for use with any rebreather listed at the dropdown menuSupplied together with two clamping rings. CE approved to EN250:2014

En Stock

Available

Meg

Dust Cap Set 9/16" (male & female)

DS-2

41.73 €

Female and male metal Dust Cap for the 9/16 "regulator hose connections Ideal for protecting the hose terminal, rebreather head inlet, BOV, etc ...

Fuera de Stock

Out-of-Stock

Meg

Dust Caps 9/16"

NAN0003

23.97 €

These dust caps are made to fit any standard 2nd stage hose and reg fitting.One use is to cap the oxygen solenoid and hose of your rebreather or cap the ends of the ADV hoseIt fits the kiss BOV, or can be used simply to protect and keep hoses clean.ALSO FITS ANY STANDARD 9/16 REGULATOR FITTINGThey come as a set 1 male and 1 female (one for the hose and...

View

En Stock

Available

BATTERIES

Energizer Litium 9v Battery

BAT-6F22/EG

21.00 €

Non-rechargeable 9V lithium battery. Ideal for replacing traditional batteries found in rEvo, JJ, and Megalodon Classic (an adapter is required for this), greatly extending battery life.

Fuera de Stock

On demand

Wings

Halcyon Evolve JJ rebreather wing

519.00 €

The Evolve JJ Wing is precision-engineered for JJ-CCR rebreather divers seeking the performance and reliability of a true twin-cylinder wing. With 19 kg/42 lbs of lift and a streamlined design, it's built for demanding exploration dives. The Evolve JJ Rebreather Wing features a proven, circular bladder system that offers excellent stability and trim....

En Stock

Available

JJ-CCR

J-CCR Over pressure valve for 1st stage (17bar)

2010200038

29.00 €

Overpressure valve preset at 17Bar, indicated for the 1st stage of Diluent Adjustable from 10 to 20 bar

Fuera de Stock

Ask us about availability

DECO ESSENTIALS

JJ CCR Bailout Clamps (pair)

62100101

19.00 €

Stainless steel cylinder clamps with webbing to prevent scratches and abrasions. Used to secure the diluent cylinders, typically 7 liter or similar, in a GUE configured JJ CCR. Four would normally be required per unit.

En Stock

Available

JJ-CCR

JJ-CCR 3-Way Manifold

4100-30

53.72 €

3-way manifold with 9/16" male connection (to connect a standard regulator hose) and three 3/8" female connections (for standard regulator hose connection)

Fuera de Stock

Ask us about availability

JJ-CCR

JJ-CCR ADV complete

2016000000

220.00 €

Complete Inhale T with integrated ADV, etc...

En Stock

Available

JJ-CCR

JJ-CCR ADV Cover

3016080013

12.00 €

En Stock

Available

JJ-CCR

JJ-CCR ADV diaphragm

2050-10

32.73 €

ADV diaphragm spare part (JJ-CCR Rebreather)

En Stock

Available

JJ-CCR

JJ-CCR ADV Lever

2300-42

4.50 €

En Stock

Available

JJ-CCR

JJ-CCR ADV PIN

2300-44

2.47 €

En Stock

Available

JJ-CCR

JJ-CCR ADV Push Pin

2300-48

12.00 €

En Stock

Available

JJ-CCR

JJ-CCR ADV spring

2300-45

9.20 €

Fuera de Stock

Ask us about availability

JJ-CCR

JJ-CCR ASM Handle For Canister

2006100010

120.00 €

Fuera de Stock

Ask us about availability

JJ-CCR

JJ-CCR ASM Stand

2006100008

187.00 €

Fuera de Stock

On Demand

JJ-CCR

JJ-CCR Axial Scrubber

3060-00

276.00 €

Axial scrubber for JJ-CCR rebreather Capacity 2,3kg Autonomy 168´

En Stock

Available 24-48h

JJ-CCR

JJ-CCR backlit bolt spacer + bolt set

4100-42

21.00 €

En Stock

JJ-CCR

JJ-CCR breathing hose protectors

2300-10

29.99 €

JJ-CCR breathing hose protectors (pair)

Fuera de Stock

Ask us about availability

JJ-CCR

JJ-CCR canister bottom plate

3006080002

164.46 €

O-Rings NOT included

Fuera de Stock

Ask us about availability

JJ-CCR

JJ-CCR Complete exhale T

201600000010001

89.00 €

Complete Inhale T with integrated ADV, etc...

En Stock

Available

JJ-CCR

JJ-CCR Counter Lung inner bag

37.50 €

JJ-CCR rebreather counter lung inner bladders Choose the required one, inhalation or exhalation, from the drop-down menu

Fuera de Stock

Ask us about availability

JJ-CCR

JJ-CCR Counter lungs Complete Set

2007220040

695.00 €

Set with all the parts included, inner bladders, outer bag, OPV, Ts...

En Stock

JJ-CCR

JJ-CCR Divecan HUD Protector

DCHP

67.00 €

Divecan HUD Protector - Fits multiple Units inc. JJ-CCR, Hollis Prism, Optima

En Stock

Available

JJ-CCR

JJ-CCR DSV lever

3100-10

12.00 €

En Stock

Available

JJ-CCR

JJ-CCR DSV O-ring kit

2000-20

22.00 €

En Stock

Available

JJ-CCR

JJ-CCR Flapper valves for DSV or BOV

3018280004

30.00 €

Both mushrooms valves are included

En Stock

ADAPTERS

JJ-CCR Flow Stop

3000-10

64.00 €

En Stock

Available

JJ-CCR

JJ-CCR Heavy duty cam band

3400-00

26.25 €

En Stock

Available

JJ-CCR

JJ-CCR HUD

2200-10

247.11 €

HUD for rebreather JJ-CCR model DiveCan New HUD model for the JJ-CCR JJ's HUD now comes mounted on a holder to avoid pressure on it every time we mount and dismount it from the HUD DSV holder. In this way, what we will mount, consequently what we will put pressure on, will be on the support on which it is already mounted. In this way the life of the...

En Stock

Available

JJ-CCR

JJ-CCR HUD Holder

3002080000

10.00 €

HUD Holder to avoid having to mount and remove the HUD from the DSV's fixed holder. This new holder, included with all new HUDs, anchors itself to the DSV's fixed holder. This way, we avoid clipping and unclipping the HUD itself, thus extending its useful life due to the delicate nature of the transparent part. The part that clips and unclips is the new...

Fuera de Stock

Ask us about availability

JJ-CCR

JJ-CCR Lock Block for Stand (pair)

200608000710001

24.79 €

En Stock

Available

JJ-CCR

JJ-CCR Lockring for breathing hose

2300-05

2.50 €

En Stock

Available

JJ-CCR

JJ-CCR Lockwasher for breathing hose

3018080033

4.00 €

En Stock

Available

JJ-CCR

JJ-CCR Loop hose

2300-00

30.17 €

JJ-CCR Loop hose 1m long

Fuera de Stock

Ask us about availability

JJ-CCR

JJ-CCR Loop Weight

3100-04

31.50 €

En Stock

Available

MAVs, Flowstops, fittings, blocks...

JJ-CCR MAV

2026000000

185.00 €

The JJ-CCR Manual Addiction Valve has a 360º rotatory attached system which allow you easily to remove the on-board gas inlet and attached the off-board one in case of to be needed.

En Stock

Available

JJ-CCR

JJ-CCR MAV O-ring kit

2000-15

12.00 €

Complete kit for the JJ-CCR MAV maintenance.

En Stock

Available

JJ-CCR

JJ-CCR MAV spring

2026100009

9.00 €

En Stock

Available

JJ-CCR

JJ-CCR Membrane for dump valve

4100-01

1.00 €

En Stock

Available

JJ-CCR

JJ-CCR Mouthpiece for BOV or DSV

2050-20

15.70 €

En Stock

JJ-CCR

JJ-CCR Nut ADV Side

3100-06

30.00 €

En Stock

JJ-CCR

JJ-CCR Nut Tee Side

3100-02

30.00 €

En Stock

Available

JJ-CCR

JJ-CCR Over pressure valve for 1st stage (10bar)

2010200003

29.00 €

Overpressure valve preset at 10Bar, indicated for the 1st stage of Oxygen Adjustable from 0 to 10 bar

Fuera de Stock

On Demand

JJ-CCR

JJ-CCR Radial Scrubber

3050-00

479.34 €

Radial scrubber for JJ-CCR rebreather This scrubber directly replaces the standard one supplied with the unit, without the need for additional couplings. The use of a Radial scrubber gives us several advantages, two of them stand out: More absorbent capacity (3kg), which offers us a longer "official" autonomy (230´) Its peculiar design offers us a best...

Fuera de Stock

Ask us about availability

JJ-CCR

JJ-CCR RBSM - Rebreather Safety Mouthpiece

301820011110001

132.00 €

The new design RBSM offers great security and comfort. The head-strap holds the mouthpiece firmly in position allowing for a very relaxed grip on the bite and significantly reducing jaw fatigue on longer dives. The crucial safety benefit is that the RBSM greatly increases the likelihood that the diver will remain on the loop in the event of going...

En Stock

Available

inicio

JJ-CCR Red silicone O-Ring

2000-22

7.00 €

Silicone O-Ring. It is the one that is mounted on the breathing hose (we usually use it to hold the HUD cable), very useful to always carry it mounted as it serves as an emergency replacement for the base of the Ts.

En Stock

Available

inicio

JJ-CCR Screw for T Lung holding

4100-04

2.00 €

Spare part of the screw used for fixing the T (3 are used) to the base.

En Stock

Available

JJ-CCR

JJ-CCR Scrimnet filter kit Radial

2100-10

12.00 €

Scrimnet filter kit. 1 unit to use in Radial scrubber

En Stock

Available

JJ-CCR

JJ-CCR Scrubber bottom Axial

3060-01

48.76 €

Fuera de Stock

Ask us about availability

JJ-CCR

JJ-CCR Scrubber bottom Radial

3055-00

48.76 €

En Stock

Available

JJ-CCR

JJ-CCR Scrubber nut

2100-20

14.80 €

En Stock

Available

JJ-CCR

JJ-CCR Sensor Cover

2000-60

86.50 €

A travel protection cover is now available from JJ-CCR. This cover will provide the inside of the JJ-head with sturdy protection for; the oxygen solenoid, sensors and threads.

Fuera de Stock

on demand

JJ-CCR

JJ-CCR Shearwater Petrel-3 controller

SH2000-40

1,652.07 €

En Stock

Available

JJ-CCR

JJ-CCR Tool for ADV

2016100000

15.00 €

En Stock

JJ-CCR

JJ-CCR Tool for Tee-ADV Fitting

4100-20

27.75 €

Tool to disassemble the bases of Ts of the rebreather JJ-CCR. Necessary to be able to adequately replace/manage the counter lungs

Fuera de Stock

Ask us about availability

JJ-CCR

JJ-CCR Wing

2012000000

387.00 €

Fuera de Stock

Ask us about availability

JJ-CCR

JJ-CCR wing inner bladder

2300-25

78.00 €

Fuera de Stock

Ask us about availability

JJ-CCR

JJ-CCR XRC Set (X-tended range canister & radial scrubber)

2006020001-XRC

1,649.00 €

The X-tended Range Canister provides the experienced diver with a total runtime of nearly 6 hours. The canister is extended in length by 50mm and the stand is shortened with 50 mm so the overall length of the unit stays the same! The canister comes complete with stand, handle and radial scrubber. All other parts from the original rebreather will fit...

Fuera de Stock

Ask us about availability

JJ-CCR units

JJ-Head Complete (No Sensors)

2000-30

3,304.96 €

View

En Stock

Available

JJ-CCR

Nautec service kit Air / Nitrox

2098220002

37.00 €

Service kit for Nautec® valves used on JJ-CCR and rEvo rebreathers, suitable for Diluent and Oxygen

Fuera de Stock

Ask us about availability

inicio

Pair of breathing hose protectors

jdive0031

34.50 €

Pair of breathing hoses protectors. The sections are open with Velcro closure, to facilitate the assembly and disassembly operation. The measurements of each section are 50cm x 20cm

En Stock

Available

JJ-CCR

Rebreather o-ring kit

2000-00

42.00 €

En Stock

Available

JJ-CCR

Scrimnet filter kit

2100-00

10.60 €

Scrimnet filter kit

Fuera de Stock

Ask us about availability

Shearwater

Shearwater Petrel 3 Dive-Can

SH11320

1,404.13 €

The Shearwater Petrel 3 unit with Dive-Can AK 4Pin connection is ideal for connecting to our rebreathers as a PpO2 reader and redundant Deco controller. More and more rebreather manufacturers are resorting to the Dive-Can type connection for the installation of both the main controller and the HUD. It is in this second connection where we can mount the...

Showing 1-67 of 67 item(s)