DIVE GEAR

LIGHTING

Photo and Video

JACKETS

REGULATORS

BACKPLATES/WINGS

SUITS

Sidemount/Caving

Adjustable Fins

Foot Pocket Fins

MASK

COMPUTERS

REGULATOR HOSE (Rubber & Miflex)

CONTROL INSTRUMENTS

STEEL HARDWARE

DECO ESSENTIALS

REELS, WETNOTES, BUOYS...

Knifes & Cutters

BUNGEE MOUNTS/COMPASS

Sealing systems

DRYSUIT INFLATOR SYSTEMS

TANKS/VALVES

pee-valve, condoms, quick connec

Gas fills, analysis & decanting

ANALYZERS

ADAPTERS

Transport bags

Hygiene and Care

Weight

Tools

Face Mask

Miscellaneous

Compressors

Pre Owned

Scooters

Outlet

Lifting Balloons

En Stock

Available

J.Dive HQ rubber hoses

J.Dive HP hoses

14.00 €

HP hoses manufactured with a somewhat harder rubber than the standard HP hoses available at the market. This offers a better resistance to abrasion and is especially indicated for users who use the equipment in a hard conditions. If you need any hose length not available in the drop-down menu, chose the next higher one and let us know the exact length...

View

En Stock

Available

J.Dive HQ rubber hoses

J.Dive HP Hoses +

22.90 €

High pressure hoses are without a doubt the piece of equipment that suffers the most. Both the pressure they are subjected to and the bends they are subjected to make them last less than LP hoses. These hoses are mounted on black rubber, which is very flexible and light, while also being very resistant. Their docility means that they can be bent, routed,...

En Stock

Available

J.Dive HQ rubber hoses

J.Dive LP Inflator Hose +

26.20 €

These LP inflator hoses are mounted in classic medium rubber with high abrasion resistance and a very good balance between hardness and malleability. High quality bushings are used, carefully assembled to give them the longest possible useful life. Standard connections 3/8" male to quick connection

En Stock

Available

J.Dive HQ rubber hoses

J.Dive LP Regulator Hoses +

21.00 €

These LP regulator hoses are mounted in classic medium rubber with high abrasion resistance and a very good balance between hardness and malleability. High quality bushings are used, carefully assembled to give them the longest possible useful life. Standard connections: 9/16" female and 3/8" male

En Stock

Available

Harness & Backplates

J.Dive sidemount harness

jdive0013

90.91 €

En Stock

Available

CONTROL INSTRUMENTS

J.Dive SPG (52mmø)

jdive0022

49.29 €

The white indexes on the black dial make the readability much clearer than on the classic white manometers. It also has a scale from 0 to 300, thus also achieving greater reading accuracy and a faster interpretation of the data. The numbers, indexes and needle are luminescent and highly legible in the dark after a few brief seconds of exposure to light.

En Stock

Available

J.Dive Systems

J.Dive SS backplate

jdive0001

117.15 €

New version of our Backplates with notable improvements in finishes.As always, compatible with all wings on the market, at least those known by us, "made in spain with proud" using 316L stainless steel.We dare to say that this new version is one of the best backplates currently available on the market. Customizable: Want to personalize your backplate?...

En Stock

Available

Accessories

J.DIVE STRAP FOR BACKPLATE

jdive0016

12.40 €

Harness webbing Harness webbing with a very balanced texture between rigidity and comfort. Stainless steel eyelet installed in the center. 3.5m long (do you need longer cinch? ask us about it) 50mm wide x 2.4mm thick

En Stock

Available

J.Dive HQ rubber hoses

J.Dive, regulator rubber hoses

13.00 €

Traditional rubber with brass fittings Length is measured from end to end of hose 3/8-inch male to 1st stage - 9/16-inch female to 2nd All hoses are Nitrox Ready

Fuera de Stock

-20%

Out-of-Stock

Complete single gear

J.Dive/Apeks WTX PSD

495.86 € 619.83 €

You can mount your own Apes PSD equipment with the backplate and harness you really need.

View

Fuera de Stock

-20%

Ask us about availability

Complete single gear

J.Dive/Apeks WTX-D30/D40

469.42 € 586.78 €

En Stock

Available

J.Dive HQ rubber hoses

JDIve inflators rubber hoses

16.00 €

Fuera de Stock

Ask us about availability

DECO ESSENTIALS

JJ CCR Bailout Clamps (pair)

62100101

19.00 €

Stainless steel cylinder clamps with webbing to prevent scratches and abrasions. Used to secure the diluent cylinders, typically 7 liter or similar, in a GUE configured JJ CCR. Four would normally be required per unit.

En Stock

Available

JJ-CCR

JJ-CCR 3-Way Manifold

4100-30

53.72 €

3-way manifold with 9/16" male connection (to connect a standard regulator hose) and three 3/8" female connections (for standard regulator hose connection)

En Stock

ADAPTERS

JJ-CCR Flow Stop

3000-10

64.00 €

En Stock

Available

JJ-CCR

JJ-CCR Mouthpiece for BOV or DSV

2050-20

15.70 €

En Stock

Available

JJ-CCR

JJ-CCR Over pressure valve for 1st stage (10bar)

2010200003

29.00 €

Overpressure valve preset at 10Bar, indicated for the 1st stage of Oxygen Adjustable from 0 to 10 bar

En Stock

Available

Reels & Spools

JJ-CCR SPOOL

2000-62

61.00 €

Sppol JJ-CCR manufactured from a block of machined Delrin. It has 30m of green fluorine thread and includes a 115mm steel double carabiner Its measurements are 45mm wide by 77mm in diameter

En Stock

Available

DECO ESSENTIALS

Jon Line

ACRT-43

14.38 €

Jon Line helps the diver remain in the same location at a certain depth when performing decompression stops. Comes with it’s own storage pouch, which has a loop to fit any 5cm (2”) webbing for carrying purpose. Webbing material: 2.5cm (1”) wide nylon Length: 2.1m (7ft) Hook material: 4mm 304 stainless steel

En Stock

-60%
New

Available

Gloves

Kallweit 2,5mm Neoprene Gloves

18.18 € 45.45 €

2.5mm fine touch neoprene gloves, ideal for both warm waters and for use in our dry glove systems as an inner glove for very cold waters.

En Stock

-60%
New

Available

Gloves

Kallweit semi dry gloves

31.40 € 78.51 €

5mm neoprene gloves with Kevlar reinforcements on the palms and fingertips. They have an additional cuff that prevents water from entering, making them almost like dry gloves. They offer unparalleled thermal protection.

Fuera de Stock

-30%

Product available with different options

Kevlar hoses

Kevlar HP hose

25.20 € 36.00 €

Kevlar HP hose Kevlar High pressure Available in various lengths (from 10-150 cm)

View

En Stock

kit for Maintenance and reparations of dry suits

-25%

Available

Care & reparations

kit for Maintenance and reparations of dry suits

495007-0004

37.19 € 49.59 €

Kit for maintenance and small repairs of dry suits. The kit contains glue for repairs, talc and wax for maintenance, a brush to apply the glue, a cleaning cloth and a bag to transport everything tidy.essential to always carry on.

Fuera de Stock

Ask us about availability

KUBI

Kubi complete Dry Glove System 100mm Standard set

197.43 €

The KUBI Standard System is designed to be fitted directly to the existing Latex or Silicone cuff seals of your drysuit, via our oring system. A Standard Full Set includes: * KUBI Rings system * Orings as required * Pre-fitted Standard Latex Gloves * Standard Thermal Gloves * KUBI Carry Case

Showing 1969-1992 of 4143 item(s)