En Stock -15% Available Hardware things... IQ Lite screw (Nylon) 6 pieces A11918074 7.65 € 9.00 € Add to cart
Fuera de Stock Out-of-Stock inicio 2nd stage Elbow J.Dive-elbow1 59.99 € Very high quality swivel elbow made of steel, to be mounted on the inlet hose of the 2nd stage of the regulator. Standard connections 9/16" male-female View
Fuera de Stock -20% Out-of-Stock REGULATOR ACCESORIES 2nd Stage Elbow Swivel J.Dive-elbow4 35.60 € 44.50 € Second Stage Elbow Swivel9/16" - 18 male to 9/16" FemaleCaptured O Rings for safer swivel View
En Stock Available J.Dive Systems Aluminium single tank adapter STA 35.01 € Adapter for Single Tank in Alu-minium Measures: 33cm x 8,8cm Weight: more or less, 210gr. Add to cart
Fuera de Stock New Out-of-Stock STEEL HARDWARE Belt stop serrated Stainless Steel 316L 80125 1.57 € Serrated stainless-steel stopper for 50 mm (2") strap. View
En Stock -15% Available 24-48h Hardware things... Book screw tool A11918097 1.61 € 1.90 € Specific tool to facilitate the screwing-unscrewing operation of the Book screw set for backpad, backplate, argon systems, etc It is sold individually but two pieces are recommended to facilitate the work Link to the Screw set Add to cart
En Stock -15% Available Pressure Gauge Boot for 52 and 63mm Gauges 9.66 € 11.36 € Looking for protective boots, this is what you're looking for. The boots are made from a high quality thermoplastic for extended life, impact resistant to keeps your gauges safe and this console boot has a sleek low profile. These protectors are intended to house metal gauges, both 52mm and 63mm. Choose the required option from the drop-down menu. Option... Add to cart
En Stock -15% Available CONTROL INSTRUMENTS Boot for stage Gauges A14118008 9.66 € 11.36 € Looking for protective boots, this is what you're looking for. The boots are made from a high quality thermoplastic for extended life, impact resistant to keeps your gauges safe and this console boot has a sleek low profile. NOTE: the pressure gauge that can be seen in the photo IS NOT INCLUDED in the price Add to cart
En Stock Last items in stock inicio Breathing hoses ballast (pair) (pre owned) Jdive00BH 59.99 € Weight rings for JJ-CCR breathing hoses. The rings are made of stainless steel and have exceptional finishes, which also fit perfectly into the JJ-CCR breathimngs hoses Specs:: Weigh 300gr/unit Inner: 36mm Outer: 56mm Width: 25mm NOTE: this product is used. It presents slight signs of wear that in some areas reveal the interior brass, nothing that could... Add to cart
En Stock Available BUNGEE MOUNTS/COMPASS BUNGEE in 4, 5, 6 and 8mm 1.36 € Price per meter Add to cart
En Stock Available inicio Canister fixing system jdive0032 21.90 € The system is provided with a strap with a stainless steel eyelet and screws to attach it to the backplate and the additional stainless steel buckle. Add to cart
En Stock Available Accesories / Weight Cobra weight Belt jdive0025 29.00 € Ballast belt mounted with the Cobra GT closure of Scuba Force and a soft strap to be able to mount and disassemble the leads in seconds and also be able to easily tighten and loosen the belt. NOTE: the leads are not included Add to cart
En Stock Available J.Dive Flex HQ copy of J.Dive Flex HQ hose, LP Regulator Orange 17.64 € J.Dive Flex HQ regulator hoses We incorporate this new braid which offers better qualities in terms of elasticity.The J.Dive Flex hoses are assembled in our facilities following the most stringent quality controls. When assembling them ourselves, we are able offering hoses to any size you need, being able to select the measure that is really... Add to cart
En Stock -15% Available inicio Cover for Book Screw nut flat A11818019 0.85 € 1.00 € Rubber cover for Book Screw nut flat 1/4" Link to the Book Screw nut NOTE: The price corresponds only to the rubber cover, the visible nut in the photo is for illustrative purposes Add to cart
Fuera de Stock -10% Out-of-Stock OMS DIR HARNESS + SS BACKPLATE, OMS A11518034 224.11 € 249.01 € View
En Stock Available CHARGERS/BATTERIES Doble charger for 18650 Li-ion batteries 2x1850-charge 12.50 € Add to cart
Fuera de Stock Out-of-Stock REGULATOR ACCESORIES Elbow 3/8" J.Dive-elbow2 29.99 € Rotating elbow for connection to the first stage, male / female connections 3/8 "The elbow rotates and can be oriented where needed, rotates 360º View
En Stock Last items in stock REGULATOR ACCESORIES Extender for 3/8" connections 19.99 € 3/8" connection extender in two length options, 16 and 24mm (not counting the thread) Standard 3/8" connections. NOTE: the photo shows the 2 length options. The price includes only one unit. Add to cart
Fuera de Stock -15% Out-of-Stock Spare parts Halcyon OEM Power inflator 14060102 36.00 € 42.35 € Halcyon 45º inflator end. Fits most BCDs on the market that require a 1in inner diameter corrugated hose. Also has a steel pin for BCDs that use a pull to dump feature. Sleek streamlined design replacement power inflator for your BC compatible with most 1″ corrugated hoses View
Fuera de Stock -10% Ask us about availability Harness & Backplates HARNESS + ALU BACKPLATE OMS A11518033 233.10 € 259.00 € Add to cart
En Stock Available Computers Spare parts HP Hose for wireless transmiter jdivehptrans 25.00 € HP phose with nipple included for Suunto, Mares, Aqualung and Shearwater wireless transmitters The use of the nipple (included together with the hose.) is essential for its correct operation NOTE: It is recommended not to manipulate high pressure equipment if you do not have minimal knowledge. Contact us if you have any questions about it for a correct... Add to cart
En Stock Available Tools and grease Inflator valve tool (medium model) jdive0026 3.99 € This product is a tool for the removal and adjustment of the schrader valve within our inflator hoses. This assists in allowing you to remove and replace them as required during servicing. This is a useful tool for the experienced diver and service engineer; a simple and small tool engineered in metal for durability.Total tool length: 90mmHandle Length: 65mm Add to cart