DIVE GEAR

LIGHTING

Photo and Video

JACKETS

REGULATORS

BACKPLATES/WINGS

SUITS

Sidemount/Caving

Adjustable Fins

Foot Pocket Fins

MASK

COMPUTERS

REGULATOR HOSE (Rubber & Miflex)

CONTROL INSTRUMENTS

STEEL HARDWARE

DECO ESSENTIALS

REELS, WETNOTES, BUOYS...

Knifes & Cutters

BUNGEE MOUNTS/COMPASS

Sealing systems

DRYSUIT INFLATOR SYSTEMS

TANKS/VALVES

pee-valve, condoms, quick connec

Gas fills, analysis & decanting

ANALYZERS

ADAPTERS

Transport bags

Hygiene and Care

Weight

Tools

Face Mask

Miscellaneous

Compressors

Pre Owned

Scooters

Outlet

Lifting Balloons

En Stock

available

SPARE PARTS & EXTRAS

Sparepart Set (for all valves and manifolds)

A16310640

21.49 €

Complete Kit to carry out the revision and tuning of the BtS, Scubapro and many other valves and manifolds. Ask us for any questions about compatibility with your valve type. NOTE: the O-ring can be green or black, in both cases compatible with O2 using specific grease.

En Stock

Available

STEEL HARDWARE

stainless-steel belt buckle

A21910601

7.44 €

Fuera de Stock

Ask us about availability

COMPLEMENTS

Tank Boot

10.74 €

Tank Boot, available in three sizes: Item nº 1: for 140mm tanks (5, 7 and 8.5 liters) Item nº 2: for 171mm tanks (8, 10 and 12 liters long) Item nº 3: for 204mm tanks (12 liter short, 15, 18 and 20 liters) Choose the appropriate one from the dropdown menu NOTE: The tank boot may vary slightly from the picture, this is shown for illustrative purposes only.

En Stock

-10%

Available

valves

Twin tank valves with isolation 232Bar

168.84 € 187.60 €

Oxygen Clean G5/8" 232Bar twin tank valves with isolation. Available for: 5 and 7 liters (140mm) 7liters wide and 8, 10, 12liters long (171mm) 12, 15, 18 and 20 liters (204mm) 11,1 liters aluminium, S080 (186mm)

Fuera de Stock

-12%

Ask us about availability

COMPLEMENTS

V-weight Coated

28.36 € 32.23 €

V-weight coated with resin to prevent the inevitable wear of the lead piece from contaminating the environment. The resin cover is hard and highly resistant, it is completely attached to the lead piece, thus avoiding premature wear and breakage. These V-weight leads are designed to be mounted on twin tanksright between the backplate and the tanks,...

En Stock

Available

SPARE PARTS & EXTRAS

Valve knob short

A16310623-short

6.60 €

39mm long knob, slightly shorter than standard ones

Fuera de Stock

Ask us about availability

DRYSUIT INFLATOR SYSTEMS

1st stage with 4 LP connections

A13110601

115.70 €

Unbalanced 1st Stage, DIN, 300 bar; G5/8" thread, 300 bar, 1 HP port and 4 LP ports

Fuera de Stock

Ask us about availability

TWIN TANKS

8,5 twin tanks concave base

748.76 €

Fuera de Stock

Ask us about availability

TWIN TANKS

Black Edition 2x12 concave twin tanks

S16716661

779.34 €

The range of steel cylinders is produced by Eurocylinders System AG (ECS).ECS is one of the biggest and most efficient manufacturers of high pressure steel cylinders in Europe with an annual output of more than 500,000 cylinders.

Fuera de Stock

Ask us about availability

Swimming Neoprene Accessories

Buddyswim Capucha Neopreno Trilaminate Warmth 2.5mm

37.93 €

Specifically designed for open water swimming, it is very suitable for use in Scuba diving in temperate to warm waters. The Buddyswim neoprene swim hood is designed to keep your head and neck warm during open water swim sessions. Made with 2.5mm Trilaminate Warmth, a three-layer neoprene composition developed by Buddyswim to offer optimal protection and...

Fuera de Stock

Ask us about availability

Swimming Neoprene Accessories

Buddyswim Capucha Neopreno Trilaminate Warmth 2.5mm Orange

37.93 €

Fuera de Stock

Ask us about availability

Swimming Neoprene Accessories

Buddyswim Chaleco Neopreno Trilaminate Warmth 1.5mm

54.46 €

The Buddyswim Neoprene Swim Vest is designed to keep your body warm during open water sessions. Made with 1.5mm Trilaminate Warmth, an exclusive three-layer neoprene composition developed by Buddyswim to offer optimal protection and flexibility. Designed to go under the wetsuit and provide maximum upper body thermal protection in colder water swimming...

Fuera de Stock

Ask us about availability

Neoprene Socks

Buddyswim Neoprene Socks Trilaminate Warmth 2.5mm

30.50 €

NEOPRENE SOCKS FOR OPEN WATER SWIMMING The Buddyswim neoprene swim socks are designed to keep your feet warm during open water sessions. Made with 2.5mm Trilaminate Warmth, an exclusive three-layer neoprene composition developed by Buddyswim to offer optimal protection and flexibility. The heat-sealed and vulcanized seams together with the SRC System...

Fuera de Stock

Ask us about availability

inicio

Buddyswim Neoprene Trilaminate Warmth 2.5mm Gloves

32.15 €

Buddyswimm gloves are suitable for both swimming and diving. Designed to keep your hands warm during cold water open water swimming sessions and during our warm water dives. Made with 2.5mm Trilaminate Warmth, an exclusive three-layer neoprene composition developed by Buddyswim to offer optimal protection and flexibility. The heat-sealed and vulcanized...

Fuera de Stock

On demand

DRYSUIT INFLATOR SYSTEMS

Complete drysuit inflation system W21,8

233.88 €

COMPLETE DRY SUIT INFLATION SYSTEMS, ALU OR STEEL CYLINDERS - 0,85 TO 3 LITRES. Drysuit Inflation Systems developed by BtS consisting of a Cylinder (aluminium or steel), Cylinder Valve (W21,8 inert gas), First Stage, and Cylinder Mounting Straps.

En Stock

Available

valves

Comptec Valves

64.46 €

Comptec type valves 5 different valves for the different models of dry suit inflation system tanks. Inert Gas valve for tanks with M18/1.5 neck Inert Gas valve for tanks with M25x2 neck 5/8 GAS valve (DIN 232Bar) for tanks with M18/1.5 neck and M25x2 neck 5/8 GAS valve (DIN 232Bar) for tanks with M25x2 neck 5/8 GAS valve (DIN 300Bar) for tanks with...

Fuera de Stock

Ask us about availability

CONTROL INSTRUMENTS

Cylinder pressure testing gauge, DIN, up to 300 bar

A16910604

78.51 €

Surface pressure gauge for checking tnaks pressure. Able up to 400Bar, connection DIN 300Bar

Fuera de Stock

DIN Valve RIGHT expandable US NPSM 3/4 "

Ask us about availability

valves

DIN Valve RIGHT expandable US NPSM 3/4 "

A16310631

64.46 €

Regulator connection: 232Bar DIN Neck connection: US NPSM 3/4" GAS Orientation: Right Blind Plug not included. Do you need the blind plug? click here

Fuera de Stock

Ask us about availability

ADAPTERS

G 5/8" 230 bar Female to INT

A13910601

41.32 €

Adapter DIN to INT. Ideal to use the regulator with DIN system in bottles with non-removable fixed INT

Fuera de Stock

Ask us about availability

SPARE PARTS & EXTRAS

Green Rubber knob

A16310623-green

6.60 €

Fuera de Stock

Ask us about availability

valves

Mono valve M26

A16817601

57.02 €

M26 valve Valve for Nitrox tanks with flat seat and M25 tank connection (standar)

Fuera de Stock

Ask us about availability

valves

Mono Valve US 3/4" GAS NPSM

A16310632

61.98 €

Single output Valve non-expandable 232Bar US 3/4" GAS NPSM G/58

Fuera de Stock

Ask us about availability

NORDIC BLUE

Nordic Blue full Set

S20916801-

153.72 €

Complete Nordic Blue system, consisting of rings to install in the dry suit, latex sleeves for use without gloves, outer gloves, inner gloves and O-rings.

Fuera de Stock

Ask us about availability

NORDIC BLUE

QUALLOFIL® inner-lining for dry gloves

47.11 €

Inner glove for dry glove system. They have an excellent relationship between thermal protection and thickness. Excellent option to keep our hands warm without having to wear an excessive thickness.

Showing 49-72 of 117 item(s)

Product added to wishlist