En Stock Last items in stock SI TECH ANTARES Glove Ring. 60261 12.10 € ANTARES Glove Ring. Add to cart
En Stock Available SI TECH ANTARES Spanner Rings 6.90 € The two diffrent Spanner Rings allows a variety of gloves to be used. Blue Spanner Ring for thin gloves and green Spanner Ring for thick gloves. Item nº:60263 (Blue) Item nº: 60264 (Green) Add to cart
En Stock Available SI TECH Aros fijadores para sistemas Quick Glove 3.63 € Black: de 1,5mm thick, to use with thick gloves (ref. 60211) Amarillo: 2,0mm thick, to use with medium-thick gloves (ref. 60214) Azul: 2,4mm thick, to use with medium-thin gloves (ref. 60212) Verde: 2,6mm thick, to use with thin gloves (ref. 60219) Add to cart
En Stock Available inflation and exhaust valves Blanking plug for SI TECH Valves 17.45 € Blanking plug for SI TECH Pee Valve, Inflation and Exhaust Valves. Item no: 60340 Large guide ridge Item no: 60335 Small guide ridge Add to cart
Fuera de Stock Ask us about availability SI TECH Blue PVC Glove - Extended cuff 57.00 € A seamless glove made of PVC and latex, with a straight seal. Suitable for Dry Glove Systems where the glove is pulled over the ring. A durable and cost effective Dry Glove. Easy to use. These gloves make diving both comfortable and warm, and therefore makes it possible to keep the dexterity in the hands much better. These gloves comes with a separate... Add to cart
En Stock Available Accessories BtS Grip Pad 2.50 € OMS Grip pad for insertion in the tank-holder straps, Made of soft rubber, the tank does not slip and stay firm.Suitable for all tanks neck straps 5cm (2 ") wide. NOTE: The photo in gray shows the OMS logo, however, the correct logo is the BtS one. Add to cart
En Stock -15% Available SI TECH Clips set for ORUST Neck System 60179 14.89 € 17.52 € Sitech® ORUTS Modular Neck System Clips Available as a complete pack of 12 units or individually. Choose the required option from the drop-down menu. Add to cart
En Stock -15% Available SI TECH Clips set for SLÄGGÖ Flex Ring 60714 19.60 € 23.06 € Sitech® SLAGGO modular System Clips Available as a complete pack of 6 units or individually. Choose the required option from the drop-down menu. Add to cart
En Stock Available Spare parts Complete elbow assembly A11918022 23.99 € Complete elbow kit for OMS wings manufactured before 2015, Halcyon manufactured before 2018 and many other brands such as Xdeep, Dive Rite, Hollis, Tecline, Hog, EDGE ... Ask us if you have any questions-doubts about compatibility with your wing gear Add to cart
En Stock Available Spare parts Corrugated universal hose (OMS) 20.30 € This corrugated hose is used to connect the BC to the power inflator. These standard corrugated hoses are compatible with both wings and regular BCs. This hose is perfect as a spare, especially for brands like:OMS, Halcyon, Dive Rite, xDEEP, IST, Hollis… and more brands…. Choose your size: Option 1: 32,5cm (13") Option 2: 40cm (16") Option 3: 48cm (19") Add to cart
En Stock Available Spare parts Double Gasket A11918020 3.90 € This is the gasket that goes between the male and female pieces that serve as seats for the overpressure valves and wing elbows. Measures: Outer diameter: 50mm Inner diameter: 25mm Add to cart
En Stock Available Spare parts Elbow Assembly with OVP with cable 34.90 € Elbow Assembly with OVP with cable suitable. There are 3 lengths options for the cable: 33cm 40cm 48cm Add to cart
En Stock Available Spare parts Elbow O-Ring 0.90 € Replacement O-ring for the trachea elbow. OPTION 1: Wings manufactured after 2015. (Dimensions: outside 38mmø, inside 25mmø and 3.8mm thick) OPTION 2: Wings manufactured before 2015 and also for Halcyon, Dive Rite, IST, Xdeep, Hollis, EDGE, HOG ... (Dimensions: Outside 38mmø, Inside 25mmø, and 3mm thick) Choose the appropriate one you need from the... Add to cart
En Stock Available Spare parts Elbow OMS (newest version, universal) A11918023 5.70 € The newly designed OMS elbow can be used in any wing of the most common such as, obviously, all OMS, halcyon, Edge, Xdeep, Dive Rite, etc ... if you have any questions, ask us. To this new design has been added a very marked stretch mark, in this way the trachea is much more secured once installed and even losing the flange it is highly unlikely that the... Add to cart
En Stock Available Spare parts Inner coupling A11918021 4.69 € Male piece that goes inside the wing, which serves to anchor both the elbow system and the exhaust / drain valve. Add to cart
Fuera de Stock -30% Product available with different options Kevlar hoses Kevlar HP hose 30.49 € 43.56 € Kevlar HP hose Kevlar High pressure Available in various lengths (from 10-150 cm) View
En Stock Available SI TECH Latex Neck Seal - for Neck Tite 22.80 € Latex Neck Seal with bellow shape. Sligthly tapered. Guide ribs for easy trimming. Designed to be used with the Neck Tite system. Available in three sizes: Small, Medium and Large. Add to cart
En Stock Available SI TECH Latex Wrist Seal - Tapered 10.73 € Latex Wrist Seal with tapered (conical) shape. Available in three models that differ in thickness but share the same measurements See the specifications below or in the product photo itself Choose the required model according to Option 1, 2 or 3 from the drop-down menu Add to cart
En Stock Available SI TECH Latex Wrist Seal - Tapered (ext length) 12.00 € Latex Wrist Seal with tapered (conical) shape extra length. Available in 2 models that differ in thickness but share the same measurements See the specifications below or in the product photo itself Choose the required model according to Option 1 or 2 from the drop-down menu Add to cart
En Stock Available SI TECH Latex Wrist Seal round extra thick 61225 13.24 € Latex cuff with extra thick round shape, specially indicated for users who carry out dives in more hostile environments.Latex seals are the most used seals on the market today, they are characterized by offering greater resistance compared to silicone seals, but their useful life is shorter since they are degraded by ultraviolet light, ozone or the... Add to cart
En Stock Available SI TECH Latex Wrist Seal round shape 61230 12.46 € Standard thickness round shaped latex sleeve.Latex seals are the most used seals on the market today, they are characterized by offering greater resistance compared to silicone seals, but their useful life is shorter since they are degraded by ultraviolet light, ozone or the chemical products.Note! the price is for one unit. Add to cart
En Stock Available SI TECH Lock Ring for the Quick Neck and/or Neck Tite system. 60172 9.76 € Lock Ring for the Quick Neck and/or Neck Tite system. Add to cart
Fuera de Stock Ask us about availability SI TECH Neck Tite Sitech 73.00 € A torn neck seal can cost you the dive of your life. The Neck Tite is a modular seal/quick change system that will prevent things like that to happen. The Neck Tite system is revolutionary in simplicity, comfort and function. It ables the user to change a torn or broken seal within minutes by the use of one single tool. The Neck Tite system will save... Add to cart
En Stock On sale! Available SPARE PARTS Nordic Blue O-Ring kit (pair) A20916815 7.01 € This spare part is for this product LINK Add to cart
En Stock Available NORDIC BLUE Nordic Blue rings base A20916814 26.00 € Nordic Blue base rings. Link to the complete product description Add to cart
En Stock New Last items in stock NORDIC BLUE Nordic Blue wrist seal (OMS) (unit) A20916811-legacy 21.00 € Nordic Blue wrist seal spare part Link to the product Add to cart
En Stock Available NORDIC BLUE Nordic Blue wrist seals (OMS) (Pair) A20916811 40.99 € Nordic Blue wrist seal spare part (pair) Link to the product Add to cart
En Stock Available SI TECH O-rings for Sitech® Dry Glove systems 3.99 € O-rings for ANTARES, Glove QCP and Quick Glove Dry Glove System.Item no: 80173For ANTARES Dry Glove systemBlackNitrile Item no: 82038For ANTARES Dry Glove systemRedSiliconeItem no: 80197For Glove Lock QCP Dry Glove systemBlackNitrile Item no: 80185For Quick Glove Dry Glove systemBlackNitrile Add to cart
En Stock Available Hardware things... OMS D-Ring 1" (~25 mm) stainless Steel , straight A11910208 2.40 € Add to cart
Fuera de Stock Ask us about availability Spare parts OMS Peformance Internal Bladder Mono wings 69.70 € Inner blade for wings manufactured after 2015 Choose the one you need from the dropdown menu Add to cart
En Stock Available Hardware things... OMS 2 in (5 cm) Stainless Steel D-Ring, ~ 45° bend A24510206 4.40 € Add to cart
En Stock Available Hardware things... OMS 2 in (~5 cm) Stainless Steel D-Ring A11910209 4.40 € Add to cart
En Stock Available Hardware things... OMS Book screw 1/4" 4.40 € Screw (one unit) for mounting the wing with the backplate, Argon system, weight pockets, or,... etc... The screw is provided with an O-ring at the base in order, on the one hand, to prevent it from slipping and loosening and, on the other, to avoid direct pressure of the metal against the fixed part. 1/4" screw thread, available in 3 sizes: 12mm 18mm... Add to cart
En Stock Available Spare parts OMS Complete Elbow Assembly + 2015 A11918016 11.99 € To use on wings manufactured after 2015 Add to cart
Fuera de Stock Ask us about availability Spare parts OMS complete wing inflator kit 82.50 € Completed airway (to use with OMS wings manufactured after 2015): elbow, corrugated hose , inflator and gasket 13", 16" oder 19" Länge Add to cart
En Stock Available Spare parts OMS Donut Shape Internal Bladder (32 lb.) A11918038 64.20 € Inner bladder to use as spare part with OMS Performance mono wings manufactured before 2015 Add to cart
En Stock Available inicio OMS Elbow collar + 2015 A11918025-new 4.99 € Elbow retainer collar thread for OMS wings manufactured after 2015 (wider threads) Add to cart
En Stock Available Spare parts OMS Elbow collar/cap A11918025 5.90 € Elbow collar/cap to use with OMS wings manufactured before 2015. It also works with many other different wings brands, like: Halcyon, Dive Rite, IST, Hollis, HOG, EDGE, etc... Add to cart
En Stock Available Accessories OMS Grip Pad A16918005 2.50 € OMS Grip pad for insertion in the tank-holder straps, Made of soft rubber, the tank does not slip and stay firm.Suitable for all tanks neck straps 5cm (2 ") wide. Add to cart
En Stock Available Accessories & spare parts OMS Mask buckles (pair) with 2 pins A12118017 9.90 € Add to cart
Fuera de Stock Ask us about availability OMS OMS Neck Seal (glueable) A20918042 89.00 € New glueable Silicone Seals!!! Add to cart
En Stock Available Spare parts OMS OPV cap A11918030 3.90 € Over pressure valve cap to use with OMS wings manufactured before 2015. It also works with many other different wings brands, like: Halcyon, Dive Rite, IST, Hollis, HOG, EDGE, etc... Add to cart
En Stock Available Spare parts OMS Over pressure valve A11918017 16.00 € This spare part is only able to use in OMS wings manufactured after 2015 Add to cart
Fuera de Stock New Ask us about availability pee-valve, condoms, quick connec OMS P-Valve Cap 3 Pins installed, O-Ring and conical spring 11.89 € OMS Pee-Valve Outer Cap This is the complete cap that including: Cap Pins Spring Board Available in three finishes: Item nº1: WITHOUT Logo Item nº2: With OMS Logo Item nº3: With DUI Logo Add to cart
Fuera de Stock New On Demand pee-valve, condoms, quick connec OMS P-Valve Raw Spare Parts 8.91 € Spare parts for the Pee-Valve OMS. Look carefully at the diagram and choose the part according to its numbering in the drop-down menu 1: Valve body 2: Duckbill check valve 3: Washer (duckbill check valve) Nylon FG black 4: Protection valve 5: Male thread pipe fitting barb hose tail connector with O-ring 6: Neoprene Tube A-60-G 7: Double hose connector 8:... Add to cart
Fuera de Stock New Ask us about availability pee-valve, condoms, quick connec OMS P-Valve repair and Spare part kit A20918035 16.90 € Spare parts and repair kit for OMS P-valve. The kit is composed of: Main valve body Washer (duckbill non-return valve) Nylon FG black O-Rings Umbrella Valve Umbrela valve seat Valve seat O-Ring Add to cart
En Stock Available Spare parts OMS Peformance Internal Bladder Double 74.71 € Inner blade for wings manufactured after 2015 Choose the one you need from the dropdown menu Add to cart
En Stock Available NORDIC BLUE OMS Silicon Wrist Seals For Ring System (Nordic Blue) (pair) A20918041 79.00 € Silicone sleeve with a resistance much higher than the standard in other silicone sleeves availables on the market, suitable for mounting on the Nordic Blue or Ring Systems sleeve systems, from BtS-OMS Add to cart
En Stock Available inicio OMS Square ring Aluminum A24518008 4.50 € Rectangular aluminum ring used in OMS Smartstream harnesses, it´s also useful for many other tasks. Its dimensions: Inside: 55mm x 12mm Thread diameter: 5mm Weight: 7gr Add to cart
En Stock Available Spare parts OMS® Complete Over Pressure valve a11918026 16.00 € Complete overpressure valve (except the male part inside the bladder, not included) for OMS® wings manufactured before 2015.This valve is the universal type one, are also valid / suitable for and are suitable for a multitude of brands such as Halcyon, EDGE, Dive Rite, Xdeep, etc ... get in touch with us is you could have any doubt about compatibility.... Add to cart
Fuera de Stock New Ask us about availability OMS OMS® Silicone Seals (glue able inside) 129.00 € New glueable Silicone Seals!!! Add to cart
En Stock Available OMS OMS® Silicone Seals (glue able outside) 129.00 € New glueable Silicone Seals!!! Add to cart
En Stock Available Spare parts OPV retainer A11918028 1.10 € Over pressure seat retainer to use with OMS wings manufactured before 2015. It also works with many other different wings brands, like: Halcyon, Dive Rite, IST, Hollis, HOG, EDGE, etc.. Add to cart
En Stock Available Spare parts OPV Seat A11918027 1.60 € The OMS O-Ring (to use with OMS wings manufactured before 2015) is for use in the over pressure valve of the wings, however, its also works with these other brands: Halcyon, Dive Rite, IST, Xdeep, Hollis, EDGE, HOG... Add to cart
En Stock Available Spare parts OPV valves spring type 1 A11918029 0.61 € This is the spring which is located at the over pressure valves and elbow of the wings This spring has the same diameter at both sides, up and down, 24mm Add to cart
En Stock Available Spare parts OPV valves spring type 2 legacy parts 0.60 € This is the spring which is located at the over pressure valves and elbow of the wings This spring is asymmetric, one side has 22mm of diameter and the other one 17mm of diameter Add to cart
En Stock Last items in stock Seals ORUST Lock Ring 60173 9.08 € Lock Ring for the ORUST Neck system. Add to cart
En Stock Available SI TECH Oval Stiff Ring 10.77 € ANTARES Oval Stiff Ring for attachment of ANTARES to QCS Oval Item no: 60250; Old version (only for QCS Oval, does not work with ANTARES system) Item no: 60260; New, ANTARES prepared version Add to cart
En Stock Available SPARE PARTS Protective cap for cejn q.conn valves 21008 2.35 € Protective cap for inflation valve studs. Option 1: Ref. 21008 standard size for Apeks and Sitech valves with universal connection (7.7mmø) Option 2: Ref. 21007 slightly bigger measure for connectors (studs) type CEJN (8.9mmø) Add to cart
En Stock Available SPARE PARTS PU-Ring Sitech 60251 13.31 € PU-Ring used in the systems: QCS Oval, ANTARES, VIRGO Add to cart
En Stock Available SI TECH Quick Neck de Sitech Sitech 60190 87.12 € The flexibility of the Quick Neck is superior in comparasion to the Neck Tite, which makes it more suited for drysuits with thin fabric designs. The benefits in comfort are obvious and the movement pattern of the user is not harmed Add to cart
En Stock Available Spare parts Rubber O-ring to fix the inflator hose A11918012 5.00 € Rubber O-ring to fix the inflator on left chest D-ring Add to cart
En Stock Available Spare parts Rubber ring for harness and D-Ring A11918092 4.01 € Rubber Ring with 8,0 mmø section, 50mm outer diameter and 85mm inner diameter.This ring is used in OMS wing equipment to keep the D-Rings of the pockets in a 90º position. It is also used in harnesses to stop different elements that we have mounted. Add to cart
En Stock Available Seals Rubber sealing tape 61370 4.99 € Rubber tape for use in sealing the sleeves and necks of dry suits.Available in 25mm and 40mm wide. 1 meter long Add to cart
En Stock Available Accessories & spare parts S.S. Pin for Tattoo and Tribe mask 2pc A12118018 1.99 € Add to cart
En Stock New Available Spare parts Scubapro 2nd stage Diaphragm 10.29 € Diaphragm for Scubapro second stages. Choose the necessary option from the drop-down menu following the relationship in the following list: Option 1: S600, S550, G500, R390, R380, R290, S270 Option 2: A700 Option 3: D420 (3 pieces: diaphragm, disc and disc insert) Option 4: R195, G260 Option 5: R295, R395, R095 Option 6: G250, R190 Option 7: X650,... Add to cart
Fuera de Stock -20% Ask us about availability inicio Scubapro A1 and A2 Metal Strap 05.064.015 188.00 € 235.01 € Add to cart
Fuera de Stock -20% Ask us about availability inicio Scubapro A1 and A2 Nato Strap 05.064.020 52.80 € 66.01 € Add to cart
En Stock -18% Available inicio Scubapro Aladin A1-A2 Silicone Wrist Strap Correa A1-A2 54.12 € 66.01 € NOTE: The price is for the strap, the computer is not included Add to cart
Fuera de Stock New Ask us about availability Spare Parts & Accessories Scubapro BPI Prior 2013 Spare Parts 2.42 € Spare parts for the Scubapro end inflator control (BPI), model prior to 2013 Study the diagram carefully and choose the necessary parts according to the numbered relationship, also explained in the list below. Please note that spare parts are NOT returnable. 1: 65cm hose (go to this link to get this part) 2: O-Ring 3: NOT AVAILABLE 4: Retaining ball... Add to cart
En Stock Available Spare Parts & Accessories Scubapro BPI Quick Connect 21.626.013 28.00 € Add to cart
Fuera de Stock Ask us about availability inicio Scubapro Buckle Protectors 24.105.000 10.50 € The sleeve slides over the quick-adjust buckle, protecting it from bumps from transport and flying debris. NOTE: The mask visible in the photo IS NOT INCLUDED Add to cart
Fuera de Stock New Ask us about availability Spare parts Scubapro Cover Plastic R105 11.332.036 15.73 € Add to cart
Fuera de Stock New Ask us about availability Spare Parts & Accessories Scubapro Elbow and OPV for jackets 3.39 € Replacement elbows and OPV-drain valves for Scubapro jackets. Spare parts are common for almost all jacket models, with only a few exceptions. If you have any questions about compatibility with your model, please contact us before placing your order. Choose the necessary spare part from the drop-down menu according to the numbering in the diagram. Part... Add to cart
En Stock New Available Scubapro wings spare parts Scubapro Ergo Nut Set 22.247.101 13.55 € Housings for the backplate-wing fastening handles of the Scubapro wing kits Add to cart
En Stock New Available Spare parts Scubapro Exhaust Valve for 2nd stages type A, S, R, C 11.250.103P 7.74 € Exhaustion Tee for the second stages: A700 all models S600 all models S620 all models G250 all models G260 all models C370 R195 all models R105 all models R095 all models Add to cart
Fuera de Stock Ask us about availability inicio Scubapro G2 and Aladin Square Strap 06.204.468 18.79 € Add to cart
Fuera de Stock New Ask us about availability Spare parts Scubapro G250V 2nd stage Cover 11.261.020 26.62 € Add to cart
En Stock New Available Spare parts Scubapro G250V 2nd stage exhaust cover 11.261.024 10.89 € Add to cart
En Stock New Available Accessories-spare parts Scubapro Go Sport Skegs 6.70 € These skegs work to minimize sideslip and maximize stability when kicking and maneuvering in the water. Fins come standard with either silver or black skegs. However, optional skegs are available in a variety of colors for customization or to color-code sizing. These skegs works with the Seawing Supernova and Go Sport fins Supplied in packs of 4 units Add to cart
En Stock Available inicio Scubapro INT to DIN Conversion Kit, Universal 10.045.030 59.99 € Conversion Kit Universal (MK10, MK14, MK16, MK17, MK18, MK20, MK25) This adapter allows you to easily convert your first stage, if required, so you can use your own gear rather than rental gear! Add to cart
En Stock Available inicio Scubapro Mask Strap with velcro 24.700.010 11.00 € Enjoy your dives wearing a mask decked out with a neoprene hook & loop strap. These straps are easy to use and ultra-comfortable. Makes quick and easy work of donning your mask, even when wearing gloves. Replaces silicone strap. Attached with hook & loop straps to your mask buckles. Add to cart
En Stock New Available Tools and grease Scubapro Nut Socket Tool 43.191.107 61.71 € 25mm hexagonal wrench especially indicated for removing the YOKE connection nut of all Scubapro regulators. It is also valid for Cressi YOKE regulators 6mm Allen connection for the driver stud Add to cart
En Stock Available inicio Scubapro O-Ring Kit for BPI Inflator End 21.626.045 18.00 € O-Ring kit for Scubapro Tek-BPI Inflator System (Tek, Balance and more...) Add to cart
Fuera de Stock Ask us about availability inicio Scubapro Regulator Repair Tool 43.040.000 87.12 € This professional emergency tool performs 13 different functions for Scubapro regulators. The handle protects your hand from pins, when this section of the tool is not used. Made of high impact machined plastic with just about everything you will need to remove a first stage plug, tighten a low pressure hose to a regulator, loosen a BCD hose and much... Add to cart
Fuera de Stock New Ask us about availability Accessories-spare parts Scubapro Seawing Nova Buckle Body 25.712.002 7.00 € Add to cart
Fuera de Stock New Ask us about availability Accessories-spare parts Scubapro Seawing Nova Buckle Body Cover 25.712.001 7.00 € Add to cart
Fuera de Stock New Ask us about availability Accessories-spare parts Scubapro Seawing Nova Bungee Cord 7.41 € 4 lengths available S: 245mm M: 255mm L: 265mm XL: 275mm Add to cart
Fuera de Stock New Ask us about availability Accessories-spare parts Scubapro Seawing Nova Complete Fin Strap 49.01 € Add to cart
Fuera de Stock New Ask us about availability Accessories-spare parts Scubapro Seawing straps (pair) 25.557.001 31.00 € Replaceable self-adjusting bungee heel straps for Seawing and Seawing Supernova fins allow for a versatile fit and make these high-performing fins easy to don and doff. Features: New heavy-duty bungee for added durability. Adjustable strap position with 3 options to find the perfect fit. Sold as a pair. Available in Midi size only. Add to cart
En Stock New Available Accessories-spare parts Scubapro Seawing Supernova lock plate set (pair) 25.558.001 8.40 € Lock plate set includes 2 right and 2 left lock plates for assembling your Seawing Supernova. Add to cart
En Stock New Available Accessories-spare parts Scubapro Seawing Supernova Tool 25.550.001 11.80 € Included with every pair of Seawing Supernova Fins, this key-fob style multi-purpose tool is all you need to easily assemble and disassemble your Supernovas. Smart lever (screwdriver tip) easily removes lock plates from fins. Molded in reinforced plastic. Blue colour for visibility in your dive bag. Fin strap buckle adjustment: pin pusher & puller... Add to cart
En Stock Available inicio Scubapro Smart Tec-Tec-Prime-One-Digital 330... Strap 06.201.851 18.79 € Strap for Scubapro models: Smart Tec, Z, Pro, Aladin Tec, 2G, Prime, One, Digital 330 pre. 2013 Add to cart
Fuera de Stock Ask us about availability inicio Scubapro Strap ASSY for 2G, One, Sport, 3G, Digital 330, XP10, XP3G, Prime 06.204.268 18.79 € Add to cart
Fuera de Stock Ask us about availability inicio Scubapro Strap for 2G, One, Sport, 3G, Digital 330, XP10, XP3G, Prime 06.204.269 18.79 € Add to cart
Fuera de Stock Ask us about availability inicio Scubapro Strap for Galileo Sol, Luna, Terra 06.203.027 34.00 € Add to cart
En Stock New Available Spare parts Scubapro YOKE Adjustment screw 27.39 € Adjustment screw for the YOKE connections of the Scubapro 1st stages. Choose the right one for your model from the list below: Item nº1: Mk2, Mk11, Mk17, Mk21, Mk25 Item nº2: Mk16, Mk18 Item nº3: Mk19 NOTE: the thread size are common for all models, being able to use any of them with all Scubapro models Add to cart
En Stock New Available Tools and grease Scubapro YOKE Extractor Drive Tool 43.040.009 32.67 € Necessary tool to operate the YOKE core extractor tool through the YOKE termination hole of the Scubapro regulators. Suitable for use with Cressi regulators. 6mm Allen male stud for connection to extractor wrench and 12.5mm female universal connection for ratchet wrenches. Add to cart
En Stock Available Spare parts Scubapro, Silicone valve seat 11.250.221 3.99 € Silicone valve seat for Scubapro 2nd stage Add to cart
En Stock Available Spare parts Seal Ring A11918019 5.90 € Sel Ring for OMS wing manufactured before 2015. Also fits in: Halcyon, IST, Hollis, Dive Rite, etc... if you have any doubt regarding the adaptability, please, contact us. Add to cart
Fuera de Stock Ask us about availability inflation and exhaust valves Service kit for Sitech Exhaust Valves Si-Tech 11395 18.00 € This service kit includes all necessary parts for maintenance of all SI TECH Exhaust Valves. Note! All service of SI TECH valves shall be performed by a qualified service technician. This service kit includes: Piston (item no: 11010) - 1 pcs Check valve (item no: 11003) - 1 pcs Guide sleeve (item no: 11030 - 1 pcs Membrane (item no: 10005) - 1 pcs Spring... Add to cart
En Stock Available inflation and exhaust valves Service kit for Sitech Inflation Valves Si-Tech 21120 17.38 € This service kit includes all necessary parts for maintenance of all SI TECH Inflation Valves with push button. Note! All service of SI TECH valves shall be performed by a qualified service technician. Parts included: SI TECH logo ref. 20928- 1 pc Rubber seat ref. 20004 - 1 pc Intake circle ref. 24513 - 1 pc O-ring ref. 80001 - 1 pc O-ring ref. 80002- 1... Add to cart
En Stock Available inflation and exhaust valves Service kit for Sitech Slide Inflation Valves Si-Tech 21125 12.99 € This service kit includes all necessary parts for maintenance of SI TECH Inflation Valves with slide button. This service kit includes: Intake circlip (item no: 24513) - 1 pcs O-ring (item no: 80150) - 1 pcs O-ring (item no: 80000) - 1 pcs O-ring (item no: 80198) - 1 pcs Note! All service of SI TECH valves shall be performed by a qualified service... Add to cart
En Stock Available pee-valve, condoms, quick connec Si Tech Pee-Valve Si-Tech 11920 89.00 € Extend your bottom time using a SI TECH Pee Valve. No use having loads of breathing gas when nature prevents you from concentrating. Long working hours and deco times are no longer a problem. Relieve yourself in a donned drysuit Features: Pressure compensated. Twin checkvalves for safe evacuation and no outer leakage. ON/OFF valve for easy manouever.... Add to cart
En Stock Available SI TECH Si tech QCS Oval (new version) 60918 67.83 € The QCS Oval enables quick change of torn or broken seals. This modular solution offers the user to choose from a variety of seals and sizes. The change is made in a few minutes. The QCS Oval has a oval and narrow design which decreases volume and bulk. Add to cart
En Stock New Available SI TECH Si tech QCS Oval (old versión) 60916 67.83 € The old version of the QCS Oval system is ideal if it is clear that the assembly of dry gloves will not be necessary. This version has a slightly shorter cuff fixing ring than the new QCS system and DOES NOT WORK with dry gloves systems. The QCS Oval provides the user with the opportunity of quickly changing a torn or broken seal. It also offer a... Add to cart
En Stock Last items in stock SI TECH Si tech Quick Cuff 61.56 € The Quick Cuff modular system is one of preferred by users as it not only allows us change the wrist seals by ourselves but also allows assemble the Glove Lock QCP and Quick Glove dry glove systems, both of which are contrasted safe and easy to use. Add to cart
En Stock Available SI TECH Si-Tech Boot Connection Modular Quick Change Solution 60470 45.00 € his system allows us to be able to assemble and disassemble the boots of our dry suit in a few minutes. This is very useful in cases of requiring the use of different types of boots depending on the work to be done or, the replacement of the boot and / or sock when it needs repair and without the need to send the complete suit to the workshop and be able... Add to cart
En Stock Available Seals Si-Tech Melco Tape T5500 22mm 61372 3.87 € Sitech Melco T 5500 22mm sealing tape is used for dry suit arrangements. It is of great quality and easy application. Its docility makes it perfect to be able to handle it and apply it correctly on site. In addition, its exterior texture adds a touch of quality to the finish. The tape is sold in 50cm sections. likewise, the price corresponds to a 50cm... Add to cart
En Stock Available inicio Si-Tech Wax / Paraffin 61357-50 6.41 € Wax/paraffin for drysuit zippers and Quick Glove Dry Glove system. Add to cart
Fuera de Stock Out-of-Stock SI TECH Si-Tech Wax / Paraffin (soap bar shape) 61357 5.99 € Specific Sitech paraffin wax for application on the zippers of dry and semi-dry suits and on the entry surfaces of Sitech dry glove systems. Soap bar shape 80 x 45 x 20 mm View
En Stock Available SPARE PARTS Sitech ANTARES Support Ring 60266 2.94 € The Support Ring solves locking problems that might occur when the ANTARES Dry Glove System is mounted in drysuits with short arm lengths or when the ANTARES user is wearing heavy duty undergarments.The Support Ring will guide the latch arms of the ANTARES Glove Ring on its path towards the locking grooves of the ANTARES Oval Stiff Ring. It will at the... Add to cart
En Stock Available inflation and exhaust valves Sitech attach tool for dump valves 18417 35.09 € Specific tool to attach the Sitech dump valves. It is composed of two parts and made of resistant Delrin The models that require this tools are: Sitech on/off valve Sitech Cuff Dump Valve Sitech low profile Dump valve Sitech String Dump Valve Sitech Pee-Valve Add to cart
En Stock Available SI TECH Sitech Combi Tool 60165 17.47 € TECHNICAL SPECIFICATION The Combi tool simplifies handling of the most common drysuit components manufactured by SI TECH: Tightening/detachment of drysuit Valves and Dump Valves Attachment/detachment of neck seal in the Quick Neck system as well as the Neck Tite system Detachment of wrist seal in the QCS Oval system Combi tool Manual movie:... Add to cart
En Stock Available SI TECH Sitech Cuff Dump Valve 13300 19.00 € Non adjustable (not spring loaded). One way flow Dump Valve without any adjustment. Controlled by Check valve. No On / Off function. Designed to fit SI TECH Valve ports. (Valve port is not included).SI TECH does not recommend this valve as the only valve on drysuits. Dump Valves should be used in combination with a SI TECH Exhaust Valve. Add to cart
En Stock Available SI TECH Sitech Equalization tube Sitech 60233 2.12 € Equalization tube for Dry Glove systems. Equalization tube should be used to allow air to flow between the suit and the glove during the dive. NOTE: the price is for only on tube Add to cart
Fuera de Stock Ask us about availability SI TECH Sitech Glove Lock QCP 60520 121.00 € Glove Lock QCP is a heavy duty Dry Glove System for professional-, technical- as well as recreational divers. Glove Lock QCP can be used with Quick Cuff for those who wants the possibility to change wrist seals instantly. The Glove Lock QCP can be fitted directly on latex seals also. Manual Note! Gloves not included! Add to cart
En Stock Available SI TECH Sitech Glove Lube 60540 6.90 € Glove Lube for lubrication of ANTARES and Glove Lock QCP Dry Glove system. Add to cart
En Stock Available SI TECH Sitech Latex Wrist Seal 8.13 € Latex Wrist Seal with bottleneck shape and standard sleeve circumference. Available in four sizes: X-small, Small, Medium and Large Add to cart
En Stock Available inflation and exhaust valves Sitech Male nipple 7.94 € TECHNICAL SPECIFICATION Available in Int´l and CEJN type versionAvailable in two Int´l versions (one for Shell/Skeleton Inflation Valve and one for Slide Inflaton Valve) O-ring is included Item no: 25207: Int´l, for Shell Inflation Valve (NOT LONGER AVAILABLE, HAS BEEN REPLACED BY ITEM. 21101) Item no: 21101: Int´l, for Shell Inflation Valve Item no:... Add to cart
En Stock Last items in stock SI TECH Sitech NEVA 60760 104.87 € NEVA is a round "pull over" Dry Glove System that connects with the PU-Ring of SLÄGGÖ Flex Ring. NEVA is an easy to use Dry Glove System, designed to perform - no matter the diving environment. The glove can be secured with an o-ring. CONTENTS LIST OF THE SET Add to cart
En Stock Available SI TECH Sitech Quick Clamp Sitech 60930 23.10 € Docking system for latex seals xed to the suit. Quick Clamp makes your drysuit compatible with the Quick Glove system. Attaches to the latex seals of the drysuit without tools or glue. Comes with a variety of Spanner Rings suited for a variety of seals. Instructions manual (1a): Add to cart
En Stock New Available SPARE PARTS Sitech Quick Cuff Stiff Ring Sitech 60200 8.65 € Quick Cuff seals base Add to cart
En Stock New Available SPARE PARTS Sitech Quick Cuff Wrist Ring (PU-Ring) Sitech 60420 10.42 € PU-Ring used in the systems Quick Cuff Add to cart
En Stock Available SI TECH Sitech Silflex wrist Seal 9.61 € Extremely flexible - tremendously increased well being, one size fits a wide range of wrists. Less sizes to stock. Less strain to wrist. Great material stability - better against ageing and UV light. Better for allergies. Less friction (antifriction coat on the inside). Two sizes and two colors available NOTE! The price (9,2€) is for ONLY ONE UNIT and... Add to cart
En Stock Available inflation and exhaust valves Sitech Skeleton inflation valve 56.74 € Two options available 21780 ref.: hight push button 21730 ref.: low profile botton Add to cart
Fuera de Stock Ask us about availability SI TECH Sitech Slide inflation valve 48.07 € The Slide Inflation Valve is a high performance valve suitable for all areas of recreational and technical diving. The design of the housing makes it easy to locate and the slide button ables the diver to inflate a smooth flow of gas and fully control the buoyancy. The construction of the filter lid makes the Slide Inflation Valve suitable to use in... Add to cart
Fuera de Stock Out-of-Stock Spare parts Sitech String Dump Valve 13350WN 36.30 € Spring loaded Dump Valve with twin check valves and cord. Intended for use in inflatable units such as rebreathers, lift bags, BCD´s etc. Double check valves reduce water intrusion to a minimum. A moving pressure plate prevents the check valve from tacking to the spring retainer when dumping manually.This Dump Valve is designed to be fitted in a Weld nut. View
En Stock Available pee-valve, condoms, quick connec Sitech TRIGON, Pee-Valve 138.85 € Use a Pee Valve and extend your bottom time. No use having loads of breathing gas when nature prevents you from concentrating. Long working hours and deco times are no longer a problem. Relieve yourself in a donned drysuit! Add to cart
En Stock Available pee-valve, condoms, quick connec Sitech TRIGON, Pee-Valve Tube 11951 20.59 € Use a Pee Valve and extend your bottom time. No use having loads of breathing gas when nature prevents you from concentrating. Long working hours and deco times are no longer a problem. Relieve yourself in a donned drysuit! Add to cart
En Stock Available inflation and exhaust valves Sitech Valve Attachment Tool (1 unit) Sitech 18222 8.90 € Valve Attachment Tools are recommended to enhance the grip when detaching and/or reattaching SI TECH valves and Blanking plug. Note! Sold in pcs, not a pair. Two pcs are needed for most valves. Add to cart
En Stock Available SI TECH Sitech Weld nut 11032 7.67 € This Weld nut is intended for welded attachment of valves. The Weld nut demands an O-ring for proper sealing properties. (O-ring item no: 80088 included.) TECHNICAL SPECIFICATION PU Outer diameter: 64 mm Inner thread: M33 x 1,5 Fits all SI TECH valves Note: the color could be black or translucent white. The two sides of the port are shown, the price... Add to cart
Fuera de Stock Ask us about availability SI TECH Sitech, Anti-friction washer 11016 2.95 € Anti-friction washer for Inflation and Exhaust Valves. TECHNICAL SPECIFICATION Outer diameter: 64 mm Inner diameter: 33,5 cm For all Inflation and Exhaust Valves Add to cart
En Stock Available SI TECH Sitech, external rubber valve port 60805 11.04 € External Valve port for attachment to trilaminate- and rubber drysuits. TECHNICAL SPECIFICATION Neoprene rubber Outer diameter: 100 mm Inner diameter: 33 mm Dual groove Fits all SI TECH valves NOTA: La imagen muestra las dos caras del asiento, el precio mostrado corresponde a un asiento. Add to cart
En Stock Available SI TECH Sitech, external valve port 75mmø 60885 6.49 € This Valve port can either be glued or welded to trilaminate drysuits. TECHNICAL SPECIFICATION Polyurethane Outer diameter: 75 mm Inner diameter: 33 mm Dual groove Fits all SI TECH valves Add to cart
En Stock Available inflation and exhaust valves Sitech, external valve port 85mmø 60895 5.61 € This Valve port can either be glued or welded to trilaminate drysuits. TECHNICAL SPECIFICATION Polyurethane Outer diameter: 85 mm Inner diameter: 33 mm Dual groove Fits all SI TECH valves Add to cart
En Stock Available SI TECH Sitech, External Valve port with flange 60810 7.67 € External Valve port for attachment to neoprene drysuits. Valve ports with elevated rear flange are designed to be attached in a hole that is just a little smaller than the flange and the neoprene is to be glued onto the flange. TECHNICAL SPECIFICATION Neoprene rubber Outer diameter: 100 mm Inner diameter: 33 mm Dual groove Elevated rear flange Fits all... Add to cart
En Stock Available SI TECH Sitech, Inner Glove, Kleven 11.35 € Kleven Inner glove is a thin and flexible inner glove with very good thermal capability. Knitted with polyester hollow fiber (97 %) and spandex (3 %). Advanced materials and deliberate design ensures the best heat insulation and a faster drying time than comparable materials. Short cuff. Tight around the wrist (low risk of getting stuck in locking... Add to cart
En Stock Available SI TECH Sitech, Internal Valve Port 60852-cut 3.65 € Internal valve port used in the installation of Sitech valves. Add to cart
Fuera de Stock Ask us about availability SI TECH Sitech, ORUST neck ring 60174 29.25 € Neck Ring for the ORUST Neck system. Add to cart
Fuera de Stock Ask us about availability SI TECH Sitech, ORUST Neck System 83.49 € ORUST Neck System is the third generation of Neck System. An even softer and more flexible Modular Quick Change Solution for the neck! The design provides superb comfort and can be mounted in a great range of garments. Add to cart
En Stock Available SI TECH Sitech® LIANA 60780 124.64 € LIANA is a user friendly and versatile squeeze-on Dry Glove system. SLÄGGÖ Flex Ring works as attachment platform for LIANA. Don by squeezing. Doff by turning the release ring with one hand. Benefits User friendly Self supported Accomodating most hands Sturdy construction. Add to cart
Fuera de Stock -23% Ask us about availability SI TECH Sitech® OBERON 60770 95.97 € 124.64 € OBERON is a round Dry Glove System that connects with the PU-Ring of SLÄGGÖ Flex Ring. OBERON is an easy to use Dry Glove System, designed to perform - no matter the diving environment. OBERON Dry Glove System is a bayonet system that is easy to lock and release. Add to cart
En Stock Available SI TECH SLÄGGÖ Flex Ring 86.21 € SLÄGGÖ Flex Ring is a flexible Modular Quick Change Solution. The design provides superb comfort and is able to be mounted in a great range of garments. The system has a circular shape, so there is no need of indexation/orientation during installation Add to cart
En Stock Available SI TECH Virgo & Glove Lock QCP, Ring sitech 60523 7.99 € Ring spare part. This ring is used in the dry glove systems Virgo and Glove Lock QCP Add to cart
En Stock Available SI TECH VIRGO & Glove Lock Spanner ring 4.60 € These spanner rings fits with your VIRGO and Glove Lock dryglove systems. There are four different sizes of spanner rings: The Yellow one is the more thin: for thicks gloves (ref. 60535) The Blue is a bit more thick: for medium gloves (ref 60536) The Green one, a bit more thick: for medium plus gloves (ref 60537) And the Red, the thickest: for thin... Add to cart
En Stock Last items in stock SI TECH VIRGO, Sitech 124.63 € VIRGO is a round Dry Glove System that connects with the PU-Ring of QCS Oval. It provides the recreational diver with an easy to mount, easy to use Dry Glove System, designed to performe - no matter the diving environment. The VIRGO Dry Glove System can be used together with a great variety of dry gloves. Add to cart