Combi Inflator tool

Reference 80056

Out-of-Stock

4.84 €

Tax included

4.00 € tax excl.

Tool to be able to disassemble the inflator end and perform its maintenance.

The tool also incorporates the notches to disassemble the knobs of the tanks valves

Out of stock

You are adding more units than are currently available.

Brand

Condition New product

No reviews

Customers who bought this product also bought:

En Stock

Available

Spare Parts, tools...

Schraider Valve for Inflator Hoses

ACC-HOS-0020-uni

2.90 €

En Stock

Available

J.Dive HQ rubber hoses

J.Dive, regulator rubber hoses

16.46 €

Traditional rubber with brass fittings Length is measured from end to end of hose 3/8-inch male to 1st stage - 9/16-inch female to 2nd All hoses are Nitrox Ready

En Stock

Available

SI TECH

Si tech Silflex wrist Seal

11.65 €

Extremely flexible - tremendously increased well being, one size fits a wide range of wrists. Less sizes to stock. Less strain to wrist. Great material stability - better against ageing and UV light. Better for allergies. Less friction (antifriction coat on the inside). Two sizes and two colors available NOTE! The price is for ONLY ONE UNIT and not for...

En Stock

Available

STEEL HARDWARE

stainless steel d-ring, low profile

DTD 3013

2.06 €

En Stock

Available

STEEL HARDWARE

Xdeep NX Series boltsnap for regulator

AC-012-0

9.99 €

A completely new shape of the head prodvides better support for the finger and more assured grip. A larger opening, a perfectly slim hook part of the head and a large trigger makes clipping amazingly easy, especially in thick gloves. Finally, the weight to strength ratio has been optimized to make it over 30% lighter than a regular bolt snap. made of...

Fuera de Stock

Ask us about availability

Gas fills, analysis & decanting

Gas equalizer with pressure gauge for O2 use

135.00 €

Constructed of high pressure 5000 psi (350 bar) hose and made to equalize or fill one tank from another. Set up to equalize from the tank with highest pressure to the tank with the lowest pressure. Comes with bleeder valve to safely detach and ready to help make your scuba diving safe and fun. This model has a pressure gauge installed It´s able to use...

En Stock

Available 24-48h

Accessories

Xdeep STEALTH 2.0 back D-ring set

HA-052-0

15.00 €

The Back D-rings for the Stealth 2.0 are the square D-rings that extend off the waist band, which are used for the lower tank conection point (unless using a butt plate). Additional Back D-rings can be useful for additional stage tanks or accessories, on the Stealth or any other technical diving harness. The Back D-Rings have four slots for threading onto...

Fuera de Stock

Ask us about availability

Spare parts

Slide Tri Glide

SFSTG

5.00 €

Slide tri glide for 50mm webbing.It can be use for different applies, one of them and the most demanding is mounting it on the back of the back plate, making the cinch able to run over it and making the harness infinitely adjustable.

En Stock

Available

Spare parts

Scubapro INT to DIN 300 bar Conversion Kit, Universal

10.045.030

71.39 €

Conversion Kit Universal (MK10, MK14, MK16, MK17, MK18, MK20, MK25) This adapter allows you to easily convert your first stage, if required, so you can use your own gear rather than rental gear!

En Stock

Available

Spare parts

Double Gasket

A11918020

3.50 €

This is the gasket that goes between the male and female pieces that serve as seats for the overpressure valves and wing elbows. Measures: Outer diameter: 50mm Inner diameter: 25mm