DIVE GEAR

LIGHTING

Photo and Video

JACKETS

REGULATORS

BACKPLATES/WINGS

SUITS

Sidemount/Caving

Adjustable Fins

Foot Pocket Fins

MASK

COMPUTERS

REGULATOR HOSE (Rubber & Miflex)

CONTROL INSTRUMENTS

STEEL HARDWARE

DECO ESSENTIALS

REELS, WETNOTES, BUOYS...

Knifes & Cutters

BUNGEE MOUNTS/COMPASS

Sealing systems

DRYSUIT INFLATOR SYSTEMS

TANKS/VALVES

pee-valve, condoms, quick connec

Gas fills, analysis & decanting

ANALYZERS

ADAPTERS

Transport bags

Hygiene and Care

Weight

Tools

Face Mask

Miscellaneous

Compressors

Pre Owned

Scooters

Outlet

Lifting Balloons

Fuera de Stock

Ask us about availability

Lola Valves

Lola Manifold T-SP 200Bar

Valve connector T-SP-200Bar

147.04 €

Connection DIN G5/8" 230Bar direct to valve The manifold does not have an insulating valve because you already have one in each side valve, in this way we are able to isolate and eliminate even more failures, such as those of the manifold O-Rings. It is also more robust than conventional manifols. Even more, this manifold allows the twins to be assembled...

Fuera de Stock

Ask us about availability

COMPLEMENTS

Lola Nut M8 for Backplate

MZD-B

11.57 €

Knurled nut M8 to tighten the backplate without using tightening tools. Price per piece. NOTE: the photo shows both sides of the piece for illustrative purposes, the price is ONLY FOR ONE PIECE

Fuera de Stock

on demand

Lola Valves

Lola T-SVO 200 BD Nitrox left valve 3/4"

T-SVO 200 BD NITROX-L

214.75 €

Really robust valve with a design studied to facilitate handling in any environment, no matter how narrow or difficult, significantly increasing the user's speed of action and consequently general safety. It has two outlets, each activated by its own shut-off valve, in this way double outlets can be mounted on single cylinders, twin sets, supports for...

Fuera de Stock

on demand

Lola Valves

Lola T-SVO 200 BD Nitrox right valve 3/4"

T-SVO 200 BD NITROX-R

214.75 €

Fuera de Stock

Ask us about availability

Lola Valves

Lola T-SVO 200 Nitrox left valve

T-SVO 200 NITROX-L

179.00 €

Fuera de Stock

Ask us about availability

Lola Valves

Lola T-SVO 200 Nitrox right valve

T-SVO 200 NITROX-R

179.00 €

Fuera de Stock

on demand

Lola Valves

Lola T-SVO 300 BD Air Nitrox valve 3/4"

T-SVO 300 BD NITROX-L

214.75 €

Fuera de Stock

on demand

Lola Valves

Lola T-SVO 300 BD Nitrox right valve 3/4"

T-SVO 300 BD NITROX-R

214.75 €

Fuera de Stock

Ask us about availability

Lola Valves

Lola T-SVO 300 Nitrox left valve

T-SVO 300 NITROX-L

179.00 €

Fuera de Stock

Ask us about availability

Lola Valves

Lola T-SVO 300 Nitrox right valve

T-SVO 300 NITROX-R

179.00 €

Fuera de Stock

on demand

Lola Valves

Lola Valves Set T-SVO 200 BD Nitrox 3/4"

SET T-SVO 200 BD NITROX

411.89 €

Set of right and left speleo valve for tanks with 3/4'' NPSM thread 200Bar / 2900psi intended mainly for double assembly and SCR devices. Valves are oxygen clean (nitrox). The burst disc port is fitted with a plug. Really robust valve with a design studied to facilitate handling in any environment, no matter how narrow or difficult, significantly...

Fuera de Stock

on demand

Lola Valves

Lola Valves Set T-SVO 200 Nitrox

SET T-SVO 200 NITROX

344.00 €

Set of right and left speleo valve for tanks with M25 thread 200Bar / 2900psi intended mainly for double assembly and SCR devices. Valves are oxygen clean (nitrox). The burst disc port is fitted with a plug. Really robust valve with a design studied to facilitate handling in any environment, no matter how narrow or difficult, significantly increasing the...

Fuera de Stock

on demand

Lola Valves

Lola Valves Set T-SVO 300 BD Nitrox 3/4"

SET T-SVO 300 BD NITROX

411.89 €

Set of right and left speleo valve for tanks with 3/4'' NPSM thread 300Bar / 4350psi intended mainly for double assembly and SCR devices. Valves are oxygen clean (nitrox). The burst disc port is fitted with a plug. Really robust valve with a design studied to facilitate handling in any environment, no matter how narrow or difficult, significantly...

Fuera de Stock

on demand

Lola Valves

Lola Valves Set T-SVO 300 Nitrox

SET T-SVO 300 NITROX

344.00 €

Set of right and left speleo valve for tanks with M25 thread 300Bar / 4350psi intended mainly for double assembly and SCR devices. Valves are oxygen clean (nitrox). The burst disc port is fitted with a plug. Really robust valve with a design studied to facilitate handling in any environment, no matter how narrow or difficult, significantly increasing the...

Fuera de Stock

Ask us about availability

J.Dive HQ rubber hoses

Regulator Hose, hookah

30.56 €

Hookah hose with standard 3/8" and 9/16" regulator connections. Do you need any other length or connection type? no worries, we can make for you, ask you about it...

Fuera de Stock

Ask us about availability

Spare parts

Tank band with S.S cam buckle

30046

24.15 €

Fuera de Stock

On demand

TWIN TANKS

Twin tank Lola 2 x 12 Concave base

Lola2x12-flat

1,047.11 €

Twin set 2x12 Concave base assembled with Lola valves, BtS tank bands and Eurocylinders tanks

Fuera de Stock

Out-of-Stock

inicio

2nd stage Elbow

J.Dive-elbow1

49.58 €

Very high quality swivel elbow made of steel, to be mounted on the inlet hose of the 2nd stage of the regulator. Standard connections 9/16" male-female

View

Fuera de Stock

-20%

Out-of-Stock

REGULATOR ACCESORIES

2nd Stage Elbow Swivel

J.Dive-elbow4

29.42 € 36.78 €

Second Stage Elbow Swivel9/16" - 18 male to 9/16" FemaleCaptured O Rings for safer swivel

View

Fuera de Stock

Out-of-Stock

REGULATOR ACCESORIES

Adaptader 9/16" female to 3/8" male

J.Dive-9-16

21.97 €

Adapter with 9/16" female connections on one side (standard second stage) and 3/8" male connections on the other (standard LP output 1st stage)

View

Fuera de Stock

Out-of-Stock

Harness & Backplates

Backplate Stainless Steel 304

80143

96.56 €

J.Dive Systems Backplates are made of 304 stainless steel, optimal steel to withstand the harsh treatment that diving equipment is subjected to. They are the universal standard, making them compatible with any twin bottle wing and with many single tank wings, depending in the latter case on the height measurements at which the wing has the slots to pass...

View

Fuera de Stock

Out-of-Stock

STEEL HARDWARE

Belt stop serrated Stainless Steel 316L

80125

1.30 €

Serrated stainless-steel stopper for 50 mm (2") strap.

View

Fuera de Stock

Out-of-Stock

Tools

Combi Inflator tool

80056

4.00 €

Tool to be able to disassemble the inflator end and perform its maintenance. The tool also incorporates the notches to disassemble the knobs of the tanks valves

View

Fuera de Stock

Out-of-Stock

TANKS & MORE...

ISC Oxygen decal

ISC DEC Oxygen decal

4.12 €

MEG® Oxygen Sticker Dimensions: 20cm x 5cm

View

Showing 121-144 of 155 item(s)

Product added to wishlist