DIVE GEAR

LIGHTING

Photo and Video

JACKETS

REGULATORS

BACKPLATES/WINGS

SUITS

Sidemount/Caving

Adjustable Fins

Foot Pocket Fins

MASK

COMPUTERS

REGULATOR HOSE (Rubber & Miflex)

CONTROL INSTRUMENTS

STEEL HARDWARE

DECO ESSENTIALS

REELS, WETNOTES, BUOYS...

Knifes & Cutters

BUNGEE MOUNTS/COMPASS

Sealing systems

DRYSUIT INFLATOR SYSTEMS

TANKS/VALVES

pee-valve, condoms, quick connec

Gas fills, analysis & decanting

ANALYZERS

ADAPTERS

Transport bags

Hygiene and Care

Weight

Tools

Face Mask

Miscellaneous

Compressors

Pre Owned

Scooters

Outlet

Lifting Balloons

En Stock

Available

Hardware things...

Aluminium D-Ring 50mm

A24518004

4.79 €

En Stock

Available 24-48h

STEEL HARDWARE

Book screw tool

A11918097

1.65 €

Specific tool to facilitate the screwing-unscrewing operation of the Book screw set for backpad, backplate, argon systems, etc It is sold individually but two pieces are recommended to facilitate the work Link to the Screw set

En Stock

-18%

Available

Spare parts-kits

Boquilla Mares Jax Termomoldeables

Boquilla Mares Jax

23.68 € 28.88 €

The Mares Jax Mouldable mouthpiece for your regulator are certainly not cheap but once fitted you will realise what you spent your money on! Designed by an actual orthodontist and allows you to mould your mouthpiece to your own individual mouth and teeth shape. Simply immerse JAX in boiling water for a few seconds and then clamp it between your teeth to...

Fuera de Stock

Product available with different options

Accessories

BtS Grip Pad

1.98 €

OMS Grip pad for insertion in the tank-holder straps, Made of soft rubber, the tank does not slip and stay firm.Suitable for all tanks neck straps 5cm (2 ") wide. NOTE: The photo in gray shows the OMS logo, however, the correct logo is the BtS one.

View

En Stock

-40%

Accessories

Butt Plate Sidemout - XR Line

417510

39.17 € 65.29 €

1200D “bulletproof” Ballistic Nylon Polyphrene hydro-drainage comfort padding 4 holes along the bottom allow for the mounting on any harness as well as adding accessories Provide the proper amount of rigidity to hold tanks in position and eliminate sag Two stainless steel 316 marine grade handles used for tank attachment

En Stock

Mares 1st stage service kit 82X/75XR/72X

Available

Spare parts-kits

copy of Mares 1st stage service kit 62X

46201836

32.23 €

Maintenance kit for the first stages Mares 62X DIN and YOKE versionThe kit is complete, it contains all the O-rings, valve, diaphragm and its fixing washer, etc ...

En Stock

-21.83%
New

Available

MARES

copy of Mares Puck Lite Orange

414172BKWH

147.94 € 189.26 €

The new Mares Puck Lite computer has been designed for simple and intuitive use. It has all the features that a recreational diver could need, including Nitrox up to 50% It also has Bluetooth connectivity which will facilitate the downloading of the dive log for those users who like to study the profiles and/or share them online with their buddies.

En Stock

Available

Spare parts

Corrugated universal hose (OMS)

15.21 €

This corrugated hose is used to connect the BC to the power inflator. These standard corrugated hoses are compatible with both wings and regular BCs. This hose is perfect as a spare, especially for brands like:OMS, Halcyon, Dive Rite, xDEEP, IST, Hollis… and more brands…. Choose your size: Option 1: 32,5cm (13") Option 2: 40cm (16") Option 3: 48cm (19")

En Stock

Available

inicio

Cover for Book Screw nut flat

A11818019

0.80 €

Rubber cover for Book Screw nut flat 1/4" Link to the Book Screw nut NOTE: The price corresponds only to the rubber cover, the visible nut in the photo is for illustrative purposes

En Stock

-20%

Available

STEEL HARDWARE

D-Rings Bent SS316 Mares XR Line

417526-uni

2.61 € 3.26 €

Mares D-Ring Bent Stainless Steel 316

En Stock

Available

Hardware

D-Rings FLAT SS316 Mares XR Line

417525

3.26 €

Mares D-RIng Flat 50mm wide

En Stock

Available

Spare parts

Double Gasket

A11918020

2.89 €

This is the gasket that goes between the male and female pieces that serve as seats for the overpressure valves and wing elbows. Measures: Outer diameter: 50mm Inner diameter: 25mm

En Stock

Available

Spare parts

Elbow Assembly with OVP with cable

28.10 €

Elbow Assembly with OVP with cable suitable. There are 3 lengths options for the cable: 33cm 40cm 48cm

En Stock

Available

Spare parts

Elbow O-Ring

0.83 €

Replacement O-ring for the trachea elbow. OPTION 1: Wings manufactured after 2015. (Dimensions: outside 40mmø, inside 30mmø and 3.8mm thick) OPTION 2: Wings manufactured before 2015 and also for Halcyon, Dive Rite, IST, Xdeep, Hollis, EDGE, HOG ... (Dimensions: Outside 38mmø, Inside 25mmø, and 3mm thick) Choose the appropriate one you need from the...

En Stock

Available

Spare parts

Elbow OMS (newest version, universal)

A11918023

4.21 €

The newly designed OMS elbow can be used in any wing of the most common such as, obviously, all OMS, halcyon, Edge, Xdeep, Dive Rite, etc ... if you have any questions, ask us. To this new design has been added a very marked stretch mark, in this way the trachea is much more secured once installed and even losing the flange it is highly unlikely that the...

En Stock

Available

Spare parts

EPDM Rubber Band for Harness

A11918011

1.65 €

En Stock

Available

Spare parts

Inner coupling

A11918021

3.55 €

Male piece that goes inside the wing, which serves to anchor both the elbow system and the exhaust / drain valve. It is suitable for many wings of the market, for the most common brands such as, OMS prior to 2015, Halcyon old wings*, Edge*, Dive Rite*, Xdeep,* etc... Outer diameter: 49.2mm *NOTE: compatibility refers exclusively to the thread pitch

En Stock

Available

Hardware things...

IQ Lite screw (Nylon) 6 pieces

A11918074

6.61 €

En Stock

Available

Miscellaneous

Magnetic Connector

415804

24.75 €

The innovative magnetic securing system by Mares is the ultimate way to connect your diving accessories and equipment. Gone are the days of dangling hoses and lost dive lights. The Magnetic Connector is a versatile and unique system that includes many uses such as an octopus and console holder, torch/dive light hook, camera attachment, and much more!

En Stock

Available

Arrows & Cookies

Marcadores no direccionales Mares

2.23 €

Injection molded ABS Supplied in packs of 5 Made in ABS for durability Unique technical design with: Corners removed for ease of use, Line guiding curves and grooves, Holes for ring/identifier clipping, Dedicated surface for marking Used for orientation as a visual and tactile reference on a guideline

En Stock

Available

Chargers, batteries and cables

Mares 18650 Lithium battery for Torches...

44201408

24.79 €

Genuine Mares battery for the light torches: EOS 10LR EOS 10LRW EOS 5LRZ If your Mares Torch is not on the list, check old battery and be sure is the 18650. Any doubt regarding the compatibility, please, contact us before place the order. Specs: Size 18650 Lithium battery 2600mAh 3,7v 9,2W/h

En Stock

Available

Tools

Mares 18mm Allen wrench

46201441

8.18 €

18mm Allen wrench for disassembling the sealed chambers of some 1st stages, such as the 25XR and... It has measurements and weight of: 190mm x 90mm x 18mm 565g

En Stock

Available

Spare parts-kits

Mares 1st stage 88x and 28x service kit

46201861

38.00 €

Service kit for all 1st stages Mares 88x and 28x Includes everything necessary except for the membrane (see products at picture)

En Stock

Available

Spare parts-kits

Mares 1st stage diaphragm ... 12 models

46185022

4.89 €

Main diaphragm for 1st stages MR22 Ruby, MR22 (2005), V32, V16, MR16, TI Planet, MR12, V12, MR12 Long, 12S, MR10, MR II

Showing 1-24 of 615 item(s)

Product added to wishlist