En Stock Available Accessories BtS Grip Pad 2.50 € OMS Grip pad for insertion in the tank-holder straps, Made of soft rubber, the tank does not slip and stay firm.Suitable for all tanks neck straps 5cm (2 ") wide. NOTE: The photo in gray shows the OMS logo, however, the correct logo is the BtS one. Add to cart
En Stock Available Spare parts Complete elbow assembly A11918022 23.99 € Complete elbow kit for OMS wings manufactured before 2015, Halcyon manufactured before 2018 and many other brands such as Xdeep, Dive Rite, Hollis, Tecline, Hog, EDGE ... Ask us if you have any questions-doubts about compatibility with your wing gear Add to cart
En Stock Available Spare parts Corrugated universal hose (OMS) 20.30 € This corrugated hose is used to connect the BC to the power inflator. These standard corrugated hoses are compatible with both wings and regular BCs. This hose is perfect as a spare, especially for brands like:OMS, Halcyon, Dive Rite, xDEEP, IST, Hollis… and more brands…. Choose your size: Option 1: 32,5cm (13") Option 2: 40cm (16") Option 3: 48cm (19") Add to cart
Fuera de Stock Ask us about availability Tools and grease Digital IP Gauge NANIP 72.00 € The Inter-stage pressure checker is precision instrument in a tough housing for everyday use. Perfect for rebreather divers and technical divers to check their inter-stage pressure with a higher degree of accuracy. It is available with a calibration certificate if required. Add to cart
En Stock Available Spare parts Double Gasket A11918020 3.90 € This is the gasket that goes between the male and female pieces that serve as seats for the overpressure valves and wing elbows. Measures: Outer diameter: 50mm Inner diameter: 25mm Add to cart
En Stock Available Meg Dust Caps 9/16" NAN0003 29.00 € These dust caps are made to fit any standard 2nd stage hose and reg fitting.One use is to cap the oxygen solenoid and hose of your rebreather or cap the ends of the ADV hoseIt fits the kiss BOV, or can be used simply to protect and keep hoses clean.ALSO FITS ANY STANDARD 9/16 REGULATOR FITTINGThey come as a set 1 male and 1 female (one for the hose and... Add to cart
En Stock Available Spare parts Elbow Assembly with OVP with cable 34.90 € Elbow Assembly with OVP with cable suitable. There are 3 lengths options for the cable: 33cm 40cm 48cm Add to cart
En Stock Available Spare parts Elbow O-Ring 0.90 € Replacement O-ring for the trachea elbow. OPTION 1: Wings manufactured after 2015. (Dimensions: outside 38mmø, inside 25mmø and 3.8mm thick) OPTION 2: Wings manufactured before 2015 and also for Halcyon, Dive Rite, IST, Xdeep, Hollis, EDGE, HOG ... (Dimensions: Outside 38mmø, Inside 25mmø, and 3mm thick) Choose the appropriate one you need from the... Add to cart
En Stock Available Spare parts Elbow OMS (newest version, universal) A11918023 5.70 € The newly designed OMS elbow can be used in any wing of the most common such as, obviously, all OMS, halcyon, Edge, Xdeep, Dive Rite, etc ... if you have any questions, ask us. To this new design has been added a very marked stretch mark, in this way the trachea is much more secured once installed and even losing the flange it is highly unlikely that the... Add to cart
En Stock Available Spare parts Inner coupling A11918021 4.69 € Male piece that goes inside the wing, which serves to anchor both the elbow system and the exhaust / drain valve. Add to cart
En Stock On sale! Available SPARE PARTS Nordic Blue O-Ring kit (pair) A20916815 7.01 € This spare part is for this product LINK Add to cart
En Stock Available NORDIC BLUE Nordic Blue rings base A20916814 26.00 € Nordic Blue base rings. Link to the complete product description Add to cart
En Stock New Last items in stock NORDIC BLUE Nordic Blue wrist seal (OMS) (unit) A20916811-legacy 21.00 € Nordic Blue wrist seal spare part Link to the product Add to cart
En Stock Available NORDIC BLUE Nordic Blue wrist seals (OMS) (Pair) A20916811 40.99 € Nordic Blue wrist seal spare part (pair) Link to the product Add to cart
En Stock Available Hardware things... OMS D-Ring 1" (~25 mm) stainless Steel , straight A11910208 2.40 € Add to cart
Fuera de Stock Ask us about availability Spare parts OMS Peformance Internal Bladder Mono wings 69.70 € Inner blade for wings manufactured after 2015 Choose the one you need from the dropdown menu Add to cart
En Stock Available Hardware things... OMS 2 in (5 cm) Stainless Steel D-Ring, ~ 45° bend A24510206 4.40 € Add to cart
En Stock Available Hardware things... OMS 2 in (~5 cm) Stainless Steel D-Ring A11910209 4.40 € Add to cart
En Stock Available Hardware things... OMS Book screw 1/4" 4.40 € Screw (one unit) for mounting the wing with the backplate, Argon system, weight pockets, or,... etc... The screw is provided with an O-ring at the base in order, on the one hand, to prevent it from slipping and loosening and, on the other, to avoid direct pressure of the metal against the fixed part. 1/4" screw thread, available in 3 sizes: 12mm 18mm... Add to cart
En Stock Available Spare parts OMS Complete Elbow Assembly + 2015 A11918016 11.99 € To use on wings manufactured after 2015 Add to cart
Fuera de Stock Ask us about availability Spare parts OMS complete wing inflator kit 82.50 € Completed airway (to use with OMS wings manufactured after 2015): elbow, corrugated hose , inflator and gasket 13", 16" oder 19" Länge Add to cart
En Stock Available Spare parts OMS Donut Shape Internal Bladder (32 lb.) A11918038 64.20 € Inner bladder to use as spare part with OMS Performance mono wings manufactured before 2015 Add to cart
En Stock Available inicio OMS Elbow collar + 2015 A11918025-new 4.99 € Elbow retainer collar thread for OMS wings manufactured after 2015 (wider threads) Add to cart
En Stock Available Spare parts OMS Elbow collar/cap A11918025 5.90 € Elbow collar/cap to use with OMS wings manufactured before 2015. It also works with many other different wings brands, like: Halcyon, Dive Rite, IST, Hollis, HOG, EDGE, etc... Add to cart
En Stock Available Accessories OMS Grip Pad A16918005 2.50 € OMS Grip pad for insertion in the tank-holder straps, Made of soft rubber, the tank does not slip and stay firm.Suitable for all tanks neck straps 5cm (2 ") wide. Add to cart
En Stock Available Accessories & spare parts OMS Mask buckles (pair) with 2 pins A12118017 9.90 € Add to cart
Fuera de Stock Ask us about availability OMS OMS Neck Seal (glueable) A20918042 89.00 € New glueable Silicone Seals!!! Add to cart
En Stock Available Spare parts OMS OPV cap A11918030 3.90 € Over pressure valve cap to use with OMS wings manufactured before 2015. It also works with many other different wings brands, like: Halcyon, Dive Rite, IST, Hollis, HOG, EDGE, etc... Add to cart
En Stock Available Spare parts OMS Over pressure valve A11918017 16.00 € This spare part is only able to use in OMS wings manufactured after 2015 Add to cart
Fuera de Stock New Ask us about availability pee-valve, condoms, quick connec OMS P-Valve Cap 3 Pins installed, O-Ring and conical spring 11.89 € OMS Pee-Valve Outer Cap This is the complete cap that including: Cap Pins Spring Board Available in three finishes: Item nº1: WITHOUT Logo Item nº2: With OMS Logo Item nº3: With DUI Logo Add to cart
Fuera de Stock New On Demand pee-valve, condoms, quick connec OMS P-Valve Raw Spare Parts 8.91 € Spare parts for the Pee-Valve OMS. Look carefully at the diagram and choose the part according to its numbering in the drop-down menu 1: Valve body 2: Duckbill check valve 3: Washer (duckbill check valve) Nylon FG black 4: Protection valve 5: Male thread pipe fitting barb hose tail connector with O-ring 6: Neoprene Tube A-60-G 7: Double hose connector 8:... Add to cart
Fuera de Stock New Ask us about availability pee-valve, condoms, quick connec OMS P-Valve repair and Spare part kit A20918035 16.90 € Spare parts and repair kit for OMS P-valve. The kit is composed of: Main valve body Washer (duckbill non-return valve) Nylon FG black O-Rings Umbrella Valve Umbrela valve seat Valve seat O-Ring Add to cart
En Stock Available Spare parts OMS Peformance Internal Bladder Double 74.71 € Inner blade for wings manufactured after 2015 Choose the one you need from the dropdown menu Add to cart
En Stock Available NORDIC BLUE OMS Silicon Wrist Seals For Ring System (Nordic Blue) (pair) A20918041 79.00 € Silicone sleeve with a resistance much higher than the standard in other silicone sleeves availables on the market, suitable for mounting on the Nordic Blue or Ring Systems sleeve systems, from BtS-OMS Add to cart
En Stock Available inicio OMS Square ring Aluminum A24518008 4.50 € Rectangular aluminum ring used in OMS Smartstream harnesses, it´s also useful for many other tasks. Its dimensions: Inside: 55mm x 12mm Thread diameter: 5mm Weight: 7gr Add to cart
En Stock Available Spare parts OMS® Complete Over Pressure valve a11918026 16.00 € Complete overpressure valve (except the male part inside the bladder, not included) for OMS® wings manufactured before 2015.This valve is the universal type one, are also valid / suitable for and are suitable for a multitude of brands such as Halcyon, EDGE, Dive Rite, Xdeep, etc ... get in touch with us is you could have any doubt about compatibility.... Add to cart
Fuera de Stock New Ask us about availability OMS OMS® Silicone Seals (glue able inside) 129.00 € New glueable Silicone Seals!!! Add to cart
En Stock Available OMS OMS® Silicone Seals (glue able outside) 129.00 € New glueable Silicone Seals!!! Add to cart
En Stock Available Spare parts OPV retainer A11918028 1.10 € Over pressure seat retainer to use with OMS wings manufactured before 2015. It also works with many other different wings brands, like: Halcyon, Dive Rite, IST, Hollis, HOG, EDGE, etc.. Add to cart
En Stock Available Spare parts OPV Seat A11918027 1.60 € The OMS O-Ring (to use with OMS wings manufactured before 2015) is for use in the over pressure valve of the wings, however, its also works with these other brands: Halcyon, Dive Rite, IST, Xdeep, Hollis, EDGE, HOG... Add to cart
En Stock Available Spare parts OPV valves spring type 1 A11918029 0.61 € This is the spring which is located at the over pressure valves and elbow of the wings This spring has the same diameter at both sides, up and down, 24mm Add to cart
En Stock Available Spare parts OPV valves spring type 2 legacy parts 0.60 € This is the spring which is located at the over pressure valves and elbow of the wings This spring is asymmetric, one side has 22mm of diameter and the other one 17mm of diameter Add to cart
En Stock Available Spare parts Rubber O-ring to fix the inflator hose A11918012 5.00 € Rubber O-ring to fix the inflator on left chest D-ring Add to cart
En Stock Available Spare parts Rubber ring for harness and D-Ring A11918092 4.01 € Rubber Ring with 8,0 mmø section, 50mm outer diameter and 85mm inner diameter.This ring is used in OMS wing equipment to keep the D-Rings of the pockets in a 90º position. It is also used in harnesses to stop different elements that we have mounted. Add to cart
En Stock Available Accessories & spare parts S.S. Pin for Tattoo and Tribe mask 2pc A12118018 1.99 € Add to cart
En Stock New Available Spare parts Scubapro 2nd stage Diaphragm 10.29 € Diaphragm for Scubapro second stages. Choose the necessary option from the drop-down menu following the relationship in the following list: Option 1: S600, S550, G500, R390, R380, R290, S270 Option 2: A700 Option 3: D420 (3 pieces: diaphragm, disc and disc insert) Option 4: R195, G260 Option 5: R295, R395, R095 Option 6: G250, R190 Option 7: X650,... Add to cart
Fuera de Stock -20% Ask us about availability inicio Scubapro A1 and A2 Metal Strap 05.064.015 188.00 € 235.01 € Add to cart
Fuera de Stock -20% Ask us about availability inicio Scubapro A1 and A2 Nato Strap 05.064.020 52.80 € 66.01 € Add to cart
En Stock -18% Available inicio Scubapro Aladin A1-A2 Silicone Wrist Strap Correa A1-A2 54.12 € 66.01 € NOTE: The price is for the strap, the computer is not included Add to cart
Fuera de Stock New Ask us about availability Spare Parts & Accessories Scubapro BPI Prior 2013 Spare Parts 2.42 € Spare parts for the Scubapro end inflator control (BPI), model prior to 2013 Study the diagram carefully and choose the necessary parts according to the numbered relationship, also explained in the list below. Please note that spare parts are NOT returnable. 1: 65cm hose (go to this link to get this part) 2: O-Ring 3: NOT AVAILABLE 4: Retaining ball... Add to cart
En Stock Available Spare Parts & Accessories Scubapro BPI Quick Connect 21.626.013 28.00 € Add to cart
Fuera de Stock Ask us about availability inicio Scubapro Buckle Protectors 24.105.000 10.50 € The sleeve slides over the quick-adjust buckle, protecting it from bumps from transport and flying debris. NOTE: The mask visible in the photo IS NOT INCLUDED Add to cart
Fuera de Stock New Ask us about availability Spare parts Scubapro Cover Plastic R105 11.332.036 15.73 € Add to cart
Fuera de Stock New Ask us about availability Spare Parts & Accessories Scubapro Elbow and OPV for jackets 3.39 € Replacement elbows and OPV-drain valves for Scubapro jackets. Spare parts are common for almost all jacket models, with only a few exceptions. If you have any questions about compatibility with your model, please contact us before placing your order. Choose the necessary spare part from the drop-down menu according to the numbering in the diagram. Part... Add to cart
En Stock New Available Scubapro wings spare parts Scubapro Ergo Nut Set 22.247.101 13.55 € Housings for the backplate-wing fastening handles of the Scubapro wing kits Add to cart
En Stock New Available Spare parts Scubapro Exhaust Valve for 2nd stages type A, S, R, C 11.250.103P 7.74 € Exhaustion Tee for the second stages: A700 all models S600 all models S620 all models G250 all models G260 all models C370 R195 all models R105 all models R095 all models Add to cart
Fuera de Stock Ask us about availability inicio Scubapro G2 and Aladin Square Strap 06.204.468 18.79 € Add to cart
Fuera de Stock New Ask us about availability Spare parts Scubapro G250V 2nd stage Cover 11.261.020 26.62 € Add to cart
En Stock New Available Spare parts Scubapro G250V 2nd stage exhaust cover 11.261.024 10.89 € Add to cart
En Stock New Available Accessories-spare parts Scubapro Go Sport Skegs 6.70 € These skegs work to minimize sideslip and maximize stability when kicking and maneuvering in the water. Fins come standard with either silver or black skegs. However, optional skegs are available in a variety of colors for customization or to color-code sizing. These skegs works with the Seawing Supernova and Go Sport fins Supplied in packs of 4 units Add to cart
En Stock Available inicio Scubapro INT to DIN Conversion Kit, Universal 10.045.030 59.99 € Conversion Kit Universal (MK10, MK14, MK16, MK17, MK18, MK20, MK25) This adapter allows you to easily convert your first stage, if required, so you can use your own gear rather than rental gear! Add to cart
En Stock Available inicio Scubapro Mask Strap with velcro 24.700.010 11.00 € Enjoy your dives wearing a mask decked out with a neoprene hook & loop strap. These straps are easy to use and ultra-comfortable. Makes quick and easy work of donning your mask, even when wearing gloves. Replaces silicone strap. Attached with hook & loop straps to your mask buckles. Add to cart
En Stock New Available Tools and grease Scubapro Nut Socket Tool 43.191.107 61.71 € 25mm hexagonal wrench especially indicated for removing the YOKE connection nut of all Scubapro regulators. It is also valid for Cressi YOKE regulators 6mm Allen connection for the driver stud Add to cart
En Stock Available inicio Scubapro O-Ring Kit for BPI Inflator End 21.626.045 18.00 € O-Ring kit for Scubapro Tek-BPI Inflator System (Tek, Balance and more...) Add to cart
Fuera de Stock Ask us about availability inicio Scubapro Regulator Repair Tool 43.040.000 87.12 € This professional emergency tool performs 13 different functions for Scubapro regulators. The handle protects your hand from pins, when this section of the tool is not used. Made of high impact machined plastic with just about everything you will need to remove a first stage plug, tighten a low pressure hose to a regulator, loosen a BCD hose and much... Add to cart
Fuera de Stock New Ask us about availability Accessories-spare parts Scubapro Seawing Nova Buckle Body 25.712.002 7.00 € Add to cart
Fuera de Stock New Ask us about availability Accessories-spare parts Scubapro Seawing Nova Buckle Body Cover 25.712.001 7.00 € Add to cart
Fuera de Stock New Ask us about availability Accessories-spare parts Scubapro Seawing Nova Bungee Cord 7.41 € 4 lengths available S: 245mm M: 255mm L: 265mm XL: 275mm Add to cart
Fuera de Stock New Ask us about availability Accessories-spare parts Scubapro Seawing Nova Complete Fin Strap 49.01 € Add to cart
Fuera de Stock New Ask us about availability Accessories-spare parts Scubapro Seawing straps (pair) 25.557.001 31.00 € Replaceable self-adjusting bungee heel straps for Seawing and Seawing Supernova fins allow for a versatile fit and make these high-performing fins easy to don and doff. Features: New heavy-duty bungee for added durability. Adjustable strap position with 3 options to find the perfect fit. Sold as a pair. Available in Midi size only. Add to cart
En Stock New Available Accessories-spare parts Scubapro Seawing Supernova lock plate set (pair) 25.558.001 8.40 € Lock plate set includes 2 right and 2 left lock plates for assembling your Seawing Supernova. Add to cart
En Stock New Available Accessories-spare parts Scubapro Seawing Supernova Tool 25.550.001 11.80 € Included with every pair of Seawing Supernova Fins, this key-fob style multi-purpose tool is all you need to easily assemble and disassemble your Supernovas. Smart lever (screwdriver tip) easily removes lock plates from fins. Molded in reinforced plastic. Blue colour for visibility in your dive bag. Fin strap buckle adjustment: pin pusher & puller... Add to cart
En Stock Available inicio Scubapro Smart Tec-Tec-Prime-One-Digital 330... Strap 06.201.851 18.79 € Strap for Scubapro models: Smart Tec, Z, Pro, Aladin Tec, 2G, Prime, One, Digital 330 pre. 2013 Add to cart
Fuera de Stock Ask us about availability inicio Scubapro Strap ASSY for 2G, One, Sport, 3G, Digital 330, XP10, XP3G, Prime 06.204.268 18.79 € Add to cart
Fuera de Stock Ask us about availability inicio Scubapro Strap for 2G, One, Sport, 3G, Digital 330, XP10, XP3G, Prime 06.204.269 18.79 € Add to cart
Fuera de Stock Ask us about availability inicio Scubapro Strap for Galileo Sol, Luna, Terra 06.203.027 34.00 € Add to cart
En Stock New Available Spare parts Scubapro YOKE Adjustment screw 27.39 € Adjustment screw for the YOKE connections of the Scubapro 1st stages. Choose the right one for your model from the list below: Item nº1: Mk2, Mk11, Mk17, Mk21, Mk25 Item nº2: Mk16, Mk18 Item nº3: Mk19 NOTE: the thread size are common for all models, being able to use any of them with all Scubapro models Add to cart
En Stock New Available Tools and grease Scubapro YOKE Extractor Drive Tool 43.040.009 32.67 € Necessary tool to operate the YOKE core extractor tool through the YOKE termination hole of the Scubapro regulators. Suitable for use with Cressi regulators. 6mm Allen male stud for connection to extractor wrench and 12.5mm female universal connection for ratchet wrenches. Add to cart
En Stock Available Spare parts Scubapro, Silicone valve seat 11.250.221 3.99 € Silicone valve seat for Scubapro 2nd stage Add to cart
En Stock Available Spare parts Seal Ring A11918019 5.90 € Sel Ring for OMS wing manufactured before 2015. Also fits in: Halcyon, IST, Hollis, Dive Rite, etc... if you have any doubt regarding the adaptability, please, contact us. Add to cart