Valves and cables...

En Stock

Available

Chargers, batteries and cables

E/O Cord 120cm

SFEOC

83.19 €

E/O wet-type cable, approximately 120 cm long

En Stock

Chargers, batteries and cables

E/O Cord Plug

SFEOCP

21.01 €

Protective cap for all E / O cord connections.

En Stock

Available

Chargers, batteries and cables

E/O Cord Plug

SFEOCPSMALL

21.01 €

Protective cap for all E / O cord connections.

En Stock

Available

Valves and cables...

Scuba Force X-Heat connector

337939

10.00 €

Waterproof male/female connector for Scuba Force X-Heat heating systems

Fuera de Stock

Ask us about availability

Valves and cables...

Ammonite T-Valve

322.00 €

Drysuit inflation valve with cable gland to feed your heating systems. Available for both Apeks and Si Tech valve seats Item nº1: For Apeks valve seats measurements Item nº2: For Si Tech valve seats measurements

Fuera de Stock

Ask us about availability

Valves and cables...

Big Blue Heat Controller

Eoheatcontroller-I

123.14 €

Technical divers using heated vests or gloves often face the challenge of fixed power output. Once set, the device delivers the same power throughout the dive, regardless of changing water temperature conditions. What feels comfortable at 70 meters can quickly become too hot during decompression stops. To address this, Big Blue developed the EO Heat...

Fuera de Stock

Ask us about availability

Valves and cables...

Big Blue Heat Controller "Y"

Eoheatcontroller-Y

161.16 €

Fuera de Stock

Ask us about availability

Valves and cables...

Regulator 12 V

GRAL-REG12V

335.47 €

Reduces voltage from 14,4 V to 12 V Has three power levels 100% / 65% / 35% Individually customized cable length (min 10 cm, max 100 m each side) One end with GRALmarine plug, second end e/o cord Perfect to use standard 12 V heating or lighting systems with 14,4 V GRALmarine batteries The regulator does not work with systems under 18w The...

Fuera de Stock

Ask us about availability

Valves and cables...

SANTI "Y" Connector

SA6035

61.98 €

SANTI “Y” connector consists of three waterproof two pole connectors in a single device that allows for power split from one source to two separate devices. The “Y” connector can be used for all type of underwater electrical devices, like heating or lightning systems with E/O cords connectors. The Y connector is compatible with all types of E/O cords...

Fuera de Stock

Ask us about availability

Valves and cables...

Santi Double Drysuit connector

214.88 €

Part of the complex heating system consisting of at least an undersuit, SANTI Thermovalve or SANTI Connector and an external battery. This configuration allows a diver to wear the undersuit under the drysuit without angers associated with internal batteries. Spec details Inlet valve connector with 12V battery integration function Inlet valve connector is...

Fuera de Stock

Ask us about availability

Valves and cables...

Santi Drysuit connector

161.16 €

Fuera de Stock

Ask us about availability

Valves and cables...

SANTI E/O Cord Dummy Plug

SA6012

19.83 €

The E/O blanking plug protects the unconnected E/O cable from dirt, corrosion, and damage. Ideal for those with heated vests or spare batteries. E/O cables are delicate, and any contaminants, such as grit or suspended particles, inside the connector will prevent proper connection and could permanently damage the cable end. A must-have if you're carrying...

Fuera de Stock

Ask us about availability

Valves and cables...

SANTI E/O Cord Surface Cable

SA6042

35.54 €

Do you want to use your heating system on the surface? With this cable, you can connect your battery directly to your heating system without having to wear a dry suit. It's ideal for those times when we operate in very cold environments, allowing us to take advantage of our heating system while we work on preparing for the operation, or whatever we deem...

Fuera de Stock

Ask us about availability

Valves and cables...

SANTI Exchangable E/O cable for Blue Power Batteries

165.29 €

Santi Blue Power battery cables are available in 35 cm, 60 cm, and 100 cm lengths. They are very easy to replace, and the kit includes the necessary tool to remove the original cable and safely install the replacement.

Fuera de Stock

Ask us about availability

Valves and cables...

Santi Heated Gloves Cable

SA6011

26.45 €

The Santi Heated Glove Cable is a spare cable, required or replacement for connecting the Santi Heated Gloves to the Santi Drysuit Connector or 303 Thermovalve.

Fuera de Stock

Ask us about availability

Valves and cables...

Santi Heated Gloves Y Splitter

SA6010

26.45 €

The Santi heated glove Y-splitter allows you to connect the gloves and the Santi heated vest or suit for simultaneous use without the need for a double cable input.

Fuera de Stock

Ask us about availability

Valves and cables...

Santi Thermovalve 303

268.60 €

Designed as part of complex SANTI Heating System which consists of such items as heated undersuit or heated vest, SANTI Thermovalve or SANTI Connector and external battery. This configuration allows a diver to use the heating system without any dangers of using the internal battery. Spec details Weight: 200 grams Drysuit inflation valve with integrated...

Fuera de Stock

Ask us about availability

Valves and cables...

Scuba Force Inflation valve Port for Apeks

SFXHD

158.82 €

Scuba Force X-Heat heating system has a POM tightening grommet with E/O Cord 18/2 SVO. It’s compatible with standard batteries and has kink & IP68 protection.

Fuera de Stock

Ask us about availability

Valves and cables...

Scuba Force inflation valve with E/O and X-Heat connections

SI905507

209.24 €

The Vega inlet valve is a versatile solution for cold water diving, with two rotating ports, an accessible inflator button, and a standard E/O cord on the outside and a connector for the X-Heat system on the inside.

Showing 1-19 of 19 item(s)