Fuera de Stock New Ask us about availability BACKUP/HAND LIGHTS Artek Dolphin MK3 154.90 € The diving light Dolphin MK3 is the smaller option of the ARTEK family.It has 600 lumen power output and a very high light penetration during immersion. It reaches the ipressive quantity of 31000 lux at 1 meter. Two options available: Option 1: Only the dive light, transport bag and extra O-Ring as spare part.Option 2: All the above items + batterie and... Add to cart
Fuera de Stock New Ask us about availability Artek Artek Kraken ARKR01 369.90 € New demands from users increasingly point to powerful spotlights with decent burn times but dispensing with the typical battery system with umbilical. The Artek Kraken was born from that need, designed with the power of the MEGALODON but without the external battery pack connected by umbilical. The result, a very powerful focus with more than decent... Add to cart
Fuera de Stock New Ask us about availability Artek Artek Kraken with Goodman Handle (set) ARKR01S 429.90 € New demands from users increasingly point to powerful spotlights with decent burn times but dispensing with the typical battery system with umbilical. The Artek Kraken was born from that need, designed with the power of the MEGALODON but without the external battery pack connected by umbilical. The result, a very powerful focus with more than decent... Add to cart
Fuera de Stock Ask us about availability Artek Artek® Barracuda 221.90 € The new Artek Barracuda comes to replace the old Orca and Tigershark, counting this new model with more power and a smaller diameter head. Light power: 1300 lumens Material: 7075 Aluminum Alloy. Aircraft Grade Finish: HAIII hard anodized, Mil-STD 8625 standard LED type: Cree XM-L2 led diode. Cold light (min 6500K) Autonomy: On the surface 90 minutes... Add to cart
Fuera de Stock Ask us about availability Artek Artek® Megalodon Mk2 545.00 € The primary light Megalodon mk2 is the evolution of the ARTEK®’s flagship. It has been designed to deliver 1280 lumens of light output with higher light penetration during immersion. The small size of the battery canister is impressive. New features to increase security to this high-end unit. Access to the complete technical specifications Add to cart
En Stock New Available Spare parts Scubapro 2nd stage Diaphragm 10.29 € Diaphragm for Scubapro second stages. Choose the necessary option from the drop-down menu following the relationship in the following list: Option 1: S600, S550, G500, R390, R380, R290, S270 Option 2: A700 Option 3: D420 (3 pieces: diaphragm, disc and disc insert) Option 4: R195, G260 Option 5: R295, R395, R095 Option 6: G250, R190 Option 7: X650,... Add to cart
Fuera de Stock -20% Ask us about availability inicio Scubapro A1 and A2 Metal Strap 05.064.015 188.00 € 235.01 € Add to cart
Fuera de Stock -20% Ask us about availability inicio Scubapro A1 and A2 Nato Strap 05.064.020 52.80 € 66.01 € Add to cart
En Stock -18% Available inicio Scubapro Aladin A1-A2 Silicone Wrist Strap Correa A1-A2 54.12 € 66.01 € NOTE: The price is for the strap, the computer is not included Add to cart
Fuera de Stock New Ask us about availability Spare Parts & Accessories Scubapro BPI Prior 2013 Spare Parts 2.42 € Spare parts for the Scubapro end inflator control (BPI), model prior to 2013 Study the diagram carefully and choose the necessary parts according to the numbered relationship, also explained in the list below. Please note that spare parts are NOT returnable. 1: 65cm hose (go to this link to get this part) 2: O-Ring 3: NOT AVAILABLE 4: Retaining ball... Add to cart
En Stock Available Spare Parts & Accessories Scubapro BPI Quick Connect 21.626.013 28.00 € Add to cart
Fuera de Stock Ask us about availability inicio Scubapro Buckle Protectors 24.105.000 10.50 € The sleeve slides over the quick-adjust buckle, protecting it from bumps from transport and flying debris. NOTE: The mask visible in the photo IS NOT INCLUDED Add to cart
Fuera de Stock New Ask us about availability Spare parts Scubapro Cover Plastic R105 11.332.036 15.73 € Add to cart
Fuera de Stock New Ask us about availability Spare Parts & Accessories Scubapro Elbow and OPV for jackets 3.39 € Replacement elbows and OPV-drain valves for Scubapro jackets. Spare parts are common for almost all jacket models, with only a few exceptions. If you have any questions about compatibility with your model, please contact us before placing your order. Choose the necessary spare part from the drop-down menu according to the numbering in the diagram. Part... Add to cart
En Stock New Available Scubapro wings spare parts Scubapro Ergo Nut Set 22.247.101 13.55 € Housings for the backplate-wing fastening handles of the Scubapro wing kits Add to cart
En Stock New Available Spare parts Scubapro Exhaust Valve for 2nd stages type A, S, R, C 11.250.103P 7.74 € Exhaustion Tee for the second stages: A700 all models S600 all models S620 all models G250 all models G260 all models C370 R195 all models R105 all models R095 all models Add to cart
Fuera de Stock Ask us about availability inicio Scubapro G2 and Aladin Square Strap 06.204.468 18.79 € Add to cart
Fuera de Stock New Ask us about availability Spare parts Scubapro G250V 2nd stage Cover 11.261.020 26.62 € Add to cart
En Stock New Available Spare parts Scubapro G250V 2nd stage exhaust cover 11.261.024 10.89 € Add to cart
En Stock New Available Accessories-spare parts Scubapro Go Sport Skegs 6.70 € These skegs work to minimize sideslip and maximize stability when kicking and maneuvering in the water. Fins come standard with either silver or black skegs. However, optional skegs are available in a variety of colors for customization or to color-code sizing. These skegs works with the Seawing Supernova and Go Sport fins Supplied in packs of 4 units Add to cart
En Stock Available inicio Scubapro INT to DIN Conversion Kit, Universal 10.045.030 59.99 € Conversion Kit Universal (MK10, MK14, MK16, MK17, MK18, MK20, MK25) This adapter allows you to easily convert your first stage, if required, so you can use your own gear rather than rental gear! Add to cart
En Stock Available inicio Scubapro Mask Strap with velcro 24.700.010 11.00 € Enjoy your dives wearing a mask decked out with a neoprene hook & loop strap. These straps are easy to use and ultra-comfortable. Makes quick and easy work of donning your mask, even when wearing gloves. Replaces silicone strap. Attached with hook & loop straps to your mask buckles. Add to cart
En Stock New Available Tools and grease Scubapro Nut Socket Tool 43.191.107 61.71 € 25mm hexagonal wrench especially indicated for removing the YOKE connection nut of all Scubapro regulators. It is also valid for Cressi YOKE regulators 6mm Allen connection for the driver stud Add to cart
En Stock Available inicio Scubapro O-Ring Kit for BPI Inflator End 21.626.045 18.00 € O-Ring kit for Scubapro Tek-BPI Inflator System (Tek, Balance and more...) Add to cart
Fuera de Stock Ask us about availability inicio Scubapro Regulator Repair Tool 43.040.000 87.12 € This professional emergency tool performs 13 different functions for Scubapro regulators. The handle protects your hand from pins, when this section of the tool is not used. Made of high impact machined plastic with just about everything you will need to remove a first stage plug, tighten a low pressure hose to a regulator, loosen a BCD hose and much... Add to cart
Fuera de Stock New Ask us about availability Accessories-spare parts Scubapro Seawing Nova Buckle Body 25.712.002 7.00 € Add to cart
Fuera de Stock New Ask us about availability Accessories-spare parts Scubapro Seawing Nova Buckle Body Cover 25.712.001 7.00 € Add to cart
Fuera de Stock New Ask us about availability Accessories-spare parts Scubapro Seawing Nova Bungee Cord 7.41 € 4 lengths available S: 245mm M: 255mm L: 265mm XL: 275mm Add to cart
Fuera de Stock New Ask us about availability Accessories-spare parts Scubapro Seawing Nova Complete Fin Strap 49.01 € Add to cart
Fuera de Stock New Ask us about availability Accessories-spare parts Scubapro Seawing straps (pair) 25.557.001 31.00 € Replaceable self-adjusting bungee heel straps for Seawing and Seawing Supernova fins allow for a versatile fit and make these high-performing fins easy to don and doff. Features: New heavy-duty bungee for added durability. Adjustable strap position with 3 options to find the perfect fit. Sold as a pair. Available in Midi size only. Add to cart
En Stock New Available Accessories-spare parts Scubapro Seawing Supernova lock plate set (pair) 25.558.001 8.40 € Lock plate set includes 2 right and 2 left lock plates for assembling your Seawing Supernova. Add to cart
En Stock New Available Accessories-spare parts Scubapro Seawing Supernova Tool 25.550.001 11.80 € Included with every pair of Seawing Supernova Fins, this key-fob style multi-purpose tool is all you need to easily assemble and disassemble your Supernovas. Smart lever (screwdriver tip) easily removes lock plates from fins. Molded in reinforced plastic. Blue colour for visibility in your dive bag. Fin strap buckle adjustment: pin pusher & puller... Add to cart
En Stock Available inicio Scubapro Smart Tec-Tec-Prime-One-Digital 330... Strap 06.201.851 18.79 € Strap for Scubapro models: Smart Tec, Z, Pro, Aladin Tec, 2G, Prime, One, Digital 330 pre. 2013 Add to cart
Fuera de Stock Ask us about availability inicio Scubapro Strap ASSY for 2G, One, Sport, 3G, Digital 330, XP10, XP3G, Prime 06.204.268 18.79 € Add to cart
Fuera de Stock Ask us about availability inicio Scubapro Strap for 2G, One, Sport, 3G, Digital 330, XP10, XP3G, Prime 06.204.269 18.79 € Add to cart
Fuera de Stock Ask us about availability inicio Scubapro Strap for Galileo Sol, Luna, Terra 06.203.027 34.00 € Add to cart
En Stock New Available Spare parts Scubapro YOKE Adjustment screw 27.39 € Adjustment screw for the YOKE connections of the Scubapro 1st stages. Choose the right one for your model from the list below: Item nº1: Mk2, Mk11, Mk17, Mk21, Mk25 Item nº2: Mk16, Mk18 Item nº3: Mk19 NOTE: the thread size are common for all models, being able to use any of them with all Scubapro models Add to cart
En Stock New Available Tools and grease Scubapro YOKE Extractor Drive Tool 43.040.009 32.67 € Necessary tool to operate the YOKE core extractor tool through the YOKE termination hole of the Scubapro regulators. Suitable for use with Cressi regulators. 6mm Allen male stud for connection to extractor wrench and 12.5mm female universal connection for ratchet wrenches. Add to cart
En Stock Available Spare parts Scubapro, Silicone valve seat 11.250.221 3.99 € Silicone valve seat for Scubapro 2nd stage Add to cart
Fuera de Stock Ask us about availability Steel Tanks Steel tank 10 liters Faber TNK-232-0010 283.99 € Faber steel tank of 18 liters capacity with paint finish according to current Spanish regulations. Neck thread 25x2 flat (EN-144) Mono valve inlcuded Working pressure 232 Bar Empty weight (without boo and without valve): 12,2 kg (+/-3%) Diameter: 171mm Height: 59,5cm Boot included Add to cart
Fuera de Stock Ask us about availability Steel Tanks Steel tank 12 liters 232Bar Faber TNK-232-0012 305.99 € Faber steel tank of 12 liters capacity with paint finish according to current Spanish regulations. Neck thread 25x2 flat (EN-144) Mono valve inlcuded Working pressure 232 Bar Empty weight (without boo and without valve): 15,9 kg (+/-3%) Diameter: 203mm Height: 55cm Boot included Add to cart
Fuera de Stock Ask us about availability Steel Tanks Steel Tank 15l 232Bar Faber 341.99 € Faber steel tank of 15 liters capacity with paint finish according to current Spanish regulations. Neck thread 25x2 flat (EN-144) Working pressure 232 Bar Empty weight (without boo and without valve): 17.4 kg Diameter: 203mm Height: 63cm Boot included Add to cart
Fuera de Stock Ask us about availability Steel Tanks Steel tank 18 liters 232Bar Faber TNK-232-0018 373.49 € Faber steel tank of 18 liters capacity with paint finish according to current Spanish regulations. Neck thread 25x2 flat (EN-144) Mono valve inlcuded Working pressure 232 Bar Empty weight (without boo and without valve): 21 kg (+/-3%) Diameter: 203mm Height: 71cm Boot included Add to cart
Fuera de Stock Ask us about availability Steel Tanks Steel tank 5 liters 200Bar Faber TNK-200-0005 229.30 € Faber steel tank of 5 liters capacity with paint finish according to current Spanish regulations. Neck thread 25x2 flat (EN-144) Mono valve inlcuded Working pressure 232 Bar Empty weight (without boo and without valve): 7,5 kg (+/-3%) Diameter: 140mm Height: 47cm Boot included Add to cart