OMS

Complete Gear

Wings

Backplates and harness...

Accessories, pockets, etc...

Ballast, STA, weight pockets...

Hardware things...

Spare parts

En Stock

-15%

Available

OMS

OMS® Aluminium backplate

A11518032

90.62 € 106.61 €

En Stock

Available

Spare parts

OMS® Complete Over Pressure valve

a11918026

12.07 €

Complete overpressure valve (except the male part inside the bladder, not included) for OMS® wings manufactured before 2015.This valve is the universal type one, are also valid / suitable for and are suitable for a multitude of brands such as Halcyon, EDGE, Dive Rite, Xdeep, etc ... get in touch with us is you could have any doubt about compatibility....

En Stock

Available

Spare parts

OPV retainer

A11918028

0.83 €

Over pressure seat retainer to use with OMS wings manufactured before 2015. It also works with many other different wings brands, like: Halcyon, Dive Rite, IST, Hollis, HOG, EDGE, etc..

En Stock

Available

Spare parts

OPV Seat

A11918027

1.24 €

The OMS O-Ring (to use with OMS wings manufactured before 2015) is for use in the over pressure valve of the wings, however, its also works with these other brands: Halcyon, Dive Rite, IST, Xdeep, Hollis, EDGE, HOG...

En Stock

Available

Spare parts

OPV valves spring type 1

A11918029

0.50 €

This is the spring which is located at the over pressure valves and elbow of the wings This spring has the same diameter at both sides, up and down, 24mm

En Stock

-15%

Harness & Backplates

Quick Adjust assembling

42.85 € 50.41 €

Turn your continuous strap harness into a harness, with a continuous strap but now, adjustable For a perfect operation of the system, it is recommended that the main strap of the harness, not be excessively rigid. Ask us about it Available in two options, stainless steel or aluminum

En Stock

Available

Spare parts

Rubber band for harness cinch

SFWEBBUN

2.40 €

Bungee band for use in the harness, either to hold the backup flashlight, or the remaining strap.Much more comfortable and easy to handle than the classic rubber bands ATTENTION: The price is for one (1) rubber band. The photo shows 6 units for illustrative purposes.

En Stock

Available

Spare parts

Rubber O-ring to fix the inflator hose

A11918012

4.13 €

Rubber O-ring to fix the inflator on left chest D-ring

En Stock

Available

Spare parts

Rubber ring for harness and D-Ring

A11918092

3.31 €

Rubber Ring with 8,0 mmø section, 50mm outer diameter and 85mm inner diameter.This ring is used in OMS wing equipment to keep the D-Rings of the pockets in a 90º position. It is also used in harnesses to stop different elements that we have mounted.

En Stock

Available

Spare parts

Seal Ring

A11918019

4.38 €

Sel Ring for OMS wing manufactured before 2015. Also fits in: Halcyon, IST, Hollis, Dive Rite, etc... if you have any doubt regarding the adaptability, please, contact us. Outer diameter: 46,7mm *NOTE: compatibility refers exclusively to the thread pitch

Fuera de Stock

-12%

Ask us about availability

COMPLEMENTS

V-weight Coated

28.36 € 32.23 €

V-weight coated with resin to prevent the inevitable wear of the lead piece from contaminating the environment. The resin cover is hard and highly resistant, it is completely attached to the lead piece, thus avoiding premature wear and breakage. These V-weight leads are designed to be mounted on twin tanksright between the backplate and the tanks,...

En Stock

-15%

Available

Accessories, pockets, etc...

Vertical OMS Ballast System

A11918096

32.32 € 38.02 €

The OMS Ballast System pocket (vertical orientation) with a quick release buckle capable of holding up to (6 lbs | 2.7 kg) each. NOTE: the price is for 1 unit

Showing 73-84 of 119 item(s)