Artek® Barracuda

Main specifications:

• Luminous fux: 1150 lumens (173 in Battery Saving Mode)
• Illuminance: 80.000 luxes 1m distance
• Emitter: L.E.D. from Cree.
• Run Time: 1:45h 100% and 2more hours at 15% (battery saving mode)
• Battery type: 2 units of Panasonic 18650 3,7v and 3400 mAh (optional)
• Charger: dual charger (optional)
• Color rendering index CRI: 70 min
• Color temperature: 6500 K
• Beam profile: Spot ±2º --- Spill ±32º
• Head diameter: 59,5mm
• Body diameter: 24,5mm
• Length: 219,2mm
• Weight with battery: 376gr

DESIGN PROCESS

Orca is the most powerful ashlight produced by ARTEK®, thus we have taken special care with this design. The body is made of a single piece of aluminum, providing robustness and eliminating possible sealing problems. There is an aesthetic redesign, slightly changing its appearance thanks to the hard anodized without pigment and more minimalist and stylized lines. There is also an improvement in the cocentration of the main beam (spot), getting a much more penetrating light.

LIGHT POWER AND RUNTIME

This ashlight has a power of 1100 lumens with an impressive spot. The power is constant during 1 hour and 45 minutes. In 2012 we presented our rst version of the Orca with 1000 lumens.

OPTICAL SYSTEM

The combination of a specially selected quality LED and the aluminium reector designed by ARTEK® makes possible to have a beam of more than 80.000 lux at one meter. Previous version have 42.000 lux at one meter.

BATTERY WARNING AND SAVING MODE

Orca mk2 light has a low battery warning device. With a few flashes, it alerts us that the battery is low. Automatically, after flashes, the power drops to the level of battery saving mode. In this way the remaining autonomy increases and we do not run out of light, allowing us to access our backup focus if necessary.

C.T.P.

It has a temperature control that oers security. This ashlight can be used on surface use without any risk, since in the event of an increase in temperature, the power is regulated gently, avoiding dangerous temperatures.

RELACIÓN TAMAÑO - PRESTACIONES

To be able to deliver 850 lumens for 2 hours and 30 minutes makes it necessary to use two high-capacity lithium batteries. We also use a big reector. Still, we have a very contained size.

QUALITY

All components of this unit, from the battery to the LED itself, are extremely well cared for. The material used for the flashlight body is machined aeronautical grade aluminium anodized according to
military specifications. The LED is manufactured by CREE®, but it is also carefully selected to have the performance we demand.
The reflector is designed to provide a concentrated beam with high eficiency. The batteries are lithium batteries, with high capacity and no memory eect.

MADE IN SPAIN

Like all our ashlight, it is designed and manufactured in Spain, from the SMDwelding process into the PCB, to themachining and anodizing of the aluminumbody. In addition, unit has its own unique serialnumber that identies it.